1 | P a g e HANA Microelectronics Public Co., Ltd. 65/98 Soi Vibhavadi-Rangsit 64, Junction 2, Kwang Talad Bangkhen, Khet Laksi, Bangkok 10210 Tel: 66 (0) 2-5511297-8 Fax: 66 (0) 2-5511299 MINUTES OF 2026 ANNUAL GENERAL MEETING OF SHAREHOLDERS Held…
1 | P a g e
HANA Microelectronics Public Co., Ltd.
65/98 Soi Vibhavadi-Rangsit 64, Junction 2, Kwang Talad Bangkhen, Khet Laksi, Bangkok 10210
Tel: 66 (0) 2-5511297-8 Fax: 66 (0) 2-5511299
MINUTES OF 2026 ANNUAL GENERAL MEETING OF SHAREHOLDERS
Held at the Company’s Headquarters
65/98 Soi Vibhavadi-Rangsit 64, Junction 2, Kwang Talad Bangkhen, Khet Laksi, Bangkok
On 30 April 2026
14.00 hrs. - 16.08 hrs.
Directors and executives presented:
-
Mr. John Thompson
-
Mr. Richard David Han
-
Mr. Terrence Philip Weir
-
Mr. Sanjay Nirendra Mitra
-
Mr. Insuk Kim
-
Ms. Pornphan Abhamongkol
-
Mrs. Sunun Thongbai
Independent Director, Chairman of the Board of
Directors, Chairman of the Audit Committee, and Proxy
of Shareholders
Executive Director, President and Chief Executive
Officer, and the Nomination Committee
Executive Director, Executive Vice President and Chief
Financial Officer, the Corporate Governance and
Sustainability Committee, and Chairman of the Risk
Management Committee
Executive Director, Executive Vice President and Chief
Operating Officer for Semiconductor, and Chief
Marketing Officer
Executive Director, Executive Vice President and Chief
Operating Officer for Microelectronics, and Chief
Technical Officer
Independent Director, the Audit Committee, Chairman
of the Nomination Committee, the Corporate
Governance and Sustainability Committee, the Risk
Management Committee, and Proxy of Shareholders
Independent Director, the Audit Committee, the
Nomination Committee, the Corporate Governance and
Sustainability Committee, the Risk Management
Committee, and Proxy of Shareholders
2 | P a g e
- Mr. Stephanus Josephus
Hendrikus Brader
Independent Director, the Audit Committee, the
Nomination Committee, Chairman of the Corporate
Governance and Sustainability Committee, the Risk
Management Committee, and Proxy of Shareholders
External auditor:
- Mrs. Sarinda Hirunprasurtwutti
Partner, EY Office Limited
Assistant to the Chairman and translator:
- Mrs. Tappawong Na Tarlang,
Corporate HR Senior Director
Independent inspector:
- Mr. Somchai Aiemrod, A lawyer license no. 972/2539 who acted as an
independent inspector to verify the vote count and
oversee that the meeting was held transparently and
pursuant to the applicable regulations and the
Company’s articles of association.
Preliminary Proceedings:
The Annual General Meeting was opened by Mr. John Thompson, the Chairman of the Board of
Directors and the Chairman of the Meeting. The Chairman introduced the directors and
executives, sub-committees presented in the Meeting including the representatives from the
Company’s external auditor and the Meeting inspector, totally 11 persons. The Chairman also
informed that the Board of Directors had 8 directors and the meeting attendance rate was 100%.
The Chairman of each subcommittee attended the Meeting. The subcommittees consisted of the
Audit Committee, the Nomination Committee, the Corporate Governance and Sustainability
Committee, and the Risk Management Committee (no any other subcommittee of the Board). All
directors, executives and external auditors were welcome for shareholders’ questions and ready
to provide responding to inquiry and any clarification to the Meeting.
