As filed with the Securities and Exchange Commission on April 14, 2026 UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 20-F ☐ REGISTRATION STATEMENT PURSUANT TO SECTION 12(b) OR 12(g) OF THE SECURITIES EXCHANGE ACT OF…
As filed with the Securities and Exchange Commission on April 14, 2026
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 20-F
☐
REGISTRATION STATEMENT PURSUANT TO SECTION 12(b) OR 12(g) OF THE
SECURITIES EXCHANGE ACT OF 1934
OR
☒
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES
EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2025
OR
☐
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES
EXCHANGE ACT OF 1934
OR
☐
SHELL COMPANY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE
SECURITIES EXCHANGE ACT OF 1934
Date of event requiring this shell company report
Commission file number 001–37928
南茂科技股份有限公司
(Exact Name of Registrant as Specified in Its Charter)
ChipMOS TECHNOLOGIES INC.
(Translation of Registrant’s Name into English)
Republic of China
(Jurisdiction of Incorporation or Organization)
No. 1, R&D Road 1, Hsinchu Science Park
Hsinchu 300-092, Taiwan, Republic of China
(Address of Principal Executive Offices)
Silvia Su
Vice President, Finance and Accounting Management Center
ChipMOS TECHNOLOGIES INC.
No. 1, R&D Road 1, Hsinchu Science Park
Hsinchu 300-092, Taiwan, Republic of China
Telephone: +886-3-577-0055
Facsimile: +886-3-566-8970
(Name, Telephone, E-mail and/or Facsimile Number and Address of Company Contact Person)
Securities registered or to be registered pursuant to Section 12(b) of the Act:
Title of Each Class
Trading
Symbol(s)
Name of Each Exchange
on Which Registered
Common Shares, par value NT$10 per shareIMOSThe NASDAQ Global Select Market*
Securities registered or to be registered pursuant to Section 12(g) of the Act:
None
(Title of Class)
Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act:
None
(Title of Class)
Indicate the number of outstanding shares of each of the issuer’s classes of capital or common stock as of the close of the period covered
by the annual report.
As of December 31, 2025, 699,983,126 Common Shares, par value NT$10 each, were outstanding.
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒
If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13
or 15(d) of the Securities Exchange Act of 1934. Yes ☐ No ☒
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities
Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has
been subject to such filing requirements for the past 90 days. Yes ☒ No ☐
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to
Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required
to submit such files). Yes ☒ No ☐
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or an emerging
growth company. See definition of “large accelerated filer”, “accelerated filer”, and “emerging growth company” in Rule 12b-2 of the Exchange
Act. :
Large Accelerated Filer☒Accelerated Filer☐Non-Accelerated Filer☐Emerging growth company☐
If an emerging growth company that prepares its financial statements in accordance with U.S. GAAP, indicate by check mark if the
registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided
pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of
its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public
accounting firm that prepared or issued its audit report. ☒
If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant
included in the filing reflect the correction of an error to previously issued financial statements. ☐
Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based
compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐
Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing.
U.S. GAAP ☐International Financial Reporting Standards as issued
by the International Accounting Standards Board ☒
Other ☐
If “Other” has been checked in response to the previous question, indicate by check mark which financial statement item the registrant has
elected to follow.
Item 17 ☐ Item 18 ☐
If this is an annual report, indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange
Act). Yes ☐ No ☒
- Not for trading, but only in connection with the listing on the NASDAQ Global Select Market of American Depositary Receipts evidencing
American Depositary Shares (the “ADSs”), each representing 20 common shares of ChipMOS TECHNOLOGIES INC.
TABLE OF CONTENTS
ChipMOS TECHNOLOGIES INC.
CAUTIONARY STATEMENT FOR PURPOSES OF THE “SAFE HARBOR” PROVISIONS OF THE PRIVATE SECURITIES
LITIGATION REFORM ACT OF 1995 1
PART I 3
Item 1.Identity of Directors, Senior Management and Advisers 3
Item 2.Offer Statistics and Expected Timetable3
Item 3.Key Information3
Item 4.Information on the Company16
Item 4A.Unresolved Staff Comments42
Item 5.Operating and Financial Review and Prospects42
Item 6.Directors, Senior Management and Employees53
Item 7.Major Shareholders and Related Party Transactions 58
Item 8.Financial Information58
Item 9.The Offer and Listing59
Item 10.Additional Information59
Item 11.Quantitative and Qualitative Disclosure about Market Risk72
Item 12.Description of Securities Other Than Equity Securities 73
PART II 75
Item 13.Defaults, Dividend Arrearages and Delinquencies 75
Item 14.Material Modifications to the Rights of Security Holders and Use of Proceeds75
Item 15.Controls and Procedures75
Item 16A.Audit Committee Financial Expert76
Item 16B.Code of Ethics76
Item 16C.Principal Accountant Fees and Services76
Item 16D.Exemptions from the Listing Standards for Audit Committees76
Item 16E.Purchases of Equity Securities by the Issuer and Affiliated Purchasers76
Item 16F.Change in Registrant’s Certifying Accountant 77
Item 16G.Corporate Governance77
Item 16H.Mine Safety Disclosure79
Item 16I.Disclosure Regarding Foreign Jurisdictions that Prevent Inspections79
Item 16J.Insider Trading Policies79
Item 16K.Cybersecurity79
PART III 81
Item 17.Financial Statements81
Item 18.Financial Statements81
Item 19.Exhibits81
1
CAUTIONARY STATEMENT FOR PURPOSES OF THE “SAFE HARBOR” PROVISIONS OF
THE PRIVATE SECURITIES LITIGATION REFORM ACT OF 1995
Except for historical matters, the matters discussed in this Annual Report on Form 20-F are forward-looking statements that are
subject to a number of significant risks and uncertainties and are based on information as of the date hereof. These statements are
generally indicated by the use of forward-looking terminology such as the words “anticipate”, “believe”, “estimate”, “expect”, “intend”,
“may”, “plan”, “project”, “will”, “could”, “might”, “should” and other words and phrases of similar import that express an indication of
actions or results of actions that may or are expected to occur in the future. These statements appear in a number of places throughout this
Annual Report on Form 20-F and include statements regarding our intentions, beliefs or current expectations concerning, among other
things, our results of operations, financial condition, liquidity, prospects, growth, strategies and the industries in which we operate.
By their nature, forward-looking statements involve risks and uncertainties because they relate to events and depend on
circumstances that may or may not occur in the future. Forward-looking statements are not guarantees of future performance and our
actual results of operations, financial condition and liquidity, and the development of the industries in which we operate may differ
materially from those made in or suggested by the forward-looking statements contained in this Annual Report on Form 20-F. Important
factors that could cause those differences include, but are not limited to:
•the volatility of the semiconductor industry and the market for end-user applications for semiconductor products;
•overcapacity in the semiconductor assembly and testing markets;
•the increased competition from other companies and our ability to retain and increase our market share;
•our ability to successfully develop new technologies and remain a technological leader;
•our ability to maintain control over capacity expansion and facility modifications;
•our ability to generate growth or profitable growth;
•our ability to hire and retain qualified personnel;
•our ability to acquire required equipment and supplies to meet customer demand;
•our ability to raise debt or equity financing as required to meet certain existing obligations;
•our reliance on the business and financial condition of certain major customers;
•the success of any of our future acquisitions, investments or joint ventures;
•the outbreak of contagious disease and occurrence of earthquakes, typhoons and other natural disasters, as well as industrial
accidents;
•the political stability of the regions in which we conduct operations;
•general local and global economic and financial conditions;
•the potential impact of the Coronavirus Disease 2019 (“COVID-19”) pandemic on our operations or the operations of our
supply chain or our customers; and
•other factors set forth under the heading “Item 3. Key Information—Risk Factors” of this Annual Report on Form 20-F.
The factors identified above are believed to be important factors (but not necessarily all of the important factors) that could cause
actual results to differ materially from those expressed in any forward-looking statement made by us. Other factors not discussed herein
could also have material adverse effects on us. All forward-looking statements included in this Annual Report on Form 20-F are expressly
qualified in their entirety by the foregoing cautionary statements. We undertake no obligation to update any forward-looking statement (or
its associated cautionary language), whether as a result of new information or future events.
Forward-looking statements include, but are not limited to, statements regarding our strategy and future plans, future business
condition and financial results, our capital expenditure plans, our capacity expansion plans, our investments in Mainland China,
technological upgrades, investment in research and development, future market demand, future regulatory or other developments in our
industry. Please see “Item 3. Key Information—Risk Factors” for a further discussion of certain factors that may cause actual results to
differ materially from those indicated by our forward-looking statements.
2
EXCHANGE RATES
References to “US$” and “US dollars” are to United States dollars and references to “NT$” and “NT dollars” are to New Taiwan
dollars. This Annual Report on Form 20-F contains translations of certain NT dollar amounts into US dollars at specified rates solely for
the convenience of the reader. Unless otherwise noted, all translations from NT dollars to US dollars and from US dollars to NT dollars
were made at the noon buying rate in the City of New York for cable transfers in NT dollars per US dollar as certified for customs
purposes by the Federal Reserve Bank of New York as of December 31, 2025, which was NT$31.37 to US$1.00. We make no
representation that the NT dollar or US dollar amounts referred to in this Annual Report on Form 20-F could have been or could be
converted into US dollars or NT dollars, as the case may be, at any particular rate or at all.
3
PART I
Item 1. Identity of Directors, Senior Management and Advisers
Not applicable.
Item 2. Offer Statistics and Expected Timetable
Not applicable.
Item 3. Key Information
Capitalization and Indebtedness
Not applicable.
Reasons for the Offer and Use of Proceeds
Not applicable.
Risk Factors
Risks Relating to Economic Conditions and the Financial Markets
Global inflation and financial markets disruptions could materially and adversely affect our business and results of operations.
Disruptions in tariff, interest rate rising, financial markets and trade tensions may occur that causes diminished liquidity and limited
availability of credit, reduced consumer confidence, reduced economic growth, increased unemployment rates and uncertainty about
economic stability. Limited availability of credit in financial markets may lead consumers and businesses to postpone spending. This in
turn may cause our customers to cancel, decrease or delay their existing and future orders with us. Particularly, the economics uncertainty
caused by trade tensions and inflation, which led the weakness of macro-economic environment, will impact the end product market
demand. The softness in broader market demand including smart phones, TVs, PC/servers and other consumer products, directly affects
the inventory elimination of our customers. The decrease in segment revenue of display panel driver semiconductor assembly and testing
services was principally due to the weakness of macro-economic environment, softness in market demand.
Financial difficulties experienced by our customers or suppliers as a result of these conditions could lead to production delays and
delays or defaults in payment of accounts receivable. We are not able to predict the occurrence, frequency, duration or extent of
disruptions in global inflation and financial markets, or when the trade tensions could be settled down. These conditions increase the
difficulty of accurately forecasting and planning our business activities. If these conditions and uncertainties occur or continue, or if credit
and financial markets and confidence in economic conditions deteriorate, our business and results of operations could be materially and
adversely affected.
Meanwhile, conflicts in the Middle East, including conflicts affecting key energy transit routes, could contribute to volatility in
global energy prices. This conflict increases global inflation risks and may influence central bank interest rate decisions, adding further
economic uncertainty. If these conditions and uncertainties occur or continue, our business and results of operations could be materially
and adversely affected.
Risks Relating to Our Industry
Because we depend on the highly cyclical semiconductor industry, which is characterized by significant and sometimes prolonged
downturns from time to time, our revenue and earnings may fluctuate significantly, which in turn could adversely affect our results of
operations and could cause the market price of our common shares or of our ADSs to decline.
Because our business is, and will continue to be, dependent on the requirements of semiconductor companies for independent
assembly and testing services, any downturn in the highly cyclical semiconductor industry may reduce demand for our services and
adversely affect our results of operations. All of our customers operate in this industry and variations in order levels and in service fee
from our customers may result in volatility in our revenue and earnings. For instance, during periods of decreased demand for assembled
semiconductors, some of our customers may simplify, delay or forego final testing of certain types of semiconductors, which in turn may
result in reduced demand for our services, adversely affecting our results of operations. From time to time, the semiconductor industry has
experienced significant, and sometimes prolonged, downturns which have adversely affected our results of operations. We cannot give
any assurances that there will not be any downturn in the future or that any future downturn will not materially and adversely affect our
results of operations.
4
Any deterioration in the market for end-user applications for semiconductor products would reduce demand for our services and may
result in a decrease in our earnings.
Market conditions in the semiconductor industry track, to a large degree, those for their end-user applications. Any deterioration in
the market conditions for the end-user applications of semiconductors we test and assemble could reduce demand for our services and, in
turn, could materially adversely affect our financial condition and results of operations. Our revenue is largely attributable to fees derived
from testing and assembling semiconductors for use in personal computers, communications equipment, consumer electronic products,
automotive and display applications. A significant decrease in demand for products in these markets could put pricing pressure on our
assembly and testing services and negatively affect our revenue and earnings. Any significant decrease in demand for end-user
applications of semiconductors will negatively affect our revenue and earnings.
A decline in average selling prices for our services could result in a decrease in our earnings.
Historically, prices for our assembly and testing services in relation to any given semiconductor tend to decline over the course of
its product and technology life cycle. See also “— A decrease in market demand for LCD, OLED, automotive panel and other display
panel driver semiconductors may adversely affect our capacity utilization rates and thereby negatively affect our profitability”. If we
cannot reduce the cost of our assembly and testing services, or introduce higher-margin assembly and testing services for new package
types, to offset the decrease in average selling prices for our services, our earnings could decrease.
A reversal or slowdown in the outsourcing trend for semiconductor assembly and testing services could reduce our profitability.
Integrated device manufacturers, or IDMs, continue to increasingly outsource stages of the semiconductor production process,
including assembly and testing, to independent companies like us to shorten production cycles. In addition, the availability of advanced
independent semiconductor manufacturing services has also enabled the growth of so-called “fabless” semiconductor companies that
focus exclusively on design and marketing and outsource their manufacturing, assembly and testing requirements to independent
companies. A substantial portion of our revenue is indirectly generated from providing semiconductor assembly and testing services to
these IDMs and fabless companies. We cannot assure you that these companies will continue to outsource their assembly and testing
requirements to independent companies like us. A reversal of, or a slowdown in, this outsourcing trend could result in reduced demand for
our services, which in turn could reduce our profitability.
Higher raw material costs and electricity charge rate increase would raise our cost and could reduce our profitability.
Our semiconductor assembly and testing operations rely on a variety of materials. Substantially all of the raw materials used in our
memory and logic/mixed-signal semiconductor assembly processes consist of interconnect materials such as leadframes, organic
substrates, gold wire and molding compound. Raw materials used in the display panel driver semiconductor assembly and testing process
include gold, carrier tape, resin, spacer tape, plastic reel, aluminum bags, and inner and outer boxes. These processes involve the use of
gold, silver, copper and substrate, the costs of which are subject to market volatility. Fluctuations in raw metal and substrate costs have
increased our material cost of assembly. Meanwhile, Taiwan’s electricity charge rate increased over time also raised our assembly and test
cost. If we are unable to increase our OSAT price nor pass through such cost increases due to industry condition or others reason, it would
adversely impact our gross margin and reduce our profitability.
Extra-tariffs in semiconductor content coming out of Taiwan could impact our business and reduce our profitability.
In February 2025, President Trump announced a plan to impose extra-tariffs on semiconductors. Despite the extra-tariffs in
semiconductor content coming out of Taiwan would not directly impact our business nor gross profit based on currently business model,
however the end-users may restructure the supply chain to areas or countries that are not imposed extra-tariffs to reduce their cost, which
could impact our further business. Furthermore, the end-customers maybe seek the opportunity for semiconductor supply chain absorbing
the extra-tariffs to maintain their competition, that will reduce our revenue and gross profit.
On March 11, 2026, the United States Trade Representatives announced the initiation of investigations regarding the acts, policies
and practices of various economies, including Taiwan, under Section 301(b) of the Trade Act of 1974. This investigation, expected to
conclude by July 2026, could lead to unilateral retaliatory measures, including higher tariffs, which would significantly impact Taiwan’s
export-oriented electronics and mechanical industries. Any retaliatory measures announced against Taiwan could negatively affect our
revenue and earnings.
5
Risks Relating to Our Business
If we are unable to compete effectively in the highly competitive semiconductor assembly and testing markets, we may lose customers
and our income may decline.