Quorum Announcement:
There were shareholders attending the meeting in person 57 shareholders holding 3,984,589 shares
and 282 proxies holding 438,250,491 shares. Those total 339 shareholders holding 442,235,080
shares are equivalent to 49.95% of 885,366,660 voting shares, which is more than one-third (1/3)
of voting shares. Therefore, a quorum was constituted in accordance with the Company’s Articles
of Association.
Before starting the agenda, the assistant to the Chairman was appointed to inform the Meeting for
information relevant to the meeting, the vote method, the vote counting system, and the method
for making an inquiry and proposing a suggestion as follows:
3 | P a g e
Information Relevant to the Meeting:
To be in line with the good corporate governance, the Company granted the right to shareholders
to propose matters they deemed important to be included in the meeting agenda of the 2025
Annual General Meeting of Shareholders and to nominate individuals whose qualification would
be appropriate to be elected as directors, during the period from 1 October - 31 December 2025.
Nonetheless, no shareholders submitted any proposed agenda items, nor did they nominate any
candidates for directorship positions, or no questions sent in advance.
The Company made a video recording of the Meeting for reference and verification purposes. The
minutes will be published via the Stock Exchange of Thailand and the Company’s own website
within 14 days from the meeting date. Shareholders who wish to provide any suggestions or
comments can submit them to the Company Secretary within 14 days following the publication
of the meeting minutes.
Vote Method:
• Each shareholder has one vote for each share.
• To cast a vote for each agenda, shareholders who attend the meeting in person who would like
to vote disagree or abstain are required to complete the voting cards being given. Shareholders
are to hand over the voting cards for the disagreed and abstained votes to the Company’s
representative for counting the votes. Except for the agenda regarding the appointment of
directors, the voting card will be collected from every shareholder. Shareholders who do not
submit the voting card will be assumed to approve the agenda as proposed by the Company,
and the votes will be counted according to the number of shares they hold.
• Except for custodians, shareholders must vote with all of their shareholding registered at the
meeting for each agenda to approve, disapprove or abstain as they cannot split the votes.
• The vote is invalid if the proxy holders do not vote according to the voting intention made by
shareholders, shareholders or proxy holders fill the voting cards/proxy form in a manner that
makes the voter’s decision unclear, no marking (blank), more than one box marked, no
signature when make any change, or there are spilt votes (except for the case of custodian).
Vote Counting System:
• The objection or abstention shall be deducted from the agreed votes concerning each agenda.
• Counting the votes at a meeting in person from the voting cards and proxy forms, including
those proxies sent in advance which have been counted with the total votes.
• The resolution of all proposed agendas shall be passed when receiving the following votes of
the eligible shareholders present at the meeting including proxies.
Agenda items Passing vote
- To acknowledge the Minutes of 2025 AGM -
- To acknowledge the Company’s operation results for the year 2205 -
- To approve the financial statements for the fiscal year ended 31
December 2025
A majority vote
4 | P a g e
- To approve the dividend payment for the year 2025 A majority vote
- To approve the re-appointment of directors retiring by rotation A majority vote
- To approve the directors’ remuneration for the year 2026 A majority vote
- To approve the appointment of the Company’s auditors for the year
2026 and to fix their remuneration
A majority vote
• In case of a tie vote, the Chairman shall be entitled to a casting vote.
• The barcode system is used in the registration and vote-counting processes for transparent,
accurate and fast results as previous years.
Method for Making Inquiry and Proposing Suggestion:
The method for making an inquiry and proposing a suggestion was informed that following the
information provided of each agenda item, and prior to voting, the Company will provide an
opportunity for shareholders to raise questions relevant to such agenda and also at the end of the
meeting for additional inquiry/suggestion whereby shareholders or proxies are required to inform
their name, surname and specify their status as a shareholder or a proxy.
The Chairman then called the meeting to order and announced that the meeting was held pursuant
to the prior written Meeting Notice given to shareholders in advance as follows.
Agenda 1: To acknowledge the Minutes of the Annual General Meeting of Shareholders
Year 2025 that was held on 30 April 2025
The Chairman proposed the Meeting to acknowledge the Minutes of the Annual
General Meeting of Shareholders Year 2025 that was held on 30 April 2025. The
Minutes were published on the Company’s website since 14 May 2025 and duly
submitted through the Stock Exchange of Thailand to inform shareholders of their
availability and to invite feedback by 30 May 2025. As no shareholders raised any
objections or proposed amendments within the specified period, the Company
deems the Minutes to have been accurately and completely recorded.
The Chairman opened for questions or comments. As there was no question from
shareholders, the Chairman stated that this agenda item was for acknowledgment
and did not require a vote.
Resolution: The Meeting acknowledged the Minutes of the Annual General Meeting of
Shareholders Year 2025 that was held on 30 April 2025.
Agenda 2: To acknowledge the Company’s operation results for the year 2025
The Company’s operation results for the year 2025 are presented in the e-One
Report, which was made available to shareholders for their review prior to the
meeting.
5 | P a g e
The Chairman invited Mr. Richard David Han to report the operation results of the
Company for the year 2025 including Management Discussion and Analysis
(MD&A). Mr. Richard presented the Meeting as follows.
2025 was a year defined by cyclical weakness in semiconductors, structural
oversupply in China, currency pressure, and geopolitical trade friction. Despite
these headwinds, the Group preserved profitability, strengthened liquidity, and
took decisive restructuring actions to position the business for recovery.
Key Financial Performance (2025 vs. 2024)
• Revenue: THB 20,564m (–17%)
• Normalized Earnings (incl. Other Income): THB 804m (–33%)
• EBITDA (incl. FX gain/loss): THB 2,228m (–29%)
• Net Earnings after Tax: THB 670m (+206%)
• Cash & Financial Investments: THB 11.9B (+17%)
• Proposed Gross Dividend: THB 1.00/share (+33%, subject to shareholder
approval)
While operating performance declined in line with market conditions, reported net
profit improved significantly due to the absence of the THB 1.84B impairment
recorded at PMS in 2024.
Revenue & Operational Analysis
EMS Operations
EMS demand remained relatively stable in automotive and industrial segments,
with growth in RF-related sectors. Mobile and consumer markets were flat, and
medical demand remained soft.
China EMS revenues declined due to elevated U.S. tariffs, necessitating the
transfer of selected production lines to Lamphun and Cambodia. Management
implemented restructuring measures to preserve divisional profitability despite
lower topline contribution.
A shift to a consignment model for a major EMS customer also reduced reported
revenue without materially affecting profitability.
OSAT Operations
2025 was a particularly difficult year for OSAT.
In Ayutthaya, utilization fell progressively throughout the year, reaching a historic
low of 43%. Combined with a strong Thai baht, this led to an operating loss for the
division.
In Jiaxing, aggressive local competition drove pricing to unsustainable levels.
Management withdrew selected low-margin product lines to mitigate further
losses. Encouragingly, EV modules and power management devices showed
stronger demand, and together with cost restructuring, the China OSAT business
returned to profitability by year-end.
6 | P a g e
Regional Highlights
China (Jiaxing)
A weak domestic economy, tariff pressure, and intense competition created
significant challenges. Strategic repositioning and aggressive cost restructuring
mitigated the impact. Growth in RFID, EV modules, and power devices provides
a stronger base for 2026.
USA (Ohio – HTI)
HTI experienced a challenging year, particularly in Q4. Inlay volumes increased
more than 50% year-on-year; however, aggressive pricing pressure compressed
margins. The tyre-tag business declined sharply due to weakness in EU markets.
An M&A initiative was pursued but ultimately aborted, resulting in exceptional
costs and a year-end divisional loss.
Cambodia
Operations benefited from production transfers from China and additional new
accounts. Strong productivity and cost discipline significantly improved
profitability, despite border closures and a temporary year-end shutdown due to
security concerns.