The semiconductor assembly and testing markets are very competitive. We face competition from a number of IDMs with in-house
assembly and testing capabilities and other independent semiconductor assembly and testing companies. Our competitors may have access
to more advanced technologies and greater financial and other resources than we do. Many of our competitors have shown a willingness
to reduce prices quickly and sharply in the past to maintain capacity utilization in their facilities during periods of reduced demand. In
addition, an increasing number of our competitors conduct their operations in lower cost centers in Asia such as Mainland China. Any
renewed or continued erosion in the prices or demand for our assembly and testing services, particularly for display panel driver
semiconductor as a result of increased competition could adversely affect our profits.
We are highly dependent on the market for memory products. A downturn in market prices for these products could significantly
reduce our revenue and profit.
A significant portion of our revenue is derived from testing and assembling memory semiconductors. In the past, our service fees
for testing and assembling memory semiconductors were sharply reduced in tandem with the decrease in the average selling price of
DRAM, NOR Flash and NAND Flash in the semiconductor industry. Oversupply of DRAM, NOR Flash or NAND Flash products and
weak demand in the DRAM, NOR Flash or NAND Flash market may result in significant reductions in the price of DRAM, NOR Flash
or NAND Flash products, which in turn may drive down the average prices for our assembly and testing services for DRAM, NOR Flash
and NAND Flash products and further reduce our revenue and profit. We cannot assure you that there will not be further downturns in
DRAM, NOR Flash or NAND Flash prices in the future.
A decrease in market demand for LCD, OLED, automotive panel and other display panel driver semiconductors may adversely affect
our capacity utilization rates and thereby negatively affect our profitability.
Our assembly and testing services for Display panel driver semiconductors generated revenue of NT$7,822 million, NT$7,319
million and NT$5,870 million (US$187 million) in 2023, 2024 and 2025, respectively. We invested NT$1,757 million, NT$2,258 million
and NT$814 million (US$26 million) in 2023, 2024 and 2025, respectively, on equipment for chip-on-film, or COF and chip-on-glass, or
COG, technologies, which are used in assembly and testing services for LCD, OLED, automotive panel and other display panel driver
semiconductors. Most of this equipment may not be used for technologies other than COF or COG. The demand went down since second
half of 2025 due to customer inventory adjustment for market softness, and demand is expected to remain weak in 2026. Any significant
decrease in demand for these products and our related services would significantly impact our capacity utilization rates. That may result in
our inability to generate sufficient revenue to cover the depreciation expenses for the equipment used in testing and assembling LCD,
OLED, automotive panel and other display panel driver semiconductors, thereby negatively affecting our profitability. See also “—
Because of our high fixed costs, if we are unable to achieve relatively high capacity utilization rates, our earnings and profitability may be
adversely affected”.
Our significant amount of indebtedness and interest expense will limit our cash flow and could adversely affect our operations.
We have a significant level of debt and interest expense. As of December 31, 2025, we had approximately NT$12,765 million
(US$407 million) outstanding long-term indebtedness. Our long-term indebtedness as of December 31, 2025, represented bank loans with
an interest rate from 1.525% to 1.975%. As of December 31, 2025, NT$8,658 million (US$276 million) of our indebtedness was secured
by collateral comprised of our assets.
Our significant indebtedness poses risks to our business, including the risks that:
•we may have to use a substantial portion of our consolidated cash flow from operations to pay principal and interest on our
debt, thereby reducing the funds available for working capital, capital expenditures, acquisitions and other general corporate
purposes;
•insufficient cash flow from operations may force us to sell assets, or seek additional capital, which we may be unable to do at
all or on terms favorable to us;
•our ability to sell assets or seek additional capital may be adversely affected by security interests in our assets granted to our
lenders as collateral; and
•our level of indebtedness may make us more vulnerable to economic or industry downturns.
For additional information on our indebtedness, see “Item 5. Operating and Financial Review and Prospects—Liquidity and Capital
Resources”.
6
Our results of operations may fluctuate significantly and may cause the market price of our common shares or of our ADSs to be
volatile.
Our results of operations have varied significantly from period to period and may continue to vary in the future. Among the more
important factors affecting our quarterly and annual results of operations are the following:
•our ability to accurately predict customer demand, as we must commit significant capital expenditures in anticipation of
future orders;
•our ability to quickly adjust to unanticipated declines or shortfalls in demand and market prices for our assembly and testing
services, due to our high percentage of fixed costs;
•changes in prices for our assembly and testing services;
•volume of orders relative to our assembly and testing capacity;
•capital expenditures and production uncertainties relating to the roll-out of new assembly and testing services;
•our ability to obtain adequate assembly and testing equipment on a timely basis;
•changes in costs and availability of raw materials, equipment and labor;
•changes in our product mix; and
•earthquakes, global new virus epidemic, climate change and other natural disasters, as well as industrial accidents.
Because of the factors listed above, our future results of operations or growth rates may be below the expectations of research
analysts and investors. If so, the market price of our common shares or of our ADSs, and the market value of your investment, may fall.
We rely on key customers for a substantial portion of our revenue and a loss of, or deterioration of the business from, or delayed
payment by, any one of these customers could result in decreased revenue and materially adversely affect our results of operations and
financial condition.
We rely on a small group of customers for a substantial portion of our business. In 2025, our top five customers collectively
accounted for 61% of our revenue. As part of our strategy, we have been focusing on sales to key customers through long-term service
agreements. We also focus on our business with smaller customers and customers who do not place orders on a regular basis. We expect
that we will continue to rely on a relatively limited number of customers for a significant portion of our revenue. Any adverse
development in our key customers’ operations, competitive position or customer base could materially reduce our revenue and materially
adversely affect our business and profitability.
Semiconductor companies generally rely on service providers with whom they have established relationships to meet assembly and
testing needs. New customers usually require us to pass a lengthy and rigorous qualification process. Accordingly, if we lose any of our
key customers, we may not be able to replace them in a timely manner. If any of our key customers reduces or cancels its orders or
terminates existing contractual arrangements, and if we are unable to attract new customers and establish new contractual arrangements
with existing or new customers, our revenue could be reduced and our business and results of operations may be materially adversely
affected.
Because of our high fixed costs, if we are unable to achieve relatively high capacity utilization rates, our earnings and profitability
may be adversely affected.
Our operations are characterized by a high proportion of fixed costs. For memory and logic/mixed-signal semiconductor testing
services, our fixed costs represented 50%, 47% and 47% of our total cost of revenue in 2023, 2024 and 2025, respectively. For memory
and logic/mixed-signal semiconductor assembly services, our fixed costs represented 26%, 25% and 23% of our total cost of revenue in
2023, 2024 and 2025, respectively. For Display panel driver semiconductor assembly and testing services, our fixed costs represented
59%, 58% and 61% of our total cost of revenue in 2023, 2024 and 2025, respectively. For bumping services, our fixed costs represented
19%, 17% and 14% of our total cost of revenue in 2023, 2024 and 2025, respectively. Our profitability depends in part not only on
absolute pricing levels for our services, but also on the utilization rates for our assembly and testing equipment, commonly referred to as
“capacity utilization rates”. Increases or decreases in our capacity utilization rates can significantly affect our gross margins as unit costs
generally decrease as the fixed costs are allocated over a larger number of units. In the past, our capacity utilization rates have fluctuated
significantly as a result of the fluctuations in the market demand for semiconductors. If we fail to increase or maintain our capacity
utilization rates, our earnings and profitability may be adversely affected. In addition, the long-term assembly and testing services
agreements we entered with certain customers may require us to incur significant capital expenditures. If we are unable to achieve high
capacity utilization rates for the equipment purchased pursuant to these agreements, our gross margins may be materially and adversely
affected.
7
The assembly and testing process is complex and our production yields and customer relationships may suffer as a result of defects or
malfunctions in our testing and assembly equipment and the introduction of new packages.
Semiconductor testing and assembly are complex processes that require significant technological and process expertise.
Semiconductor testing involves sophisticated test equipment and computer software. We develop computer software to test our
customers’ semiconductors. We also develop conversion software programs that enable us to test semiconductors on different types of
testers. Similar to most software programs, these software programs are complex and may contain programming errors or bugs. In
addition, the testing process is subject to human error by our employees who operate our test equipment and related software. Any
significant defect in our testing or conversion software, malfunction in our test equipment or human error could reduce our production
yields and damage our customer relationships.
The assembly process involves a number of steps, each of which must be completed with precision. Defective packages primarily
result from:
•contaminants in the manufacturing environment;
•human error;
•equipment malfunction;
•defective raw materials; or
•defective plating services.
These and other factors have, from time to time, contributed to lower production yields. They may do so in the future, particularly
as we expand our capacity or change our processing steps. In addition, to be competitive, we must continue to expand our offering of
packages. Our production yields on new packages typically are significantly lower than our production yields on our more established
packages. Our failure to maintain high standards or acceptable production yields, if significant and prolonged, could result in a loss of
customers, increased costs of production, delays, substantial amounts of returned goods and related claims by customers. Further, to the
extent our customers have set target production yields, we may be required to compensate our customers in a pre-agreed manner. Any of
these problems could materially adversely affect our business reputation and result in reduced revenue and profitability.
Because of the highly cyclical nature of our industry, our capital requirements are difficult to plan. If we cannot obtain additional
capital when we need it, we may not be able to maintain or increase our current growth rate and our profits will suffer.
As our industry is highly cyclical and rapidly changing, our capital requirements are difficult to plan. To remain competitive, we
may need capital to fund the expansion of our facilities as well as to fund our equipment purchases and research and development
activities. To meet our liquidity, capital spending and other capital needs, we have taken and plan to take certain measures to generate
additional working capital and to save cash. See “Item 5. Operating and Financial Review and Prospects—Liquidity and Capital
Resources”. We cannot assure you that these plans and measures will be implemented or will provide sufficient sources of capital.
In addition, future capacity expansions or market or other developments may require additional funding. Our ability to obtain
external financing in the future depends on a number of factors, many of which are beyond our control. They include:
•our future financial condition, results of operations and cash flows;
•general market conditions for financing activities by semiconductor assembly and testing companies; and
•economic, political and other conditions in Taiwan and elsewhere.
If we are unable to obtain funding in a timely manner or on acceptable terms, our growth prospects and potential future profitability
will suffer.
Disputes over intellectual property rights could be costly, deprive us of technologies necessary for us to stay competitive, render us
unable to provide some of our services and reduce our opportunities to generate revenue.
Our ability to compete successfully and achieve future growth will depend, in part, on our ability to protect our proprietary
technologies and to secure, on commercially acceptable terms, critical technologies that we do not own. We cannot assure you that we
will be able to independently develop, or secure from any third party, the technologies required for our assembly and testing services. Our
failure to successfully obtain these technologies may seriously harm our competitive position and render us unable to provide some of our
services.
8
Our ability to compete successfully also depends on our ability to operate without infringing upon the proprietary rights of others.
The semiconductor assembly and testing industry is characterized by frequent litigation regarding patent and other intellectual property
rights. We may incur legal liabilities if we infringe upon the intellectual property or other proprietary rights of others. We are not able to
ascertain what patent applications have been filed in the United States or elsewhere, however, until they are granted. If any third party
succeeds in its intellectual property infringement claims against us or our customers, we could be required to:
•discontinue using the disputed process technologies, which would prevent us from offering some of our assembly and testing
services;
•pay substantial monetary damages;
•develop non-infringing technologies, which may not be feasible; or
•acquire licenses to the infringed technologies, which may not be available on commercially reasonable terms, if at all.
Any one of these developments could impose substantial financial and administrative burdens on us and hinder our business. We
are, from time to time, involved in litigation in respect of intellectual property rights. Any litigation, whether as plaintiff or defendant, is
costly and diverts our resources. If we fail to obtain necessary licenses on commercially reasonable terms or if litigation, regardless of the
outcome, relating to patent infringement or other intellectual property matters occurs, our costs could be substantially increased to impact
our margins. Any such litigation could also prevent us from testing and assembling particular products or using particular technologies,
which could reduce our opportunities to generate revenue.
If we are unable to obtain raw materials and other necessary inputs from our suppliers in a timely and cost-effective manner, our
production schedules would be delayed and we may lose customers and growth opportunities and become less profitable.
Our operations require us to obtain sufficient quantities of raw materials at acceptable prices in a timely and cost-effective manner.
We source most of our raw materials, including critical materials like leadframes, organic substrates, epoxy, gold wire and molding
compound for assembly, and tapes for COF, from a limited group of suppliers. We purchase all of our materials on a purchase order basis
and have no long-term contracts with any of our suppliers. From time to time, suppliers have extended lead times, increased the price or
limited the supply of required materials to us because of market shortages. Consequently, we may, from time to time, experience
difficulty in obtaining sufficient quantities of raw materials on a timely basis. In addition, from time to time, we may reject materials that
do not meet our specifications, resulting in declines in output or yield. Although we typically maintain at least two suppliers for each key
raw material, we cannot assure you that we will be able to obtain sufficient quantities of raw materials and other supplies of an acceptable
quality in the future. It usually takes from three to six months to switch from one supplier to another, depending on the complexity of the
raw material. If we are unable to obtain raw materials and other necessary inputs in a timely and cost-effective manner, we may need to
delay our production and delivery schedules, which may result in the loss of business and growth opportunities and could reduce our
profitability.
If we are unable to obtain additional assembly and testing equipment or facilities in a timely manner and at a reasonable cost, we may
be unable to fulfill our customers’ orders and may become less competitive and less profitable.
The semiconductor testing and assembly business is capital intensive and requires significant investment in expensive equipment
manufactured by a limited number of suppliers. The market for semiconductor assembly and testing equipment is characterized, from time
to time, by intense demand, limited supply and long delivery cycles. Our operations and expansion plans depend on our ability to obtain
equipment from a limited number of suppliers in a timely and cost-effective manner. We have no binding supply agreements with any of
our suppliers and we acquire our assembly and testing equipment on a purchase order basis, which exposes us to changing market
conditions and other significant risks. Semiconductor assembly and testing also requires us to operate sizable facilities. If we are unable to
obtain equipment or facilities in a timely manner, we may be unable to fulfill our customers’ orders, which could negatively impact our
financial condition and results of operations as well as our growth prospects. Currently, we do not have any long-term service agreements
that require our commitment to acquire additional assembly and testing equipment or facilities. We cannot assure you, however, that such
commitment will not be made in the future. See “Item 4. Information on the Company—Customers”.
If we are unable to manage the expansion of our operations and resources effectively, our growth prospects may be limited and our
future profitability may be reduced.
We expect to continue to expand the operations and to increase the number of employees. Rapid expansion puts a strain on our
managerial, technical, financial, operational and other resources. As a result of our expansion, we will need to implement additional
operational and financial controls and hire and train additional personnel. We cannot assure you that we will be able to do so effectively in
the future, and our failure to do so could jeopardize our expansion plans and seriously harm our operations.
9
Laws of the Republic of China may be less protective of shareholder rights than laws of the United States or other jurisdictions.
Our corporate affairs are governed by our Articles of Incorporation and laws governing corporations incorporated in the Republic of
China (“ROC”). The rights of our shareholders to bring shareholders’ suits against us or our Board of Directors under the ROC law are
more limited than those of the shareholders of U.S. corporations. For example, the ROC Company Act requires that a shareholder that
continuously holds at least 1% of our issued and outstanding shares for at least 6 months may request our audit committee to institute an
action against a director on the Company’s behalf. In addition, the controlling shareholders of U.S. corporations owe fiduciary duties to
minority shareholders, while controlling shareholders in ROC corporations do not. Therefore, our shareholders may be less able under the
ROC law than they would be under the laws of the United States or other jurisdictions to protect their interests in connection with actions
by our management, members of our Board of Directors or our controlling shareholder.
It may be difficult to bring and enforce lawsuits against us in the United States.
We are incorporated in the ROC and a majority of our directors and most of our officers are not residents of the United States. A
substantial portion of our assets is located outside the United States. As a result, it may be difficult for our shareholders to serve notice of
a lawsuit on us or our directors and officers within the United States. Because most of our assets are located outside the United States, it
may be difficult for our shareholders to enforce in the United States judgments of United States courts. Any United States judgments
obtained against us will not be enforced by ROC courts if any of the following situations shall apply to such final judgment:
•the court rendering the judgment does not have jurisdiction over the subject matter under the ROC law;
•the judgment was rendered by default, except where the summons or order necessary for the commencement of the action was
duly served on us within the jurisdiction of the court rendering the judgment within a reasonable period of time and in
accordance with the laws and regulations of such jurisdiction, or with judicial assistance of the ROC;
•the judgment or the court procedures resulting in the judgment are contrary to the public order or good morals of the ROC; or
•the judgments of ROC courts are not recognized and enforceable in the jurisdiction of the court rendering the judgment on a
reciprocal basis.
Investor confidence and the market price of our common shares or ADSs may be adversely impacted if we are unable to maintain
effective Internal Control over Financial Reporting in accordance with Section 404 of the Sarbanes-Oxley Act of 2002.
We are required to comply with the ROC and US securities laws and regulations in connection with internal controls. As a public
company in the United States, our management is required to assess the effectiveness of our internal control over financial reporting using
the criteria established in Internal Control – Integrated Framework (2013) issued by Committee of Sponsoring Organization of the
Treadway Commission (COSO), as required by Section 404 of the Sarbanes-Oxley Act of 2002. We carried out an evaluation, under the
supervision and with the participation of management, including our President, the principal executive officer and Vice President of the
Finance and Accounting Management Center, the principal financial officer of the effectiveness of our internal controls over financial
reporting as of December 31, 2025, and concluded those internal controls over financial reporting were effective as of that date. See “Item
15. Controls and Procedures” for more information. Moreover, even if our management concludes that our internal controls over our
financial reporting are effective, our independent public registered accounting firm may disagree. If our independent public registered
accounting firm is not satisfied with our internal controls over our financial reporting or the level at which our controls are documented,
designed, operated or reviewed, or if the independent public registered accounting firm interprets the requirements, rules or regulations
differently from us, it may decline to attest our effectiveness of internal controls over financial reporting or may issue an adverse opinion
in the future. Any of these possible outcomes could result in an adverse reaction in the financial marketplace due to a loss of investor
confidence in the reliability of our consolidated financial statements, which ultimately could negatively impact the market prices of our
common shares or ADSs.
Any environmental claims or failure to comply with any present or future environmental regulations, or any new environmental
regulations, may require us to spend additional funds, may impose significant liability on us for present, past or future actions, and
may dramatically increase the cost of providing our services to our customers.
We are subject to various laws and regulations relating to the use, storage, discharge and disposal of chemical by-products of, and
water used in, our assembly and gold bumping processes. Although we have not suffered material environmental claims in the past, a
failure or a claim that we have failed to comply with any present or future regulations could result in the assessment of damages or
imposition of fines against us, suspension of production or a cessation of our operations or negative publicity. New regulations could
require us to acquire costly equipment or to incur other significant expenses. Any failure on our part to control the use of, or adequately
restrict the discharge of, hazardous substances could subject us to future liabilities that may materially reduce our earnings.
10
Fluctuations in exchange rates could result in foreign exchange losses.
Currently, we are nearly 52% of revenue denominated in US dollars. Our cost of revenue and operating expenses, on the other hand,
are incurred in several currencies, including NT dollars, Japanese yen and US dollars. In addition, a substantial portion of our capital
expenditures, primarily for the purchase of LCD, OLED, automotive panel and other display panel driver semiconductor, assembly and
testing equipment, has been, and is expected to continue to be, denominated in US dollars with much of the remainder in Japanese yen.
We also have debt denominated in NT dollars, Japanese yen, and US dollars. Fluctuations in exchange rates, primarily among the US
dollar, the NT dollar and the Japanese yen, will affect our costs and operating margins in NT dollar terms. In addition, these fluctuations
could result in exchange losses and increased costs in NT dollar terms. Despite selective hedging and other techniques implemented by us,
fluctuations in exchange rates have affected, and may continue to affect, our financial condition and results of operations.
We may not be successful in our acquisitions, investments, joint ventures and dispositions, and may therefore be unable to implement
fully our business strategy.
To implement our business strategy requires us to enter into acquisition, investment, joint venture and disposition transactions.
These transactions may not be successful to maintain or grow our business. On December 21, 2023, the Company’s Board of Directors
approved its wholly-owned subsidiary, ChipMOS TECHNOLOGIES (BVI) LTD., (“ChipMOS BVI”) to sell its entire 45.0242% equity
interests in Unimos Microelectronics (Shanghai) Co., Ltd. (“Unimos Shanghai”) for a total sale price of RMB 979.3 million in cash.
Under the agreement, ChipMOS BVI sold its entire remaining 45.0242% equity interests in Unimos Shanghai to Suzhou Oriza PuHua
ZhiXin Equity Investment Partnership (L.P.) and other local Chinese investment management companies. In May 2024, the equity
transfer of Unimos Shanghai had completed. Please see “Item 5. Operating and Financial Review and Prospects—Recent Acquisition” for
additional information.
The success of our acquisitions, investments, joint ventures and dispositions depends on a number of factors, including:
•our ability to identify suitable investment, acquisition, joint venture or disposition opportunities;
•our ability to reach an agreement for an acquisition, investment, joint venture or disposition opportunity on terms that are
satisfactory to us or at all;
•the extent to which we are able to exercise control over the acquired or joint venture company;
•our ability to align the economic, business or other strategic objectives and goals of the acquired company with those of our
company; and
•our ability to successfully integrate the acquired or joint venture company or business with our company.
If we are unsuccessful in our acquisitions, investments, joint ventures and dispositions, we may not be able to implement fully our
business strategy to maintain or grow our business.
We rely on key personnel, and our revenue could decrease and our costs could increase if we lose their services.
We depend on the continued service of our executive officers and skilled engineering, technical and other personnel. We will also
be required to hire a substantially greater number of skilled employees in connection with our expansion plans. In particular, we depend
on a number of skilled employees in connection with our LCD, OLED, automotive panel and other display panel driver semiconductor
assembly and testing services, and the competition for such employees in Taiwan is intense. We may not be able to either retain our
present personnel or attract additional qualified personnel as and when needed. Moreover, we do not carry key person insurance for any of
our executive officers nor do we have employment contracts with any of our executive officers. If we lose any of our key personnel, it
could be very difficult to find and integrate replacement personnel, which could affect our ability to provide our services, resulting in
reduced revenue and earnings. In addition, we may need to increase employee compensation levels in order to retain our existing officers
and employees and to attract additional personnel. As of February 28, 2026, 33% of the workforce at our facilities are foreign workers
employed by us under work permits that are subject to government regulations on renewal and other terms. Consequently, if the
regulations in Taiwan relating to the employment of foreign workers were to become significantly more restrictive or if we are otherwise
unable to attract or retain these workers at reasonable cost, we may be unable to maintain or increase our level of services and may suffer
reduced revenue and earnings.
11
If our information technology systems, the information technology systems of our suppliers, and the information technology systems
of service providers that share confidential information are subjected to cyberattacks by third parties around the world, our business
and operations may be severely disrupted or even shut down, and our operating results, financial condition, prospects and reputation
may also be materially and adversely affected.
Even though we have established a comprehensive internet and computer security network, we cannot guarantee that the computer
systems controlling or maintaining critical business functions will be completely protected from cyberattacks. Even if we have deployed
tools to mitigate attacks, there is still a possibility that important corporate data could be lost in the event of a cyberattack, or that
production lines could be forced to shut down until the problem is resolved. Cyberattacks can also lead to a loss or leakage of trade secrets
and other sensitive information. While we continuously review and evaluate our cybersecurity policies and procedures, we cannot
guarantee that we will not be affected by new risks and attacks in the ever-evolving cybersecurity threat environment.
Malicious hackers may also attempt to disrupt our operations, extort money from us, regain control of our computer systems, or
obtain unauthorized access to our sensitive information using new attack methods. These attacks could result in us paying compensation
or damages arising from system delays or outages, incurring substantial costs for implementing remedial and improvement measures to
further enhance network security, and could expose us to significant legal liabilities arising from legal proceedings or regulatory
investigations related to such violations.
We employ certain third-party service providers for us and our affiliates worldwide with whom we need to share highly sensitive
and confidential information to enable them to provide the relevant services. While we require such third-party service providers to
strictly fulfill the confidentiality and/or internet security requirements in our service agreements with them, there is no assurance that each
of them will comply with such obligations. Moreover, such third-party service providers may also be susceptible to cyberattacks. If we or
our service providers are not able to timely resolve the respective technical difficulties caused by such cyberattacks, or ensure the
confidentiality, integrity and availability of our data (and data belonging to our customers and other third parties) or maintain control of
our or our service providers’ computing systems, our commitments to our customers and other stakeholders may be materially impaired
and our results of operations, financial condition, prospects and reputation may also be materially and adversely affected. Please see “Item
16K. Cybersecurity” for additional information.
Risks Relating to Countries in Which We Conduct Operations
Any future outbreak of health epidemics and outbreaks of contagious diseases may materially affect our operations and business.
Any future outbreak of contagious diseases, such as avian influenza virus subtypes H5N1, H9N2 and H7N9 and swine influenza
virus subtypes H1N1 and H3N2, New Influenza A or more commonly known as the “bird flu” and “swine flu”, Severe Acute Respiratory
Syndrome (“SARS”), Middle East respiratory syndrome coronavirus (“MERS-CoV”), or COVID-19, for which there is inadequate
treatment or no known cure or vaccine, may potentially result in a quarantine of infected employees and related persons, or even
significant governmental measures being implemented to control the spread, including, among others, restrictions on travel,
manufacturing and the movement of employees in many regions of the world. The occurrence could adversely affect our operations at one
or more of our facilities or the operations of our customers or suppliers.
We cannot predict the impact that any further future outbreak of the aforementioned viruses or other diseases could have on our
business and results of operations. If any of our employees is suspected of having contracted any contagious disease, we may, under
certain circumstances, be required to quarantine such employees and the affected areas of our premises, or adhere to governmental
measures to control the spread. As a result, we may have to suspend part or all of our operations temporarily, or may experience delays in
product development, a decreased ability to support our customers, and overall lack of productivity. Our customers may also experience
closures of their manufacturing facilities or inability to obtain other components, either of which could negatively impact demand for our
solutions. In addition, any future outbreak may restrict the level of economic activity in affected regions, which may also adversely affect
our businesses. As a result, there is no assurance that any future outbreak of contagious diseases would not have a material adverse effect
on our business, financial condition and results of operations.
We face substantial political risk associated with doing business in the ROC, particularly due to the strained relations between the
ROC and the PRC, which could negatively affect our business and the market price of our common shares or ADSs.
Our principal executive offices and our assembly and testing facilities are located in the ROC. As a result, our business, financial
condition and results of operations and the market price of our common shares or ADSs may be affected by changes in the ROC
governmental policies and the political relationship between the ROC and the PRC, as well as social instability and diplomatic and social
developments in or affecting the ROC which are beyond our control. The ROC has a unique international political status. The PRC
government regards Taiwan as a province and does not recognize the legitimacy of the ROC as an independent country. Relations
between the ROC and the PRC have often been strained. In March 2005, the PRC government enacted the “Anti-Secession Law”
codifying its policy of retaining the right to use military force to gain control over Taiwan, particularly under what it considers as highly
provocative circumstances, such as a declaration of independence by Taiwan or the refusal by the ROC to accept the PRC’s stated “One
China” principle.
12
The PRC continues to ramp up pressures through various means on the ROC to accept the “One China” principle. It is uncertain
how these different measures may affect our financial condition and results of operations, and there is no assurance that any future
measures imposed by the PRC or ROC would not adversely affect our financial condition or results of operations.
Past developments related to the interaction between the ROC and the PRC have on occasion depressed the market prices of the
securities of Taiwanese or Taiwan-related companies, including our own. We cannot assure you any contentious situations between the
ROC and the PRC will resolve in maintaining the current status quo or remain peaceful. Relations between the ROC and the PRC and
other factors affecting military, political or economic stability in Taiwan could have a material adverse effect on our financial condition
and results of operations, as well as the market price and the liquidity of our common shares or ADSs.
The business and operations of our business associates and our own business operations are vulnerable to disruptions that may be
caused by natural disasters and other events.
The frequency and severity of catastrophic events, including natural disasters and severe weather has been increasing, in part due to
climate change or systemic regional geological changes that manifest in damaging earthquakes. ChipMOS has manufacturing and other
operations in locations susceptible to natural disasters, such as flooding, earthquakes, tsunamis, typhoons, and droughts that may cause
interruptions or shortages in the supply of utilities, such as water and electricity that could disrupt operations. We currently provide most
of our testing services through our facilities in the Hsinchu Science Park and the Hsinchu Industrial Park in Taiwan, and all of our
assembly services through our facility in the Southern Taiwan Science Park, which are susceptible to earthquakes, tsunamis, flooding,
typhoons, and droughts from time to time that may cause shortages in electricity and water or interruptions to our operations. Significant
damage or other impediments to these facilities as a result of natural disasters, industrial strikes or industrial accidents could significantly
increase our operating costs.
The production facilities of many of our suppliers, customers and providers of complementary semiconductor manufacturing
services, including foundries, are also located in Taiwan. If our customers are adversely affected by natural disasters or other events
occurring in or affecting these geographic areas, it could result in a decline in the demand for our assembly and testing services. If our
suppliers and providers of complementary semiconductor manufacturing services are affected by such events, our production schedule
could be halted or delayed. As a result, a major earthquake, other natural disaster, industrial strike, industrial accident or other disruptive
event occurring in or affecting Taiwan could severely disrupt our normal operation of business and have a material adverse effect on our
financial condition and results of operations.
ChipMOS has occasionally suffered power outages or surges in Taiwan caused by difficulties encountered by its electricity
supplier, the Taiwan Power Company, or other power consumers on the same power grid, which have resulted in interruptions to our
operations. Such shortages or interruptions in electricity supply could further be exacerbated by changes in the energy policy of the
government which intends to make Taiwan a nuclear-free country. Earthquake and typhoon strikes have had a substantial impact on the
semiconductor industry, such as Typhoon in July 2025, whose severe wind and heavy rain led to large-scale power outages and logistical
disruptions across western Taiwan, testing the resilience of the supply chain. We maintain a comprehensive risk management system
dedicated to the safety of people, the conservation of natural resources, and the protection of property. In order to effectively handle
emergencies and natural disasters, at each facility management has developed comprehensive plans and procedures that focus on risk
prevention, emergency response, crisis management and business continuity. All ChipMOS manufacturing factories have been ISO 14001
certified (environmental management system) and ISO 45001 certified (occupational health and safety management system).
ChipMOS pays special attention to preparedness of emergency response to disasters, such as typhoons, floods and droughts caused
by climate change, earthquakes and disruptions to water, electricity and other public utilities. We have established a company-wide
taskforce dedicated to managing the risk of a water or electricity shortage that might arise due to climate change. Despite our
preparedness, there is no assurance that any such natural disaster would not severely disrupt our normal operation of business and have a
material adverse effect on our financial condition and results of operations.
Any future outbreak of radiation-related disease as a result of nuclear power plant reactors damage caused by the Great East Japan
Earthquake of 2011 may materially adversely affect our operations and business.
The Great East Japan Earthquake of 2011 raises tremendous concerns about the possible effects of radiation emission from the
damaged nuclear power plants. Japanese official authorities are working with experts in assessing the risk and determining the best
courses of actions to implement to escape harmful radiation. The potential health effects due to exposure to harmful radiation may be
temporary or permanent harmful effects in nature.
13
Multiple radioactive gases could possibly be emitted in a situation where uranium attains a “meltdown” state, which is a severe
overheating of the core of a nuclear reactor, in which the core melts and radiation and heat are caused to escape. This would occur if the
containment system partially or fully fails. The particles that are released with the gases due to the meltdown would be the spewed
particles of iodine-131, strontium-90 and cesium-137. These might enter into a human by being swallowed, absorbed through the skin, or
inhaled. Depending on the chemical characteristics of each of these and their predilection for certain body tissues, they could cause
cancers of such organs as bones, soft tissues near bones, thyroid gland, and the bone marrow (typically known as leukemia).
Acute or very high level radiation exposure can cause a person to become very ill or to die quickly. Ionizing radiation, which is
defined as high-energy particles or electromagnetic waves that can break chemical bonds, damage humans by disrupting cellular function,
particularly in tissues with rapid growth and turnover of cells. Intense, high level and/or excessive radiation exposure may result in acute
radiation syndrome whereby harmful effects to the human body may be evidenced by skin burns, internal organ deterioration, bleeding,
vomiting, bone marrow distortion and deaths. If the radiation exposure is less intense and/or more prolonged at a lower level, then the
central nervous system, kidneys, thyroid gland, and liver may be affected. Cancer is the most well-known effect, and may affect virtually
any significantly exposed tissue.
Certain health effects due to exposure to harmful radiation does not have adequate treatment or known cure or vaccine,
consequently, may potentially result in a quarantine of infected employees and related persons, and adversely affect our operations at one
or more of our facilities or the operations of our customers or suppliers. We cannot predict the probability of any future outbreak of
radiation related diseases as a possible result of nuclear power plants damage caused by the Great East Japan Earthquake of 2011 or the
extent of the material adverse impact that this could have on our business and results of operations.