Korea (PMS)
The SiC fab continued to incur substantial operating losses. However, several
structural improvements were achieved:
• Qualified a Chinese foundry partner for silicon production
• Initiated engagement with a Chinese SiC foundry
• Secured a Korean foundry agreement to increase 2026 silicon utilization
• Expanded marketing in India, Taiwan, Turkey, and Korea
• Launched new SiC products targeting the consumer segment
While traditional SiC segments (EV, industrial, renewables) remained weak, the
new product portfolio shows encouraging potential for 2026 and beyond.
Profitability Analysis
Operating Profit declined 33%, primarily due to:
• Losses at PMS
• Operating losses at Ayutthaya OSAT
• Strength of the Thai baht impacting margins
EMS performance remained comparatively stable.
Net Profit increased 206% year-on-year due to the absence of the THB 1.84B
impairment recorded in 2024.
7 | P a g e
Revenue declined 17% due to:
• Weak semiconductor demand (OSAT & PMS)
• RFID softness in the U.S.
• Consignment model changes in EMS
Cash Reserves & Liquidity
Despite a 29% decline in EBITDA, cash reserves increased 17% to THB 11.9B.
This improvement was driven by disciplined capital management:
- Capex reduction: 61% decrease (THB 0.64B in 2025 vs. THB 1.66B in 2024)
- Inventory reduction: THB 1.29B reduction at year-end 2025 versus 2024
The Group exits 2025 with a strong liquidity position, providing flexibility to
support recovery investments and manage continued volatility.
2026 Business Outlook
OSAT
Demand in Ayutthaya is beginning to improve, with positive momentum expected
by mid-2026. Geopolitical realignment between China and Japan may create
incremental opportunities for Thai operations.
China remains challenged by local oversupply, though specialist lines (EV
modules, power devices) are expected to support growth.
EMS
Lamphun’s outlook is improving with several new projects commencing in 2026.
Entry into the AI supply chain through solid-state cooling devices for GPU
producers and hyperscalers is expected to support growth.
China EMS remains constrained by tariffs, but RFID expansion will partially offset
this limitation.
RFID
Following a difficult 2025, we project meaningful recovery in the second half of
2026 for inlays and a rebound in tyre-tag demand. Strengthened marketing teams
in both the U.S. and China have improved order intake. Capacity expansion is
planned by early Q3 2026.
PMS
Early indicators suggest the China downcycle in Si and SiC may have bottomed.
New consumer-focused products and expanded marketing efforts show promise.
Losses are expected to continue in H1 2026, with improvement projected in H2
8 | P a g e
2026 Business Environment
• The Thai baht appreciated approximately 7% in 2025, pressuring margins.
While policy changes in the U.S. and Thailand may influence FX movements,
a significant reversal of Thai baht strength is not currently anticipated despite
the unexpected BOT rate cut of 0.25%. That said, the recent US/Iranian conflict
has strengthened the US$ due to increased oil prices – it remains to be seen to
what extent and for how long this conflict will endure and the impact on the
US$ strength.
• U.S. tariffs have stabilized at 19–20% for Thailand and Cambodia, broadly
aligned with ASEAN peers. But recent US supreme court rulings have again
increased tariff uncertainty going forward.
• The Thai–Cambodian border situation continues to create logistical
inefficiencies but remains manageable as long as no further escalation
develops.
• Geopolitical volatility remains both a risk and a potential source of opportunity
through supply chain realignment.
• Should the middle-east conflict endure for over six months, there are concerns
of increased global inflation or even stagflation which will impact all
consumers and industries.
Strategic Focus for 2026
- Reduce operating losses at PMS and accelerate structural cost improvements.
- Continue development of differentiated technologies and higher value-added
products.
- Evaluate disciplined M&A opportunities aligned with long-term shareholder
value creation.
- Accelerate automation and digitalization across manufacturing and IT systems.
- Maintain a strong balance sheet to navigate volatility and capitalize on strategic
opportunities.