Risks Relating to Our Common Shares or ADSs
The Company’s ability to maintain its listing and trading status of common shares on the Taiwan Stock Exchange or ADSs on the
Nasdaq Stock Market is dependent on factors outside of the Company’s control and satisfaction of stock exchange requirements. The
Company may not be able to overcome such factors that disrupt its trading status of common shares on the Taiwan Stock Exchange or
ADSs on the Nasdaq Stock Market or satisfy other eligibility requirements that may be required of it in the future.
The Company became listed and commenced trading its common shares on the main board of Taiwan Stock Exchange (“TWSE”)
on April 11, 2014 and its ADSs on the Nasdaq on November 1, 2016. For a TWSE-listed and Nasdaq-listed company to continue trading
on the main board of TWSE and Nasdaq depends in part on market conditions and other factors that may not within the control of the
Company. For these reasons there can be no assurance that the Company’s shares will continue to be listed or traded on the TWSE or
ADSs will continue to be listed or traded on the Nasdaq.
Volatility in the price of our common shares or ADSs may result in shareholder litigation that could in turn result in substantial costs
and a diversion of our management’s attention and resources.
The financial markets in the United States and other countries have experienced significant price and volume fluctuations, and
market prices of technology companies have been and continue to be extremely volatile. Volatility in the price of our common shares or
ADSs may be caused by factors outside of our control and may be unrelated or disproportionate to our results of operations. Shareholders
of public companies such as the Company frequently institute securities class action litigations against companies following periods of
volatility in the market price of public company securities including common shares and ADSs. Litigation of this kind against the
Company could result in substantial costs and a diversion of our management’s attention and resources.
Certain provisions in our constitutive documents and in our severance agreements with our executive officers make the acquisition of
us by another company more difficult and costly and therefore may delay, defer or prevent a change of control.
We entered into change in control severance agreements with certain management pursuant to which we agreed to pay certain
severance payments if a change in control event (as defined in the change in control severance agreements) occurs and the employment of
such executive officer is terminated by our company other than for cause or by such executive officer for good reasons within two years
following the occurrence of the change in control event. These agreements may increase the cost of a party seeking to effect a change in
control of our company.
Future sales, pledge or issuance of common shares or ADSs by us or our current shareholders could depress our share price or ADSs
price and you may suffer dilution.
Sales of substantial amounts of common shares or ADSs in the public market, the perception that future sales may occur, or the
pledge of a substantial portion of our common shares or ADSs could depress the prevailing market price of our common shares or ADSs.
See “Item 7. Major Shareholders and Related Party Transactions—Major Shareholders” for further information about our major
shareholders.
14
The Company was listed and commenced trading of common shares on the main board of TWSE on April 11, 2014. See “—Risks
Relating to Our Common Shares or ADSs—The Company’s ability to maintain its listing and trading status of common shares on the
Taiwan Stock Exchange or ADSs on the Nasdaq is dependent on factors outside of the Company’s control and satisfaction of stock
exchange requirements. The Company may not be able to overcome such factors that disrupt its trading status of common shares on the
Taiwan Stock Exchange or ADSs on the Nasdaq or satisfy other eligibility requirements that may be required of it in the future” for
additional information on the Company’s listing on the main board of TWSE. We plan to issue, from time to time, additional shares in
connection with employee compensation and to finance possible future capital expenditures, investments or acquisitions. The issuance of
additional shares may have a dilutive effect on other shareholders and may cause the price of our common shares or ADSs to decrease.
Holders of Our ADSs do not have the same voting rights as holders of our common shares.
Under the ROC Company Act, except under limited circumstances, shareholders have one vote for each common share held. See
“Item 10. Additional Information—Voting Rights” for a discussion of voting rights of holders of our common shares. Holders of our
ADSs do not have the same voting rights as holders of our common shares. Instead, the voting rights of a holder of our ADSs are
governed by the Deposit Agreement and are able to exercise voting rights on an individual basis as follows: if a holder of our ADSs
outstanding at the relevant record date instructs the depositary to vote in a particular manner for or against a resolution, including the
election of directors, the depositary will cause all the shares represented by such holder’s ADSs to be voted in that manner. If the
depositary does not receive timely instructions from a holder of our ADSs outstanding at the relevant record date to vote in a particular
manner for or against any resolution, including the election of directors, such holders of our ADSs will be deemed to have instructed the
depositary or its nominee to give a discretionary proxy to a person designated by the Company to vote all the shares represented by such
holder’s ADSs at the discretion of such person, which may not be in the interest of holders of our ADSs.
If a non-ROC holder of our ADSs withdraws and holds our shares, such holder of our ADSs will be required to appoint a tax
guarantor, local agent and custodian in the ROC and register with the TWSE in order to buy and sell securities on the TWSE.
When a non-ROC holder of our ADSs elects to withdraw and hold our shares represented by our ADSs, such holder of our ADSs
will be required to appoint an agent for filing tax returns and making tax payments in the ROC. Such agent will be required to meet the
qualifications set by the ROC Ministry of Finance and, upon appointment, will become the guarantor of the withdrawing holder’s tax
payment obligations. Evidence of the appointment of a tax guarantor, the approval of such appointment by the ROC tax authorities and
tax clearance certificates or evidentiary documents issued by such tax guarantor may be required as conditions to such holder repatriating
the profits derived from the sale of our shares. We cannot assure you that a withdrawing holder will be able to appoint, and obtain
approval for, a tax guarantor in a timely manner.
In addition, under the current ROC law, such withdrawing holder is required to register with the TWSE and appoint a local agent in
the ROC to, among other things, open a bank account and open a securities trading account with a local securities brokerage firm, pay
taxes, remit funds and exercise such holder’s rights as a shareholder. Furthermore, such withdrawing holder must appoint a local bank or
local securities firm to act as custodian for confirmation and settlement of trades, safekeeping of securities and cash proceeds and
reporting and declaration of information. Without satisfying these requirements, non-ROC withdrawing holders of our ADSs would not be
able to hold or otherwise subsequently sell our shares on TWSE or otherwise. Appointment of an agent or a tax guarantor might also incur
additional costs.
Pursuant to Mainland investors regulations, only qualified domestic institutional investors (the “QDIIs”, each a “QDII”) or persons
that have otherwise obtained the approval from the Ministry of Economic Affairs, ROC (the “MOEA”) and registered with the TWSE are
permitted to withdraw and hold our shares from a depositary receipt facility. In order to hold our shares, such QDIIs are required to
appoint an agent and custodian as required by the Mainland investors regulations. If the aggregate amount of our shares held by any QDII
or shares received by any QDII upon a single withdrawal accounts for 10.0% of our total issued and outstanding shares, such QDII must
obtain the prior approval from the MOEA. We cannot assure you that such approval would be granted.
15
Restriction on the ability to deposit our shares into our ADR facility may adversely affect the liquidity and price of our ADSs.
The ability to deposit our shares into our ADR facility is restricted by the ROC law. Under the current ROC law, no person or
entity, including you and the Company, may deposit our shares into our ADR facility without specific approval of the Financial
Supervisory Commission of the ROC, or the FSC, unless:
(1)we pay stock dividends on our shares;
(2)we make a free distribution of our shares;
(3)holders of our ADSs exercise preemptive rights in the event of capital increases; or
(4)to the extent permitted under the Deposit Agreement and the relevant custody agreement and within the amount of depositary
receipts which have been withdrawn and canceled, investors purchase our shares, directly or through the depositary, on the
TWSE, and deliver our shares to the custodian for deposit into our ADR facility, or our existing shareholders deliver our
shares to the custodian for deposit into our ADR facility.
With respect to item (4) above, the depositary may issue our ADSs against the deposit of our shares only if the total number of our
ADSs outstanding following the deposit will not exceed the number of our ADSs previously approved by the FSC, plus any our ADSs
issued pursuant to the events described in items (1), (2) and (3) above.
In addition, in the case of a deposit of our shares requested under item (4) above, the depositary will refuse to accept deposit of such
our shares if such deposit is not permitted under any legal, regulatory or other restrictions notified by the Company to the depositary from
time to time, which restrictions may include blackout periods during which deposits may not be made, minimum and maximum amounts
and frequency of deposits.
The rights of holders of our ADSs to participate in our rights offerings are limited, which could cause dilution to your holdings.
The Company may from time to time distribute rights to its shareholders, including rights to acquire its securities. Under the
Deposit Agreement, the depositary will not offer holders of our ADSs those rights unless both the distribution of the rights and the
underlying securities to all our ADS holders are either registered under the Securities Act or exempt from the registration under the
Securities Act. Although the Company may be eligible to take advantage of certain exemptions under the Securities Act available to
certain foreign issuers for rights offering, the Company can give no assurances that it will be able to establish an exemption from
registration under the Securities Act, and it is under no obligation to file a registration statement for any of these rights. Accordingly,
holders of our ADSs may be unable to participate in our rights offerings and may experience dilution of their holdings.
If the depositary is unable to sell rights that are not exercised or not distributed or if the sale is not lawful or reasonably practicable,
it will allow the rights to lapse, in which case holders of our ADSs will receive no value for these rights.
Changes in exchanges controls which restrict your ability to convert proceeds received from your ownership of our ADSs may have an
adverse effect on the value of your investment.
Under the current ROC law, the depositary may, even without obtaining approvals from the Central Bank of the Republic of China
(Taiwan) or any other governmental authority or agency of the ROC, convert NT dollars into other currencies, including US dollars, for:
•the proceeds of the sale of common shares represented by ADSs or received as stock dividends from our shares and deposited
into the depositary receipt facility; and
•any cash dividends or cash distributions received.
In addition, the depositary may also convert into NT dollars incoming payments for purchase of common shares for deposit in ADR
facility against the creation of additional ADSs. However, the depositary may be required to obtain foreign exchange approval from the
Central Bank of the Republic of China (Taiwan) on a payment-by-payment basis for conversion from NT dollars into foreign currencies
of the proceeds from the sale of subscription rights for new common shares. We cannot assure you that any approval will be obtained in a
timely manner, or at all.
Under the ROC Foreign Exchange Control Law, the Executive Yuan of the ROC government may, without prior notice but subject
to subsequent legislative approval, impose foreign exchange controls in the event of, among other things, a material change in
international economic conditions. We cannot assure you that foreign exchange controls or other restrictions will not be introduced in the
future.
16
Item 4. Information on the Company
Overview of the Company
We are one of the leading independent providers of semiconductor assembly and testing services. Specifically, we are one of the
leading independent providers of testing and assembly services for LCD, OLED, automotive panel and other display panel driver
semiconductors and advanced memory and logic/mixed-signal products in Taiwan. The depth of our engineering expertise and the breadth
of our assembly and testing technologies enable us to provide our customers with advanced and comprehensive assembly and testing
services. In addition, our geographic presence in Taiwan is attractive to customers wishing to take advantage of the logistical and cost
efficiencies stemming from our close proximity to foundries and producers of consumer electronic products in Taiwan. Our production
facilities are located in Hsinchu and Tainan, Taiwan.
Our Structure and History
We are a company limited by shares, incorporated on July 28, 1997, under the ROC Company Act, under the name “ChipMOS
TECHNOLOGIES INC.” (“ChipMOS Taiwan”), as a joint venture company between Mosel Vitelic Inc. (“Mosel”) and Siliconware
Precision Industries Co., Ltd. (“Siliconware Precision”) and with the participation of other investors. Our operations consist of the
assembly and testing of semiconductors as well as gold bumping and memory module manufacturing. Our principal place of business is
located at No. 1, R&D Road 1, Hsinchu Science Park, Hsinchu, Taiwan, ROC and its phone number is +886-3-577-0055 and our internet
website address is “www.chipmos.com”. The Company listed and commenced trading on the main board of TWSE on April 11, 2014.
According to the merger agreement, entered between the Company and ChipMOS TECHNOLOGIES (Bermuda) LTD. (“ChipMOS
Bermuda”) dated January 21, 2016 (the “Merger Agreement”), ChipMOS Bermuda merged with and into the Company, with the
Company being the surviving company after the Merger. The transaction was accounted as capital reorganization within the Company and
its subsidiaries (the “Group”), please see “Item 5. Operating and Financial Review and Prospects—Recent Acquisitions”. Any common
shares of ChipMOS Bermuda issued and outstanding immediately prior to the effective time of the Merger was cancelled and, in
exchange, each former holder of such cancelled common shares of ChipMOS Bermuda was entitled to receive, with respect to each such
share (i) US$3.71 in cash, without interest, and (ii) 0.9355 ADSs representing 18.71 shares of the Company (each ADS representing 20
new common shares, par value of NT$10 each, to be issued by the Company) in exchange for each of ChipMOS Bermuda’s common
share held (the US$3.71 in cash and together with the ADSs, the “Merger Consideration”). The Merger was completed and effective on
October 31, 2016. The Company issued 512,405,340 common shares represented by the ADSs and the ADSs were listed on the Nasdaq
on November 1, 2016.
17
The following chart illustrates our corporate structure and our equity interest in each of our principal subsidiaries as of the date of
this Annual Report on Form 20-F.
Note:
(1)Under IFRS 10, “Consolidated Financial Statements”, we are required to consolidate the financial results of any subsidiaries in
which we hold a controlling interest or voting interest in excess of 50% or we have the power to direct or cause the direction of the
management and policies, notwithstanding the lack of majority ownership. Since 2020, we have consolidated the financial results of
ChipMOS U.S.A., Inc. (“ChipMOS USA”), ChipMOS BVI, and ChipMOS SEMICONDUCTORS (Shanghai) LTD. (“ChipMOS
Shanghai”), a wholly-owned subsidiary of ChipMOS BVI.
Agreements with Tsinghua Unigroup Ltd.
On November 30, 2016, the Equity Interest Transfer Agreements among ChipMOS BVI, a wholly-owned subsidiary of the
Company, and some strategic investors which including Unigroup Guowei, a subsidiary of Tsinghua Unigroup, were executed. Pursuant
to the Equity Interest Transfer Agreements, ChipMOS BVI would sell 54.98% equity interests of its wholly-owned subsidiary, Unimos
Shanghai, to the strategic investors, and Unigroup Guowei would hold 48% equity interests of Unimos Shanghai, and the other strategic
investors, including a limited partnership owned by Unimos Shanghai’s employees, would own approximately 6.98% equity interest of
Unimos Shanghai. The transaction was completed in March 2017. Unimos Shanghai is no longer the subsidiary of the Company
following the completion of equity interest transfer. Also pursuant to the agreement, ChipMOS BVI and the strategic investors agreed to
further invest RMB 1,074 million into Unimos Shanghai. The further investment was completed in two tranches, one in July 2017 at
RMB 687 million and one in February 2018 at RMB 387 million. On December 16, 2019, Unigroup Guowei and one of the strategic
investor sold and transferred all equity interests of Unimos Shanghai to Yangtze Memory, which holds 50% equity interests of Unimos
Shanghai after completed transaction. On May 11, 2020, one of the strategic investor sold and transferred all equity interests of Unimos
Shanghai to Yangtze Memory Technologies Co., Ltd. (“Yangtze Memory”), which holds 50.94% equity interests of Unimos Shanghai
after completed transaction. On July 24, 2023, Yangtze Memory sold and transferred all equity interests of Unimos Shanghai to Yangtze
Memory Technologies Holding Co., Ltd., (“Yangtze Memory Holding”), which holds 50.94% equity interests of Unimos Shanghai after
completed transaction.
18
Agreements with Suzhou Oriza PuHua ZhiXin Equity Investment Partnership (L.P.)
On December 21, 2023, the Company’s Board of Directors approved its wholly-owned subsidiary, ChipMOS BVI to sell its entire
45.0242% equity interests in Unimos Shanghai for a total sale price of RMB 979.3 million in cash. Under the agreement, ChipMOS BVI
sold its entire remaining 45.0242% equity interests in Unimos Shanghai to Suzhou Oriza PuHua ZhiXin Equity Investment Partnership
(L.P.) and other local Chinese investment management companies. ChipMOS BVI completed the equity interest transfer of Unimos
Shanghai in May 2024, and fully received the consideration amounted in December 2024. For additional information on the transaction,
see “Item 5. Operating and Financial Review and Prospects—Recent Acquisition”.
Our Principal Consolidated Subsidiaries
Below is a description of our principal consolidated subsidiaries:
ChipMOS TECHNOLOGIES (BVI) LTD., or formerly known as MODERN MIND TECHNOLOGY LIMITED ChipMOS BVI
was incorporated in the British Virgin Islands in January 2002.
ChipMOS SEMICONDUCTORS (Shanghai) LTD. ChipMOS Shanghai was incorporated in Mainland China in March 2020,
which is a wholly-owned subsidiary of ChipMOS BVI. It primarily engaged in providing marketing of semiconductors and electronic
related produces, for its parent company and affiliates, throughout Mainland China.
ChipMOS U.S.A., Inc. ChipMOS USA was incorporated in the United States of America in October 1999. It is primarily engaged
in providing marketing of semiconductors and electronic related produces, for its parent company and affiliates, throughout the United
States of America. ChipMOS USA began generating revenue in 2001.
Industry Background
We provide a broad range of back-end assembly and testing services. Testing services include engineering test, wafer probing and
final test of memory and logic/mixed-signal semiconductors. We also offer a broad selection of leadframe- and organic substrate-based
package assembly services for memory and logic/mixed-signal semiconductors. In addition, we provide gold bumping, reel to reel
assembly and testing services for LCD, OLED, automotive panel and other display panel driver semiconductors by employing COF and
COG technologies.
Semiconductors tested and assembled by us are used in personal computers, graphics applications such as game consoles,
communications equipment, mobile products, such as cellular handsets, tablets, consumer electronic products, automotive/industry and
display applications such as display panels. In 2025, 23.7% of our revenue was derived from testing services for memory and
logic/mixed-signal semiconductors, 28.6% from assembly services for memory and logic/mixed-signal semiconductors, 24.5% from
Display panel driver semiconductor assembly and testing services and 23.2% from bumping services for semiconductors, respectively.
In additional, stable long-term demand and high margin are basic characters of automotive application. More semiconductor chips
and display panel are consumed with the trend of popularization of automotive panels and Electric Vehicle (EV) could benefit our margin
and increase our earnings.
Semiconductor Industry Trends
Growth in the semiconductor industry is largely driven by end-user demand for consumer electronics, communications equipment
and computers. Semiconductors are critical components of these products and applications. Geopolitics and tariff pressures are
contributing factors to overall semiconductor industry supply chain inventory level increases and decreases in end-user demand, except
AI. Ongoing fluctuations in our markets related to these factors potentially affect our results of operations.
19
Memory Semiconductor Market
The potential for memory market growth is linked to anticipated memory content increases in consumer electronics, data center,
wireless base-station, PC and smartphone applications due to updated system requirements (such as 5G & wifi 6), increasing use of
storage, graphics in gaming and other applications. The memory market is dominated by two segments-DRAM and flash memory.
Potential growth in the DRAM and NAND Flash market is expected to be driven by continued growth in both the commodity and niche
DRAM market, as well as growth opportunities in mobile DRAM as memory requirements significantly increase for mobile applications
and storage requirement for data center application. Flash memory market potential growth is expected to be driven by increasing memory
requirements for cellular handsets, digital cameras, digital audio/video, server, wireless base-station and other mobile applications, and
new application demand of NOR flash for automotive/industry, OLED panel and touch with display driver integration (TDDI). However,
driven by improving demand for high-value memory solutions, particularly in data center and AI-related applications and EOL of DDR4
led memory in super cycle since second half of 2025.
LCD, OLED, automotive panel and Other Display panel Driver Semiconductor Market
Display panels are used in applications such as desktop monitors, notebooks, tables, television sets, cellular handsets and digital
cameras. The end-user demand for LCD, OLED, automotive panel and other display panel driver semiconductors tends to very over time.
The soft demand of TVs impacted our utilization level of COF assembly. Also, as more and more displays are installed in cars and EV,
more driver IC grew for automotive application in 2025.
Logic/Mixed-Signal Semiconductor Market
The communications market is one of the main drivers of potential growth in the semiconductor industry. Logic/mixed-signal
semiconductors, which are chips with analog functionality covering more than half of the chip area, are largely used in the
communications market. The increasing use of digital technology in communications equipment requires chips with both digital and
analog functionality for applications such as modems, network routers, switches, cable set-top boxes and cellular handsets. As the size and
cost of cellular handsets and other communications-related devices have decreased, components have increased in complexity.
Logic/mixed-signal semiconductors, such as LCD controller, power devices, fingerprint sensors and MEMS products, TV scaler and
DVD controllers, are also used in consumer electronic products. We plan to expand our logic and mixed-signal product portfolio from
MEMS and TV SOC products to include PMIC of DDR5 modules, logic product for smart devices serving high-tech and healthcare. We
also plan to support ASIC for AI related application products to enhance the long-term growth momentum of our logic and mixed-signal
product line. This represents a significant new market expansion opportunity. We view these as high return, multi-year opportunities with
the potential to meaningfully drive growth and create shareholder value.
Overview of the Semiconductor Manufacturing Process
The manufacturing of semiconductors is a complex process that requires increasingly sophisticated engineering and manufacturing
expertise. The manufacturing process may be broadly divided into the following stages:
20
Process
Description
Circuit DesignThe design of a semiconductor is developed by laying out circuit patterns and
interconnections.
Wafer FabricationWafer fabrication begins with the generation of a photomask, a photographic
negative onto which a circuit design pattern is etched or transferred by an electron
beam or laser beam writer. Each completed wafer contains many fabricated chips,
each known as a die.
Wafer ProbeEach individual die is then electrically tested, or probed, for defects. Dies that fail
this test are discarded, or, in some cases, salvaged using laser repair.
AssemblyThe assembly of semiconductors serves to protect the die, facilitates its integration
into electronic systems and enables the dissipation of heat. The process begins with
the dicing of the wafers into chips. Each die is affixed to a leadframe-based or
organic substrate-based substrate. Then, electrical connections are formed, in many
cases by connecting the terminals on the die to the inner leads of the package using
fine metal wires. Finally, each chip is encapsulated for protection, usually in a
molded epoxy enclosure.
Final TestAssembled semiconductors are tested to ensure that the device meets performance
specifications. Testing takes place on specialized equipment using software
customized for each application. For memory semiconductors, this process also
includes “burn-in” testing to screen out defective devices by applying very high
temperatures and voltages onto the memory device.
Outsourcing Trends in Semiconductor Manufacturing
Historically, integrated device manufacturers (“IDMs”), designed, manufactured, tested and assembled semiconductors primarily at
their own facilities. In recent years, there has been a trend in the industry to outsource various segments of stages in the manufacturing
process to reduce the high fixed costs resulting from the continuously more complex manufacturing process. Virtually every significant
stage of the manufacturing process can be outsourced. The independent semiconductor manufacturing services market currently consists
of wafer fabrication and probing services and semiconductor assembly and testing services. Most of the world’s major IDMs now use
some independent semiconductor manufacturing services to maintain a strategic mix of internal and external manufacturing capacity.
Many of these IDMs are continuously significantly reducing their investments in new semiconductor assembly and testing facilities.
The availability of technologically advanced independent semiconductor manufacturing services has also enabled the growth of
“fabless” semiconductor companies that focus exclusively on semiconductor design and marketing and outsource fabrication, assembly
and testing requirements to independent companies.
We believe the outsourcing of semiconductor manufacturing services, and in particular of assembly and testing services, will
increase for many reasons, including the following:
Significant Capital Expenditure Requirements. Driven by increasingly sophisticated technological requirements, wafer fabrication,
assembly and testing processes have become highly complex, requiring substantial investment in specialized equipment and facilities and
sophisticated engineering and manufacturing expertise. In addition, product life cycles have been shortened magnifying the need to
continuously upgrade or replace manufacturing, assembly and testing equipment to accommodate new products. As a result, new
investments in in-house fabrication, assembly and testing facilities are becoming less desirable for IDMs because of the high investment
costs, as well as difficulties in achieving sufficient economies of scale and utilization rates to be competitive with the independent service
providers. On the contrary, independent foundry, assembly and testing companies are able to realize the benefits of specialization and
achieve economies of scale by providing services to a large customer base across a wide range of products. This enables them to reduce
costs and shorten production cycles through high capacity utilization and process expertise.
Increasing Focus on Core Competencies. As the costs of semiconductor manufacturing facilities increase, semiconductor
companies are expected to further outsource wafer fabrication, assembly and testing requirements to focus their resources on core
competencies, such as semiconductor design and marketing.
Time-to-Market Pressure. Increasingly short product life cycles have amplified time-to-market pressure for semiconductor
companies, leading them to rely more and more on independent companies as a key source for effective wafer fabrication, assembly and
testing services.
21
Semiconductor Assembly and Testing Services Industry
Growth in the semiconductor assembly and testing services industry is driven by increased outsourcing of the various stages of the
semiconductor manufacturing process by IDMs and fabless semiconductor companies.
The Semiconductor Industry and Conditions of Outsourcing in Taiwan and Mainland China
Taiwan is one of the world’s leading locations for outsourced semiconductor manufacturing. The semiconductor industry supply
chain in Taiwan has developed such that the various stages of the semiconductor manufacturing process have been disaggregated, thus
allowing for specialization. The disaggregation of the semiconductor manufacturing process in Taiwan permits these semiconductor
manufacturing service providers to focus on particular parts of the production process, develop economies of scale, maintain higher
capacity utilization rates and remain flexible in responding to customer needs by lowering time-to-market pressure faced by
semiconductor companies. There are several leading service providers in Taiwan, each of which offers substantial capacity, high-quality
manufacturing, leading semiconductor wafer fabrication, test, assembly and process technologies, and a full range of services. These
service providers have access to an educated labor pool and a large number of engineers suitable for sophisticated manufacturing
industries. As a result, many of the world’s leading semiconductor companies outsource some or all of their semiconductor manufacturing
needs to Taiwan’s semiconductor manufacturing service providers and take advantage of the close proximity among facilities in the
supply chain. In addition, companies located in Taiwan are very active in the design and manufacture of electronic systems, which has
created significant local demand for semiconductor devices.
A few years ago, Mainland China had emerged as an attractive location for outsourced semiconductor manufacturing. Companies
could take advantage of strongly supports by Mainland China government to accelerate the development of the semiconductor industry
and a large domestic market. These factors had driven increased relocation of much of the electronics industry manufacturing and supply
chain to Mainland China. But according to the economics uncertainty caused by the trade tensions and US semiconductor restrictions, the
related investment risk in China is increasing. An increasing number of global electronic systems manufacturers and contract
manufacturers are relocating or have relocated production facilities away from Mainland China. However, following the supply chain
reshuffle after COVID-19, along with government subsidies and local production requirements, the competition pressure from DDIC
supplier in Mainland China has gradually increased.
Our Strategy
Our goal is to reinforce our position as a leading independent provider of semiconductor assembly and testing services,
concentrating principally on memory, logic/mixed-signal and OLED, automotive panel and other display panel driver semiconductors.
The principal components of our business strategy are set forth below.
Focus on Providing Our Services to Potential Growth Segments of the Semiconductor Industry.
We intend to continue our focus on developing and providing advanced assembly and testing services for potential growth segments
of the semiconductor industry, such as memory, logic/mixed-signal, OLED, automotive panel and other display panel driver
semiconductors and bumping services. We believe that our investments in equipment and research and development in some of these
areas allow us to offer a service differentiated from that of our competition. In order to benefit from the expected resumption of growth in
these segments, we intend to continue to invest in capacity to meet the assembly and testing requirements of these key semiconductor
market segments.
Continue to Invest in the Research and Development of Advanced Assembly and Testing Technologies.
Critical to our business growth is the continuation to expand our capabilities in testing and assembly and integrate wafer bumping
and assembly core technologies to provide turn-key total solution service to our customers. We typically focus on advanced technologies
that consist of greater potentials to generate higher margins. For example, we conducted new product introductions and on an on-going
basis continue to expand our capabilities in fine-pitch wafer bumping, multi-chip package (“MCP”) and flip chip packaging. We are also
introducing a low cost silver alloy bump products based on our intellectual property to service display panel market. We continue to
maintain close working relationships with local and overseas research institutions and universities to keep abreast with leading edge
technologies and broaden the scope of applications.
In 2026, we focus our research and development efforts in the following areas:
•Develop Eco-friendly with low curing-temperature PI materials for RDL redistribution products.
•Develop a fluxless reflow process for Cu pillar products.
•Development of ultra-fine pitch (IL pitch : 14 um) COF inner-lead flip-chip packaging technology.
•Development of enhancement the 3PB face-down die strength packaging technology for LASER product.
22
•Develop multi-chip flash memory stacked BGA packaging technology.
•Develop next-generation game card memory packaging technology.
In 2025, we spent approximately 4.5% of our revenue on research and development. We will continue to invest our resources to
recruit and retain experienced research and development personnel. As of February 28, 2026, our research and development team
comprised 651 employees.
Build on Our Strong Presence in Taiwan and Strong Industrial Position Outside Taiwan.
We intend to build on our strong presence in key centers of semiconductor and electronics manufacturing to grow our business.
Currently, most of our operations are in Taiwan, one of the world’s leading locations for outsourced semiconductor manufacturing. This
presence provides us with several advantages. Firstly, our proximity to other semiconductor companies is attractive to customers who
wish to outsource various stages of the semiconductor manufacturing process. Secondly, our proximity to many of our suppliers,
customers and the end-users of our customers’ products enables us to be involved in the early stages of the semiconductor design process,
enhances our ability to quickly respond to our customers’ changing requirements and shortens our customers’ time-to-market. Thirdly, we
have access to an educated labor pool and a large number of engineers who are able to work closely with our customers and other
providers of semiconductor manufacturing services.
Depending on customer’s demands, market conditions and other relevant considerations, we may from time to time look into other
opportunities to expand our operations outside of Taiwan.
Expand Our Offering of Vertically Integrated Services.
We believe that one of our competitive strengths is our ability to provide vertically integrated services to our customers. Vertically
integrated services consist of the integrated testing, assembly and direct shipment of semiconductors to end-users designated by our
customers. Providing vertically integrated services enables us to shorten lead times for our customers. Time-to-market and cost are
sources of competitive advantage for our customers. As a result, our customers increasingly value our ability to provide them with
comprehensive back-end services.
We are able to offer vertically integrated services for a broad range of products, including memory, logic/mixed-signal and LCD,
OLED, automotive panel and other display panel driver semiconductors. These services offerings include complementary technologies,
products and services as well as additional capacity. We believe that these will continue to enhance our own development and expansion
efforts into new and potential growth markets. We intend to establish new alliances with leading companies and, if suitable opportunities
arise, engage in merger and acquisition activities that will further expand the services we can provide.
Focus on Increasing Sales through Long-Term Agreements with Key Customers as well as Business with Smaller Customers.
From time to time, we strategically agree to commit a portion of our assembly and testing capacity to certain of our customers. We
intend to continue focus on increasing sales to key customers through long-term capacity agreements. The customers with which we
entered long-term agreements include a reputable memory customer based in the U.S. See “—Customers” below for a more detailed
discussion of these long-term agreements.
Global market and economic conditions have been unprecedented and challenging with tight credit conditions and recession in most
major economies since 2008. In the fourth quarter of 2021, a long term 3-year capacity secure agreement with our customer about high
end wafer test for OLED and other display panel driver demand was settled to reduce our investment risk. Meanwhile, driven by the
strong rebound in memory market since the second half of 2025, we finalized a long term 3-year memory wafer test capacity take-or-pay
contract in the beginning of 2026. We also resumed our focus on our business with smaller customers or customers who do not place
orders on a regular basis. We believe that the dual focused strategy will assist us to be better prepared for the current economic volatility
and ensure maximum utilization rate of our capacity and help us to develop closer relationships with all types of our customers.
23
Principal Products and Services
The following table presents, for the periods shown, revenue by service segment as a percentage of our revenue.
Year ended December 31,
2023 2024 2025
Testing 20.6% 21.9% 23.7%
Assembly 21.7% 23.8% 28.6%
Display panel driver semiconductor assembly and testing 36.6% 32.2% 24.5%
Bumping
21.1% 22.1% 23.2%
Total revenue
100.0% 100.0% 100.0%
Memory and Logic/Mixed-Signal Semiconductors
Testing
We provide testing services for memory and logic/mixed-signal semiconductors:
Memory. We provide testing services for huge amount of varieties of memory semiconductors, such as SRAM, DRAM and Flash
memory. To speed up the time-consuming process of memory product testing, we provide parallel test, which includes the completion of a
tested wafer in one touchdown (up to 3,000 plus DUTs testing simultaneously). Wafer type includes Aluminum PAD, RDL PAD, Cu
Pillar, WLCSP and prober test temperature between -55°~150° and provide 143MHz to 600 MHz test speed for DRAM product, 50MHz
~ 400 MHz test speed for FLASH product. Component type (FT) includes TSOP, BGA, LGA, WSON, SOP packages, the maximum
parallel test is 512Dut per handler with a handler test temperature range between -55°~125° and support for test speed from 70MHz to
400 MHz for FLASH products, and 250MHz to 4.5GHz for DRAM products. The memory semiconductors we tested were applying
primarily in desktop computers, laptop, tablet computers, handheld consumer electronic, devices and wireless communication devices.
Logic/Mixed-Signal. We conduct tests on a wide variety of logic/mixed-signal semiconductors, with lead counts ranging from the
single digits to over 1536 and data rate of up to 16Gbps. The semiconductors we test include high-end audio/video codec,
networking/communications, MCU, LCD related, MEMS related, DDR related and automotive electronics used for home
entertainment/media center, wearable devices, personal computer applications, network/communication, mobile smart devices and cars.
We also test a variety of application specific integrated circuits (“ASICs”), for applications such as FHD/UHD/8K LCD TVs with AI
functions, Smartphone, Tablet PC and Cars and other applications/end markets.
The following is a description of our pre-assembly testing services:
Wafer Probing. Wafer probing is a processing stage proceeding to the assembly of semiconductors and which involves visual
inspection and electrical testing to ensure the processed wafers meets our customers’ specifications. Tests are conducted using specialized
equipment with software customized for each application in different temperature conditions ranging from -55 degrees Celsius to 150
degrees Celsius. Wafer probing employs sophisticated design and manufacturing technologies to connect the terminals of each chip for
testing. Defect chips are marked on the surface or memorized in an electronic file, known as a mapping file, to the following facilitate
subsequent process.
Laser Repairing. This is a unique process in testing operation for special SOC memory products. In laser repairing, specific poly or
metal fuses are blown after wafer probing to enable a spare row or column of a memory unit in SOC the replacement of the defective
memory cell.
After assembly, we perform the following testing services:
Burn-In Testing. This process screens out unreliable products using high temperature, high voltage and prolonged stresses
environment to ensure that finished products will survive a long period of end-user service. This process is used only for memory
products. This process needs customized Burn-In board.
Top Marking. By using laser marker, the marking content were according to our customers’ specification, including the logo, part
number, date code and lot number.
Final Testing. Assembled semiconductors are tested to ensure that the devices meet performance specifications. Tests are conducted
using specialized equipment with software customized for each application in different temperature conditions ranging from -55 degrees
Celsius to 125 degrees Celsius.
24
Final Inspection and Packing. Final inspection involves visual or auto-inspection of the devices to check any bent leads, ball
damage, inaccurate markings or other package defects. Packing involves dry packing, package-in-tray, package-in-tube and tape and reel.
According to package level, Dry packing involves heating semiconductors in a tray at 125 degrees Celsius for about four to six hours to
remove the moisture before the semiconductors are vacuum-sealed in an aluminum bag. Package-in-tube involves packing the
semiconductors in anti-static tubes for shipment. Tape and reel pack involves transferring semiconductors from a tray or tube onto an anti-
static embossed tape and rolling the tape onto a reel for shipment to customers.
Assembly
Our assembly services generally involve the following steps:
Wafer LappingThe wafers are ground to their required thickness.
Die SawWafers are cut into individual dies, or chips, in preparation for the die-attach process.
Die AttachEach individual die is attached on the leadframe or organic substrate.
Wire BondingUsing gold or silver wires, to connect the I/O pads on the die to the inner lead of leadframe or
substrate.
Flip Chip BondingUsing solder bumps or Cu pillar bumps on die, to connect the leadframe or substrate pad via
soldering reflow.
MoldingThe die and wires are encapsulated to provide physical support and protection.
MarkingEach individual package is marked to provide product identification.
Dejunking and TrimmingMold flash is removed from between the lead shoulders through dejunking, and the dambar is
cut during the trimming process.
Electrical PlatingA solderable coating is added to the package leads to prevent oxidization and to keep solder
wettability of the package leads.
Ball Mount and ReflowEach electrode pad of the substrate is first printed with flux, after which solder balls are
mounted, heated and attached to the electrode pad of the substrate through a reflow oven.
Forming/SingulationForming involves the proper configuration of the device packages leads, and singulation
separates the packages from each other.
We offer a broad range of package formats designed to provide our customers with a broad array of assembly services. The
assembly services we offer customers are leadframe-based packages, which include thin small outline packages, and organic substrate-
based packages, including fine-pitch BGA.
The differentiating characteristics of these packages include:
•the size of the package;
•the number of electrical connections which the package can support;
•the electrical performance and requirements of the package; and
•the heat dissipation requirements of the package.
As new applications for semiconductor devices require smaller components, the size of packages has also decreased. In leading-
edge packages, the size of the package is reduced to just slightly larger than the size of the individual chip itself in a process known as
chip scale packaging.
As semiconductor devices increase in complexity, the number of electrical connections required also increases. Leadframe-based
products have electrical connections from the semiconductor device to the electronic product through leads on the perimeter of the
package. Organic substrate-based products have solder balls on the bottom of the package, which create the electrical connections with the
product and can support large numbers of electrical connections.
Leadframe-Based Packages. These are generally considered the most widely used package category. Each package consists of a
semiconductor chip encapsulated in a plastic molding compound with metal leads on the perimeter. This design has evolved from a design
plugging the leads into holes on the circuit board to a design soldering the leads to the surface of the circuit board.
25
The following diagram presents the basic components of a standard leadframe-based package for memory semiconductors:
To address the market for miniaturization of portable electronic products, we are currently developing and will continue to develop
increasingly smaller versions of leadframe-based packages to keep pace with continually shrinking semiconductor device sizes. Our
advanced leadframe-based packages generally are thinner and smaller, have more leads and have advanced thermal and electrical
characteristics when compared to traditional packages. As a result of our continual product development, we offer leadframe-based
packages with a wide range of lead counts and sizes to satisfy our customers’ requirements.
The following table presents our principal leadframe-based packages, including the number of leads in each package, commonly
known as lead-count, a description of each package and the end-user applications of each package.
Package
Lead-
count
Description
End-User Applications
Thin Small Outline Package I (TSOP I)48-56Designed for high volume production
of low lead-count memory devices,
including flash memory, SRAM and
MROM
Notebooks, personal computers, still
and video cameras and standard
connections for peripherals for
computers
Thin Small Outline Package II (TSOP II)44-86Designed for memory devices,
including flash memory, SRAM,
SDRAM and DDR DRAM
Disk drives, recordable optical disk
drives, audio and video products,
consumer electronics, communication
products
Quad Flat No Lead (QFN)8-132Thermal enhanced quad flat no lead
package providing small footprint (chip
scale), light weight with good thermal
and electrical performance
Wireless communication products,
notebooks, audio and video products
and consumer electronics
Low-Profile Quad Flat Package (LQFP)48Low-profile and light weight package
designed for ASICs, digital signal
processors, microprocessors/
controllers, graphics processors, gate
arrays, SSRAM, SDRAM, personal
computer chipsets and mixed-signal
devices
Wireless communication products,
notebooks, digital cameras,
cordless/radio frequency devices
Small Outline Package (SOP)8Designed for low lead-count memory
and logic semiconductors, including
SRAM and micro-controller units
Personal computers, consumer
electronics, audio and video products,
communication products
Multi-Chip Package (TSOP)44-86Our patented design for memory
devices, including flash memory,
SRAM, DRAM, SDRAM and DDR
DRAM
Notebooks, personal computers, disk
drives, audio and video products,
consumer products, communication
products
26
Package
Lead-
count
Description
End-User Applications
Flip Chip Quad Flat No Lead (FCQFN)6-35Thermal enhanced quad flat no lead
package providing small footprint (chip
scale), light weight with good thermal
and electrical performance Flip chip
process is designed for better electrical
performance compared to wire bonding
process
Wireless communication products,
notebooks, audio/video products and
consumer electronics
Organic Substrate-based Packages. As the number of leads surrounding a traditional leadframe-based package increases, the leads
must be placed closer together to reduce the size of the package. The close proximity of one lead to another can create electrical shorting
problems and requires the development of continuously more sophisticated and expensive techniques to accommodate the high number of
leads on the circuit boards.
The BGA format solves this problem by effectively creating external terminals on the bottom of the package in the form of small
bumps or balls. These balls are evenly distributed across the entire bottom surface of the package, allowing greater pitch between the
individual terminals. The ball grid array configuration enables high-pin count devices to be manufactured less expensively with less
delicate handling at installation.
Our organic substrate-based packages employ a fine-pitch BGA design, which uses a plastic or tape laminate rather than a
leadframe and places the electrical connections, or leads, on the bottom of the package rather than around the perimeter. The fine-pitch
BGA format was developed to address the need for the smaller footprints required by advanced memory devices. Benefits of ball grid
array assembly over leadframe-based assembly include:
•smaller size;
•smaller footprint on a printed circuit board;
•better electrical signal integrity; and
•easier attachment to a printed circuit board.
The following diagram presents the basic component parts of a fine-pitch BGA package:
27
The following table presents the ball-count, description and end-user applications of organic substrate-based packages we currently
assemble:
Package
Connections
Description
End-User Applications
Mini BGA24-400Low-cost and space-saving assembly
designed for low input/output count,
suitable for semiconductors that
require a smaller package size than
standard BGA
Memory, analog, flash memory,
ASICs, radio frequency devices,
personal digital assistants, cellular
handsets, communication products,
notebooks, wireless systems
Fine-Pitch BGA54-126Our patented design for DRAM
products that require high
performance and chip scale package
(CSP)
Notebooks, cellular handsets, global
positioning systems, personal digital
assistants, wireless systems
Very Thin Fine-Pitch BGA24-200Similar structure of Mini BGA
package with thinner and finer ball
pitch that is designed for use in a
wide variety of applications requiring
small size, high reliability and low
unit cost
Handheld devices, notebooks, disk
drives, wireless and mobile
communication products
Land Grid Array (LGA)11-204Thinner and lighter assembly
designed essential to standard BGA
without solder balls, suitable for
applications that require high
electrical performance
Disk drives, memory controllers,
wireless, mobile communication
products, game card, micro secure
digital card
Multi-Chip BGA24-345Designed for assembly of two or
more memory chips (to increase
memory density) or combinations of
memory and logic chips in one BGA
package
Notebooks, digital cameras, personal
digital assistants, global positioning
systems, sub-notebooks, board
processors, wireless systems
Stacked-Chip BGA24-349Designed for assembly of two or
more memory chips or logic and
memory chips in one CSP, reducing
the space required for memory chips
Cellular handsets, digital cameras,
personal digital assistants, wireless
systems, notebooks, global
positioning systems
FC Chip-scale Package (FC CSP)24-676Better IC protection and solder joint
reliability compared to direct chip
attach (DCA) and chip on board
(COB)
Memory, logic, microprocessor,
application processor (AP), baseband
(BB), solid state device, radio
frequency (RF)
Multi-Chip Hybrid Package (FC+WB)153-345Designed for assembly of two or
more memory chips or combinations
of memory and logic chips in one
BGA package with both of flip chip
and wire bonding
Universal Flash Storage (UFS), and
BGA SSD
Chip on Wafer (CoW)5-30Integrated two different functional
chips to a closer form into a compact
package. Low-cost solution compared
to through-silicon via (TSV)
Integrated MEMS
Land Grid Array (LGA) for FPS
(Finger Print Sensor)
20-52Very thin clearance (50um) between
chip & compound hard color coating
with scratch resistance for protection
and appearance matching of mobile
devices
Security protection for mobile
devices, home, notebooks, etc.
Wafer Level Chip Scale Package
(WLCSP)
4-125WLCSP package size is almost the
same as die size. Simple assembly
process flow, low cost. Small package
suitable to apply on hand-held 3C
electronic products
Electronic Compass, audio converter,
nor flash product, power control,
sensor magnetometer, CMOS Image
Sensor controller, Laser diode driver,
power manager IC (PMIC)
28
Wafer Level CSP
Wafer-level CSP (WLCSP) is the technology of packaging an integrated circuit at wafer level. WLCSP is essentially a true chip
scale package (CSP) technology, since the resulting package is practically of the same size as the die. WLCSP has the ability to enable
true integration of wafer fab, packaging, test, and burn-in at wafer level in order to streamline the manufacturing process undergone by a
device start from silicon wafer to customer shipment.
Most other kinds of packaging do wafer dicing first, and then puts the individual die in a plastic package and attaches the solder
bumps. WLCSP involves the RDL, wafer solder bumping, while still in the wafer, and then wafer dicing. Benefits of WLCSP compare to
general CSP package assembly include:
•ultimate smaller package size;
•smaller footprint on a printed circuit board;
•very short circuit connection; and
•cost effective packaging solution for small ICs.
Package
Connections
Description
End-User Applications
WLCSP4-219Very small package size (identical to
die size), suitable for the low pin
count and require the small package
size application
Memory, ASICs, PMIC, MEMS
devices, controllers, for mobile
phones, tablets, ultra book computers
and wearable products
FC CSP
29
FC Chip Scale Package (FC CSP) construction utilizes the flip chip bumping (with solder bump or Cu pillar bump) interconnection
technology to replace the standard wire-bond interconnect. It allows for a smaller form factor due to wire loop reduction and area array
bumping. FC CSP includes the substrate or leadframe type solution making an attractive option for advanced CSP application when
electrical performance is a critical factor.
•Excellent electrical performance, very low interconnect parasitics and inductance compare to wirebond type.
•High electrical current endurance (Cu pillar bump), ideal for high power and high speed logic solution.
•High electrical performance (Cu pillar bump), ideal for lower return loss and higher insertion loss.
•Reduce Bump Pitch and die size (Cu pillar bump vs. solder bump), ideal for increasing gross die/wafer.
•Smaller package form factor by reducing the wire loop height and wire span compared to conventional wirebond package.
Package
Connections
Description
End-User Applications
FC CSP24-484Superior electrical performance,
smaller form factor
Power devices, RF, High speed Logic
devices, wireless, memory or portable
applications
Display Driver Semiconductors and Gold MCB Bumping
We also offer assembly and testing services for display driver semiconductors. We employ COF and COG technologies for testing
and assembling display driver semiconductors. In addition, we offer gold bumping and metal composite bump services to our customers.
Note: Copper pillar service only for Max size: 9.9mmx9.4mm & pillar Account: 3,410
Chip-on-Film (COF) Technology
COF technology provides several additional advantages. For example, COF is able to meet the size, weight and higher resolution
requirements in electronic products, such as display panels. This is because of its structural design, including an adhesive-free two-layer
tape that is highly flexible, bending strength and its capacity to receive finer patterning pitch.
30
COF package has been using for large-size and high-resolution panel display, especially on TFT-LCD and OLED TV set and NB as
well. In recent years, there has been an observable trend with which the average inner lead pitch of COF package went down to 23um
with more than 90% of market demand. High thermal dissipation packaging technology is available for mass production. And dual IC
with high thermal dissipation COF packaging technology is ready for 8K TV market. 18um/16um inner lead pitch 2-metal layer COF
package is ready for production of coming AR/VR gear requirement. And we can test display driver semiconductors with frequency up to
6.5Gbps to fulfill high speed data rate requirement. Minus temperature COF package testing technology is in production for automotive
application requirement.
The following diagram presents the basic components of 1-metal layer COF and 2-metal layer COF:
The COF process involves the following steps:
Chip ProbingScreen out the defect chips which fail to meet the device spec.
Wafer Lapping/Polish
Laser Marking
Laser Grooving
Wafers are grounded or with polish to their required thickness.
A laser mark is applied on IC backside in wafer form to provide product traceability.
Application in wafer within Low-K material to reduce chipping of chips during dicing process.
Die SawWafers are cut into individual dies, or chips, in preparation for inner lead bonding process.
Inner Lead BondingAn inner lead bonding machine connects the chip to the printed circuit tape.
PottingAn underfill process to fill resin to protect the inner lead and chip.
Potting CureThe potting cure process matures the resin used during the potting oven with high temperatures.
MarkingA laser marker is used to provide product identification.
Final TestingTo verify device spec. within electrical testing after assembly process.
TapingTo attach heat sink/spreader or stiffener material onto COF package.
Inspection and PackingEach individual die with tape is visually or auto inspected for defects. The dies are packed within a
reel into an aluminum bag after completion of the inspection process.
Chip-on-Glass (COG) Technology
COG technology is an electronic assembly technology that is used in assembling display driver semiconductors including
TV/monitor, mobile and wearable products. Compared to the traditional bonding process for COF, the new COG technology requires
lower bonding temperature. In addition, the COG technology reduces assembly cost as it does not use tapes for interconnection between
the LCD, OLED panel and the printed circuit board. The major application of COG products is on TFT-LCD and AMOLED display of
smart phone and automotive market, it integrates source, gate driver of display driver IC (DDIC) and touch or timing Controller IC into
one chip, so the output channel is higher than COF products. For the market trend of thinner smartphone, 120um in IC thickness is
released for mass production and much thinner IC thickness is in development.
The COG assembly process involves the following steps:
Chip ProbingTo screen out the defect chips which fail to meet the device spec.
Wafer Lapping/PolishWafers are ground or with polished to their required thickness.
31
Laser MarkingA laser mark is applied on IC backside in wafer form to provide product traceability.
Laser GroovingApplication in wafer within Low-K material to reduce chipping of chips during dicing process.
Die SawWafers are cut into individual dies, or chips, in preparation for the pick and place process.
Auto Optical InspectionProcess of wafer inspection is detecting defect to separate chips at pick and place station.
Pick and PlaceEach individual die is picked and placed into a chip tray.
Inspection and PackingEach individual die in a tray is visually or auto-inspected for defects. The dies are packed within a
tray into an aluminum bag after completion of the inspection process.
Bumping
We also offer bumping services to our customers.
Based on the major product portfolio (judged by internal metal composition), we provide:
•Gold Family (Au bump, Au metal composite bump and Au RDL)
Gold bumping technology, which is in high demand for LCD driver ICs. In 2023 and 2024, gold bumping development
momentum will be emphasized on new products from OLED display penetration rate of smartphone, another focused
business is that automotive category products continue to expand. In 2025, Display driver ICs business is challenged during
geopolitical factor and major cost among of gold price is relative high cost and no sign to downward trend. We are well
positioned to introduce our next-generation Silver-Alloy bump technology, which has successfully passed panel-level
package reliability assurance (RA) verification. The objective is to complete mass-production qualification by the second
quarter of 2026. The goal is to achieve performance and reliability comparable to gold bump solutions, enabling broader
adoption in branded markets.
•RDL technology
As high speed, high performance and high accuracy requirement, many electronic devices need the capability of transferring
higher current. By using Re-distribution layer (RDL) technology which can relocate to the PKG wire bonding position where
necessary. ChipMOS can provide several electroplating metal thickness based on customer design request, including 2P1M,
2P2M and 3P2M structures. The min. Line/space of RDL could be 5/5um that makes integration of MCP and SIP achievable.
To meet higher electrical performance requirements, we have developed and mass-production-qualified thicker RDL
structures with total metal thickness up to 23.5 μm, which have been widely adopted in power and automotive applications in
2025. In parallel, our RDL platform has been expanded with flexible stack-up options, including 1M1P, 1P1M, and 1P2M,
enabling optimized routing density, electrical performance, and cost efficiency across diversified product designs. We also
continue to strengthen our capabilities in high-speed memory applications through close collaboration with leading
customers, supporting increasingly stringent signal integrity and electrical performance requirements for next-generation
memory devices.
•Cu/Solder Family (WLCSP, Lead free solder plating and Cu Pillar)
We believe that consumer electronics are driving the application growth of these processes. From small wearable gadgets,
NOR flash in TWS (True Wireless Stereo) applications, power management devices to emerging AIoT/AI development are
all included. We developed 12” WLCSP process for NOR flash to provide a thinner and smallest chip size for product trend.
In 2025, Copper pillar and flip-chip assembly remain key packaging solutions for high-performance memory and power-
related devices, with typical bump heights of 50–70 μm. Higher Copper pillar bump heights up to 100 μm are available for
power management applications, while engineering development of fine-pitch micro bump technology with bump pitch down
to 40 μm is ongoing for next-generation high-density interconnections. In addition, a new 12-inch WLCSP application for
Mini LED TV driver ICs has been qualified and entered mass production in 2025, with stable shipment momentum. Overall,
our WLCSP and Cu pillar process portfolio support diversified applications, including PMIC, wearable, storage, E-compass,
CPS (smartphone), MCU, ALS, Mini LED TV drivers, and AI-related devices.
Other Services
Drop Shipment
We offer drop shipment of semiconductors directly to end-users designated by our customers. We provide drop shipment services,
including assembly in customer-approved and branded boxes, to a majority of our assembly and testing customers. Since drop shipment
eliminates the additional step of inspection by the customer prior to shipment to end-users, quality of service is a key to successful drop
shipment service. We believe that our ability to successfully execute our full range of services, including drop shipment services, is an
important factor in maintaining existing customers as well as attracting new customers.
32
Software Conversion Program
We work closely with our customers to provide sophisticated software engineering services, including test program conversion and
related hardware design. Generally, testing requires customized testing software and related hardware to be developed for each particular
product. Software is often initially provided by the customer and then converted by us at our facilities for use on one or more of our
testing machines and contains varying functionality depending on the specified testing procedures. Once a conversion test program has
been developed, we perform correlation and trial tests on the semiconductors.
Customer feedback on the test results enables us to adjust the conversion test programs prior to actual testing. We also typically
assist our customers in collecting and analyzing the test results and recommend engineering solutions to improve customers’ design and
production processes.
Customers
We believe that the following factors have been, and will continue to be, important factors in attracting and retaining customers:
•our advanced assembly and testing technologies;
•our strong capabilities in testing and assembling DDIC/TDDI and other display panel driver semiconductors;
•our focus on high-density memory products and logic/mixed-signal communications products; and
•our reputation for high quality and reliable customer-focused services.
The number of our customers as of February 29, 2024, February 28, 2025 and February 28, 2026, respectively, was 67, 68 and 70.
Our top 15 customers in terms of revenue in 2025 were (in alphabetical order):
Asahi Kasei Microdevices Corporation
Chipone Technology (Beijing) Co., Ltd.
Elite Semiconductor Microelectronics Technology Inc.
GigaDevice Semiconductor (HK) Limited
Himax Technologies, Inc.
ILI Technology Corporation
Integrated Circuit Solution Inc.
Macronix International Co., Ltd.
MediaTek Inc.
Micron Technology, Inc.
Nanya Technology Corporation
Novatek Microelectronics Corp.
Phison Electronics Corp.
Raydium Semiconductor Corporation
Winbond Electronics Corporation
In 2023, our top three customers accounted for approximately 25%, 13% and 9% of our revenue, respectively. In 2024, our top
three customers accounted for approximately 24%, 11% and 11% of our revenue, respectively. In 2025, our top three customers accounted
for approximately 23%, 15% and 9% of our revenue, respectively.
The majorities of our customers purchase our services through purchase orders and provide us three-month non-binding rolling
forecasts on a monthly basis. The price for our services is typically agreed upon at the time when a purchase order is placed.
The following table sets forth, for the periods indicated, the percentage breakdown of our revenue, categorized by geographic region
based on the jurisdiction in which each customer is headquartered.
Year ended December 31,
2023 2024 2025
Taiwan 81% 80% 87%
Japan 6% 6% 5%
PRC 8% 7% 6%
Singapore 3% 4% 0%
Others
2% 3% 2%
Total
100% 100% 100%
33
Qualification and Correlation by Customers
Our customers generally require that our facilities undergo a stringent “qualification” process during which the customer evaluates
our operations, production processes and product reliability, including engineering, delivery control and testing capabilities. The
qualification process typically takes up to eight weeks, or longer, depending on the requirements of the customer. For test qualification,
after we have been qualified by a customer and before the customer delivers semiconductors to us for testing in volume, a process known
as “correlation” is undertaken. During the correlation process, the customer provides us with test criteria; information regarding process
flow and sample semiconductors to be tested and either provides us with the test program or requests that we develop a new or conversion
program. In some cases, the customer also provides us with a data log of results of any testing of the semiconductor that the customer may
have conducted previously. The correlation process typically takes up to two weeks, but can take longer depending on the requirements of
the customer.
Sales and Marketing
We maintain sales and marketing offices in Taiwan, the United States and Mainland China. Our sales and marketing strategy is to
focus on memory semiconductors in Taiwan, Japan, Singapore, Korea and the United States, logic/mixed-signal semiconductors in
Taiwan, Japan and the United States, LCD, OLED, automotive panel and other display panel driver semiconductors in Japan, Korea,
Taiwan, Hong Kong and Mainland China. As of February 28, 2026, our sales and marketing efforts were primarily carried out by teams of
sales professionals, application engineers and technicians, totaling 30 staff members. Each of these teams focuses on specific customers
and/or geographic regions. As part of our emphasis on customer service, these teams:
•actively participate in the design process at the customers’ facilities;
•resolve customer assembly and testing issues; and
•promote timely and individualized resolutions to customers’ issues.
We conduct marketing research through our in-house customer service personnel and through our relationships with our customers
and suppliers to keep abreast of market trends and developments. Furthermore, we do product and system bench marking analysis to
understand the application and assembly technology evolution, such as analysis on mobile handsets and Tablet, PC, wearable products. In
addition, we regularly collect data from different segments of the semiconductor industry and, when possible, we work closely with our
customers to design and develop assembly and testing services for new products. Sale will cooperate with internal technology expert to
work closely with our customers as project kick off. We provide full turnkey service (from design-in stage/design for bumping and
assembly/design for testing services) to achieve design for mass production for new products. These “co-development” or “sponsorship”
projects can be critical when customers seek large-scale, early market entry with a significant new product.
Research and Development
To maintain our competitive edge for continued business growth, we continue our focus of our investment in new technology
research and development. In 2023, 2024 and 2025, we spent approximately NT$1,093 million, or 5.1%, NT$1,163 million, or 5.1% and
NT$1,077 million (US$34 million), or 4.5%, respectively, of our revenue on research and development.
Our research and development efforts have been focused primarily on new technology instruction, improving efficiency and
production yields of our testing, assembly and bumping services. From time to time, we jointly develop new technologies with local and
international equipment and material manufacturing company to enhance the competitiveness. In testing area, our research and
development efforts focused particularly on high speed probing, fine pitch probing capability and wafer level burn-in technology. Our
projects include:
•Ramped up high frequency testing capability of LCD, OLED, automotive panel and other display panel driver
semiconductors;
•Developing full temperature range (-40ºC~125ºC) of FT testing for automotive products;
•Built up 12” fine pitch COF assembly capability for less than 18um inner lead pitch products;
•Developing more flexible COF tape assembly for full-screen display application;
•Developing “wafer level probing on copper pillar bump for 300mm wafers”; and
•Developing centralized server test control system.
In assembly and bumping areas, our research and development efforts were directed to:
•Au height reduction, as part of cost reduction drive, 10um bump height COF package and 8um bump height COG package
was released for production;
•Wafer-level chip scale packaging and 3P2M Cu RDL processes;
34
•Fine-pitch Cu RDL process for WLCSP and RDL products;
•Flip-chip CSP for DRAM and mixed-signal application;
•3P/3M Cu pillar bumping for 300mm wafers high pin count products;
•Fine pitch copper pillar process for micro bump structure;
•Thicker Cu/Ni/Au RDL and 100im tall Cu pillar for PMIC application;
•Developing fine pitch Cu RDL line width and space with 4um/4um for advanced re-distribution layer device design
requirement;
•Shrink ball size with ball mount technology and combine thinner wafer grind thickness to achieve thin WLCSP requirement;
•Dual/Multi-chip assembly and module of flash products for SSD and eMMC applications;
•Hybrid package by integration of wire binding & flip-chip process with passive components to offer total solution for UFS
device;
•DBG/SDBG implementation to enhance the capability of ultra-thin wafer lapping and dicing capabilities for stacked-die chip
scale package;
•Advanced thin core/core-free, flex substrate solutions for thin and flip chip packages;
•2-metal layers COF assembly and COF SMT capabilities;
•Qualified thermally enhanced COF and MCB COF and released for manufacturing;
•Double-sided Heat Sink/ High conductivity material development is applied in thermal packaging services for high-resolution
panels;
•Source & Gate ICs integrated technology development is used in product applications with narrow border panels;
•Develop new 2P2M RDL structure to use pure Cu RDL for fine pitch complex circuit and Improved Cu RDL undercut
instead of Cu-Ni-Au composite structure;
•Develop Ultra Fine Pitch (UFP) COF assembly and testing technology;
•Implement new thermal conductive resin with higher conductivity for COF package;
•Enhance Pb free ball level capability (temperature cycle > 1000 cycles); and
•High Frequency & Low loss Product Substrate design for FCCSP.
•Develop 2P2M with thick Cu RDL and taller Cu Pillar bump height technology for power management chip product.
•Develop 12 inch stand-alone thinner technology for WLCSP.
•Develop extremely narrow IC width (<0.42mm) of display driver COF packaging technology services.
•Technical services for COF packaging and applying for non-display product.
•DDR5 DRAM assembly technology development.
•Thermal enhanced Flip-chip BGA with Heat sink assembly technology development.
35
For new product and product enhancement work in 2017, our work concentrates on three key development programs: 3D WLCSP,
biometric sensor package solutions, and flip chip technology. In the bumping area, we completed customer qualification of 300mm wafer
Au bumping process in 2012 and started volume production in the fourth quarter of 2012. Development of Cu plating enables the entry of
WLCSP, RDL and flip chip market and Cu RDL applied on DRAM wafer for SiP product is qualified in 2016. Turnkey services of
WLCSP and flip chip QFN have been implemented for mass production in 2013 based on the successful technology developments. In
2012, we also initiated both 200mm and 300mm Cu pillar bumping engineering work and, related packaging technologies are being
developed for mixed-signal and memory products in 2013. It is also qualified on power management IC product in 2016. According
wearable device trend, we miniature fine-pitch Cu RDL process for WLCSP and RDL products, we shrink ball size with ball mount
technology and combine thinner wafer grinded thickness to achieve thin WLCSP structure in 2020 which used in Auto Focus, OIS
(Optical Image Stabilization) system and Hall motor sensor. By integrating WLCSP bumping, copper pillar bumping and flip chip
assembly capability, an integrated WLCSP (CoW or 3D WLCSP) is developing in 2015, and qualified the structure and process
verification in 2016. We adopt FC Chip Scale Package to implement in USB4/DP2.0 Re-Driver, PCIe 5.0 Re-Driver Product in 2021.
Meanwhile, fingerprint sensor (FPS) packaging solution by LGA was also developed for smartphone demand in 2015. More and more
integrated function of DDIC, TDDI and FPS, is requested for smartphone application, therefore 2-metal layers COF solution and COF
SMT are developed to provide the package solution since 2019. Moreover, the improved OLED panel yield rate has also increased its
adoption in smartphones, leading to diverse applications such as in-display fingerprint sensors.
Since 2013, in-process engineering advancement allowed us to extend our wirebond technology to service MEMS products. To
further achieve cost reduction, alloy wire and 0.6 mil Au wirebond processes were also developed. In 2018, we continued to work on the
expansion of multi-chip NAND packages offerings, and 12” fine pitch COF assembly capability. Capability of handling miniature molded
packages has been extended to 1x1 mm size and various improvements will also be made in production equipment to enhance throughput
and efficiency. In 2019, we launched SDBG technology to implement multi-chip assembly and module of flash products for NAND Flash
applications for SSD and eMMC applications.
As of February 28, 2026 we employed 651 employees in our research and development activities. In addition, other management
and operational personnel are also involved in research and development activities but are not separately identified as research and
development professionals.
We maintain laboratory facilities capable for materials and electrical characterizations to support production and new product
development. Computer simulation is used to validate both mechanical and electrical models in comparison to measurement results.
Enhancement of Shadow Moiré and Micro Moiré equipment was carried out to support MCP and flip chip package warpage and residue
stress characterization. We also setup up mold flow simulation capability to predict assembly risk. In Advanced Packaging Lab, rheology
measurement capability and high frequency electric simulation capability were established, aimed at expanding capability for material
selection and inspection to support flip chip introduction and various resin characterizations. For customer application request, we
enhance our thermal simulation capability in 2022. An analytical laboratory has been built out in our bumping line providing timely
support to manufacturing operations.
Quality Control
We believe that our reputation for high quality and reliable services have been an important factor in attracting and retaining leading
international semiconductor companies as customers for our assembly and testing services. We are committed to delivering
semiconductors that meet or exceed our customers’ specifications on time and at a competitive cost. We maintain quality control staff at
each of our facilities.
Our quality control staff typically includes engineers, technicians and other employees who monitor assembly and test processes in
order to ensure high quality. We employ quality control procedures in the following critical areas:
•sales quality assurance: following market trends to anticipate customers’ future needs;
•design quality assurance: when developing new testing and assembly processes;
•supplier quality assurance: consulting with our long-term suppliers;
•manufacturing quality assurance: through a comprehensive monitoring program during mass production; and
•service quality assurance: quickly and effectively responding to customers’ claims after completion of sale.
All of our facilities have obtained ISO 26262 road vehicles-functional safety system certification in December 2019 and obtained
IATF 16949 quality system certification in December 2017. In addition, our facilities in Hsinchu and Tainan have been recertified with
ISO 9001 for substantial revision since 2015.
36
IATF 16949 certification system seeks to integrate quality management standards into the operation of a company and emphasizes
the supervision and measurement of process and performance. An ISO 9001 certification is required by many countries for sales of
industrial products.
In addition to the quality management system, we also earned the 1998 QC Group Award from The Chinese Society of Quality,
which is equivalent to the similar award from the American Society of Quality and certified ISO17025 in 2000. In 2003, ChipMOS passed
SONY Green Partner (Tier 2) certification through its ProMOS channel, and in 2009, ChipMOS obtained SONY Green Partner (Tier 1)
certification due to its direct business relationship with SONY. The Sony certificates will continue to be maintained uninterrupted until
now. Our laboratories have also been awarded Chinese National Laboratory accreditation under the categories of reliability test, electricity
and temperature calibration.
Our assembly and testing operations are carried out in clean rooms where air purity, temperature and humidity are controlled. To
ensure the stability and integrity of our operations, we maintain clean rooms at our facilities that meet U.S. federal 209E class 100, 1,000,
10,000 and 100,000 standards. A class 1,000 clean room means a room containing less than 1,000 particles of contaminants per cubic
foot.
We have established manufacturing quality control systems which are designed to maintain reliability and high production yields at
our facilities. We employ the most advanced equipment for manufacturing quality and reliability control, including:
•Temperature cycling tester (TCT), thermal shock tester (TST) and pressure cook tester (PCT), and highly accelerated
temperature/humidity stress tester (HAST) for reliability analyses;
•Scanning acoustic tomography (SAT) and scanning electronic microscope (SEM) for physical failure analysis;
•Semi-Auto prober, curve tracer and DC tester station for electrical failure analysis;
•Atomic absorption spectrometer (AA), inductively coupled plasma optical emission spectrometer (ICP-OES) and automatic
potentiometric titrator (AP), UV-Visible Spectrophotometer (UV-VIS), Cyclic Voltammetric Stripping (CVS) and Ultra
Performance Liquid Chromatography (UPLC) for chemical analysis
In addition, to enhance our performance and our research and development capabilities, we also installed a series of high-cost
equipment, such as temperature humidity bias testers, low temperature storage-life testers and highly accelerated stress testers. We believe
that many of our competitors do not own this equipment.
As a result of our ongoing focus on quality, in 2025, we achieved monthly assembly yields of an average of 99.92% for our memory
and logic/mixed-signal assembly packages, 99.99% for our COF packages, 99.97% for our COG packages and 99.96% for our bumping
products (including gold bump, RDL and WLCSP). The assembly yield, which is the industry standard for measuring production yield, is
equal to the number of integrated circuit packages that are shipped back to customers divided by the number of individual integrated
circuits that are attached to lead frames or organic substrate.
Raw Materials
Semiconductor testing requires minimal raw materials. Substantially all of the raw materials used in our memory and logic/mixed-
signal semiconductor assembly processes are interconnect materials such as leadframes, organic substrates, gold wire and molding
compound. Raw materials used in the LCD, OLED, automotive panel and other display panel driver semiconductor assembly and testing
process include gold, carrier tape, resin, spacer tape, plastic reel, aluminum bags, and inner and outer boxes. Cost of raw materials
represented 19%, 20% and 25% of our revenue in 2023, 2024 and 2025, respectively.
We do not maintain large inventories of leadframes, organic substrates, gold wire or molding compound, but generally maintain
sufficient stock of each principal raw material for approximately two to three month’s production based on blanket orders and rolling
forecasts of near-term requirements received from customers. Shortages in the supply of materials experienced by the semiconductor
industry have in the past resulted in price adjustments. See “Item 3. Key Information—Risk Factors—Risks Relating to Our Business—If
we are unable to obtain raw materials and other necessary inputs from our suppliers in a timely and cost-effective manner, our production
schedules would be delayed and we may lose customers and growth opportunities and become less profitable” for a discussion of the risks
associated with our raw materials purchasing methods. For example, with the exception of aluminum bags and inner and outer boxes,
which we acquire from local sources, the raw materials used in our COF process and for modules are obtained from a limited number of
Japanese suppliers.
37
Competition
The independent assembly and testing markets are very competitive. Our competitors include large IDMs with in-house testing and
assembly capabilities and other independent semiconductor assembly and testing companies, especially those offering vertically
integrated assembly and testing services, such as Advanced Semiconductor Engineering Inc., Amkor Technology, Inc., Chipbond
Technology Corporation, King Yuan Electronics Co., Ltd., Powertech Technology Inc., Jiangsu Changjiang Electronics Technology Co.,
Ltd. and United Test and Assembly Center Ltd. We believe that the principal measures of competitiveness in the independent
semiconductor testing industry are:
•engineering capability of software development;
•quality of service;
•flexibility;
•capacity;
•production cycle time; and
•price.
In assembly services, we compete primarily on the basis of:
•production yield;
•production cycle time;
•process technology, including our COF technology for LCD, OLED, automotive panel and other display panel driver
semiconductor assembly services;
•quality of service;
•capacity;
•location; and
•price.
IDMs that use our services continually evaluate our performance against their own in-house assembly and testing capabilities.
These IDMs may have access to more advanced technologies and greater financial and other resources than we do. We believe, however,
that we can offer greater efficiency and lower costs while maintaining an equivalent or higher level of quality for three reasons:
•firstly, we offer a broader and more complex range of services as compared to the IDMs, which tend to focus their resources
on improving their front-end operations;
•secondly, we generally have lower unit costs because of our higher utilization rates and thus enabling us to operate at a more
cost-effective structure compared to the IDMs; and
•finally, we offer a wider range of services in terms of complexity and technology.
Intellectual Property
As of February 28, 2026, we held 273 patents in Taiwan, 76 patents in the United States, 149 patents in Mainland China, 1 patent in
the United Kingdom and 2 patents in Korea and Japan, respectively, relating to various semiconductor assembly and testing technologies.
These patents will expire at various dates through to 2044. As of February 28, 2026, we also had a total of 11 pending patent applications
in Taiwan, and 68 in Mainland China. In addition, we have registered “ChipMOS” and its logo as trademarks in Taiwan, the United
States, Mainland China, Singapore, Hong Kong, Korea, Japan, the United Kingdom and the European Community.
We expect to continue to file patent applications where appropriate to protect our proprietary technologies. We may need to enforce
our patents or other intellectual property rights or to defend ourselves against claimed infringement of the rights of others through
litigation, which could result in substantial costs and a diversion of our resources. See “Item 3. Key Information—Risk Factors—Risks
Relating to Our Business—Disputes over intellectual property rights could be costly, deprive us of technologies necessary for us to stay
competitive, render us unable to provide some of our services and reduce our opportunities to generate revenue”.
38
Government Regulations
As discussed above under “—Intellectual Property”, governmental regulation of our intellectual property may materially affect our
business. The failure to protect our property rights would deprive us of our ability to stay competitive in the semiconductor industry. Our
intellectual property rights are protected by the relevant patent and intellectual property agencies of the European Community, the United
Kingdom, the United States, Mainland China, Korea, Japan and Taiwan.
Environmental and Climate Change Matters
Semiconductor testing does not generate significant pollutants. The semiconductor assembly and gold bumping process generate
stationary acid, alkali and VOC pollutions, principally at the plating and etching stages. Water waste is produced when silicon wafers are
ground thinner, diced into chips with the aid of diamond saws and cleaned with running water. In addition, excess materials, either on
leadframes or molding process, are removed from assembled semiconductors in the trimming and de-junking processes, respectively. We
have various treatment equipment for wastewater and air pollutants at our assembly and bumping facilities. Since 2001, we have adopted
certain environmental friendly production management systems, and have implemented certain measures intended to bring our all
processes in compliance with the Restriction of Hazardous Substances Directive/EC issued by the European Union and our customers. We
believe that we have adequate and effective environmental protection measures that are consistent with semiconductor industry practices
in Taiwan. In addition, we believe we are in compliance in all material respects with current environmental laws and regulations
applicable to our operations and facilities.
All of our facilities in Taiwan have been certified as meeting the ISO 14001 environmental standards of the International
Organization for Standardization, and all of our facilities in Taiwan have been certified as meeting the ISO 45001 standards of the
International Organization for Standardization. Our facilities at Hsinchu Science Park, Chupei, Hukou, Hsinchu Industrial Park and
Southern Taiwan Science Park have won numerous awards including “Green Factory Label” from 2013 to 2025, “Enterprises
Environmental Protection Gold Grade Award” in 2018 and 2019, “Occupational Safety and Health Excellent Award” in 2016, 2017, 2021
to 2025, “Green Building Label” in 2014 and 2017 up to now. We are also certified the “Health Promotion Awards” from 2012 to 2025.
We continue to encourage our employees to participate in community environmental campaigns and better environmental friendly
practices.
We will continue to enhance related management to reduce industrial waste, save energy and control pollution. For products in
conformity with Green Product Requirement, the Company obtained Green Partner certification from Sony Corporation of Japan.
Furthermore, we passed QC 080000 certification and “Greenhouse Gas Verification Statement” (“ISO 14064-1”) from 2013 until now.
We further confirmed many products’ CFP “Carbon Footprint Verification Statement” (“ISO 14067”) and WFN “Water Footprint
Verification Statement” (“ISO 14046”). At the same time, Tainan, Hsinchu, Chupei and Hukou plants passed the certification of energy
management system (“ISO 50001”) in 2014, 2017 and 2025 up to now. For materials management, we passed the “Material Flow Cost
Accounting (MFCA, ISO 14051)” to reduce the loss. Our policy is to pay attention to the environment issues by standardizing on green,
environmental friendly products, cleaner process and enhance supplier chain management to meet ChipMOS’ Corporate Social
Responsibilities.
As an enterprise, ChipMOS understands the importance of carrying out environmental protection in action. By referencing the Task
Force on Climate-related Financial Disclosures (“TCFD”) framework developed by the Financial Stability Board (“FSB”) and began in
2021, we have identified the management needed over risks and opportunities associated with climate change, and further attained a
comprehensive overview on the effects of climate change.
Besides depleting the Earth of her resources, energy consumption also generates carbon dioxide, leading to greenhouse effects.
Hence, effective energy use will help to mitigate impacts on the environment. Due to the nature of the technology industry, ChipMOS is
classified as one of the major electricity consumers per regulations from the Energy Administration, MOEA. Upholding our principle of
treasuring energy consumption, we began to systematically initiate energy conservation actions in 2012. We continue to introduce various
energy efficient technologies and facilities, and on top of Tainan fab’s voluntary introduction of ISO 50001 Energy Management System
in 2014, Hsinchu fab, Chupei and Hukou plants also achieved the ISO 50001 Energy Management System certification in 2017 and 2025.
We actively promoted the use of renewable energy sources in 2020 and built solar power generation facilities to continuously increase the
consumption ratio of renewable energies.
Environmental, Social and Governance (“ESG”) Initiatives and Sustainable Development Goals (“SDGs”) Linkings
ChipMOS adheres to the mission of “Acting with Integrity, Strengthening Environmental Protection, and Care for the
Disadvantaged” and has formulated the “Sustainable Development Principles” and “Corporate Sustainability Policy”, which are adopted
by the Board of Directors as the highest principle for the Company to promote sustainable development.
39
ChipMOS ESG Committee is the highest decision-making sustainability management organization within the Company. The
Chairman & President acted as the Chairperson and be the top of management executives of ESG Committee, the Executive Vice
Presidents holds the highest management position for the south and north fabs; the key members are senior executives of each business
unit, who work together to set sustainable development goals in line with the Company’s business strategy and implement sustainability
plans in daily operations. The ESG Committee reports quarterly to the Board of Directors on the status and results of sustainability
projects, including issues such as promotion of net-zero emission for sustainability (including GHG inventories and verification), annual
sustainability results (including stakeholder communication), mid- and long-term ESG goals, and results of risk management.
ChipMOS formulates sustainability vision by integrating sustainability policy, organizational vision, and core missions, and
inspects the vision’s link to the United Nations’ SDGs. In accordance with the Company’s ESG development direction and ChipMOS
Material Topics, ChipMOS focuses on 10 major SDGs (SDG 3, SDG 4, SDG 6, SDG 7, SDG 8, SDG 11, SDG 12, SDG 13, SDG 16,
SDG 17) to respond and set measurable and timely internal management objectives.
We have launched sustainable actions for all aspects during our business management, including: continuing to enhance corporate
governance, complying with ethical management and being committed to the R&D and innovation of core technologies to realize our
commitment and responsibilities to employees; and actively invest in green production to reduce harmful effects on the environment
during production processes and continuing to enhance resource utilization efficiency to protect the environment. Internally, we persist in
the protection and care for employees’ health and welfare while striving in employee development and assisting in their career
development. Externally, we are deeply engaged in environmental sustainability and social welfare.
Green Production and Green Manufacturing
Global warming and climate change have become phenomenon that enterprises around the world need to address. ChipMOS
continues to follow the Paris Agreement and strives to increase the use of renewable energy and improve the efficiency of energy use on
the basis of strengthening adaptation to climate change, so as to reducing greenhouse gases and controlling global temperature rise, on top
of enhancing adaptability to climate change. ChipMOS is committed to building solar power generation system up to 10% of the
contracted power generation in 2025, planning various energy saving goals and achieve a company-wide energy saving rate more than
1%, and implementing products’ Carbon and Water Footprint and Material Flow Cost Accounting and more. Through reducing
consumption and carbon emissions, we hope to reduce the impacts on the environment. At the same time, we also continue to educate
employees to enhance their awareness of environmental protection. These efforts have also been extended to our suppliers and
stakeholders as we hope to work collectively to become a low-carbon, energy-saving, and green enterprise.
Employee Value and Talent Developing
We are committed to equality and strive to provide equal employment opportunities. We protect the rights of our workers and
respect every employee, and we have created a positive and friendly workplace environment. ChipMOS has set up comprehensive talent
development framework and system and invested sufficient resources toward the training for Leadership, Technology, General
Management, Quality, and for Newcomer Orientation. At the same time, talent development strategies have also been formulated to
achieve talent development goals.
Long-Term Customer Partnerships
ChipMOS promises that products and services delivered to customers can meet their needs, are competitive, and are served on a
timely basis. Upholding the principle of customer service, we provide comprehensive products and services from a customer oriented
perspective with the aim of becoming customers’ trusted, long-term partners.
Social Inclusion and Local Community Partnership
With the two major visions, namely “Environmental Sustainability” and “Public Welfare Practice”, ChipMOS has developed four
major development aspects, including “Environment-Friendly”, “Community Feedback”, “Care for the disadvantaged” and “Talent
Cultivation”, linking the 17 UN SDGs, while focusing on three SDGs (SDG 3, SDG 4 and SDG 11).
Environmental Sustainability
Various plans are conducted based on the two major aspects, “environmental friendliness” and “community feedback”. For the
implementation strategy, we start from the Company internally and work with the community. Other than taking care of the surrounding
environment, we also work together with our employees to love the Earth with diverse approaches. It is expected to take practical actions
for fighting against climate change and global warming together.
40
Fulfillment of public welfare
ChipMOS insists to the philosophy of “taking from the society and using it for the society”, by connecting various internal and
external resources, the prioritized focus are “cares for the disadvantaged” and “cultivation of young talents” for the public welfare
practice, with active collaborations with local communities, schools and social welfare organizations. It is hoped to exert the full forces as
a corporate, and invite ChipMOS employees to jointly support the public welfare activities, and extend the influence of public welfare to
all corners of Taiwanese society through more diverse methods, for achieving common prosperity of the society, and implementing the
spirit of corporate social citizen.
Corporate Governance
ChipMOS follows the “Articles of Incorporation” and “Corporate Governance Best Practice Principles” and relevant laws and
regulations, formulates the Corporate Governance structure, establishes a good Corporate Governance system, abides by laws and
regulations, and operates in good faith to ensure the steady operation and growth of the Company. ChipMOS strengthens the supervision
and management of the Company’s operation through the Board of Directors, strives to protect the rights and interests of shareholders and
other stakeholders, actively communicates and interacts with stakeholders, continuously improves information transparency and
implements sustainable corporate development, which are the main priorities for development promoted by Corporate Governance.
ChipMOS continues strengthening Corporate Governance management, including safeguarding shareholders’ rights and interests,
enhancing the operation of the Board of Directors, strengthening internal control Risk management, improving information transparency,
and implementing sustainable development, so as to actively improve the level of Corporate Governance and allow stakeholders to
understand the effectiveness of the implementation of various policies.