2025 required decisive action and disciplined capital management. While
challenges persist, the Group enters 2026 with strengthened liquidity, improved
cost structures, and clearer strategic positioning for the next cycle.
The Chairman further reported the Company’s anti-corruption policy and status to
the meeting as follows.
Hana Anti-Corruption Policy and Status
The Board of Directors realizes the importance of the anti-corruption. Hana has a
zero tolerance of bribery and corruption. The Company prohibits the Board of
Directors, management, employees or third parties in their relationship with the
Company, being involved in any act of corruption in any form in all business
transactions to benefit directly or indirectly and comply with the applicable laws
and regulations in all the countries in which the Company operates.
9 | P a g e
The Company has been certified as a member of Thai Private Sector Collective
Action against Corruption since 2015 until present.
The Chairman opened for questions or comments. There were questions from
shareholders as follows.
Mr. Hin Nawawong (A shareholder): What policies does the Company have for
conducting business related to AI?
Mr. Richard David Han (CEO): Hana recently signed an agreement to
manufacture AI solid-state cooling products, essential for managing heat in high-
speed GPUs and high-bandwidth memory operating at high speeds. With new
silicon solutions, such as next-gen GPUs with 1.6TB speed, heat generation is
increasing. Our customer has developed a device to support such cooling of high-
temperature semiconductors.
We are building an automated, in-house production line to manufacture these
cooling devices for the data center supply chain. We expect our first production
line to be qualified by the end of June 2026, followed by a ramp-up in the second
half of next year.
Demand significantly exceeds our current supply capacity, and we plan to scale
production once qualification is achieved. We expect demand to rise in the second
half of this year and continue growing into next year. The customer is also
developing next-gen cooling devices, which could further drive demand if
successful, particularly with GPU integration.
Overall, we are proceeding cautiously and are very excited about the growth
potential of this business.
Mr. Hin Nawawong (A shareholder): Over the past one to two years, media
reports indicate that Thailand is planning multiple load centers to support
increasing and more complex electricity demand. In this context, are you referring
to cooling solutions within these load centers? If so, this would be well aligned
with both national policy directions and global trends.
Mr. Richard David Han (CEO): The end-use deployment of AI solid-state
cooling products is still under consideration. However, if adopted by major silicon
suppliers and data center operators, we expect them to be deployed globally in
relevant markets.
Mr. Nirun Jitpakob (A shareholder): Considering the conflicts over the past two
months, is there an expectation that raw material and equipment costs may trend
upward?
Mr. Richard David Han (CEO): The US–Israel–Iran conflict is expected to raise
energy prices, particularly oil and natural gas, which will affect various
commodities and supply chains in the electronics industry. We’ve managed this by
building inventory in advance and negotiating with customers to pass through cost
increases.
10 | P a g e
If energy prices rise by 15%, we estimate an additional cost of baht 250 million for
Hana Group. However, a stronger US dollar could generate an FX benefit of
around baht 1,250 million, potentially offsetting energy cost increases. The key
concern is that prolonged conflict could weigh on global growth, and no company
would be fully insulated. This underscores the importance of maintaining a strong
balance sheet amid uncertainty.
Mr. Chayantorn Pladikanon (A shareholder): Could you please advise when
production of the AI solid-state cooling products is expected to commence and
what the anticipated gross margin for this product would be?
Mr. Richard David Han (CEO): In terms of potential, this business could become
one of Hana’s top 10, or even top 7 customers by the end of next year. The expected
average margin is broadly in line with Hana’s current overall margin. However,
we do not yet have precise figures, as we are still developing the production line.
Actual results will depend on production ramp-up, yield performance, and overall
operational efficiency.
Mr. Chairat Paladikanon (A shareholder): Could you please clarify what
proportion of the overall data center cooling system is represented by the
components that Hana manufactures for this customer? Furthermore, once full
production capacity is achieved, what is the Company’s estimated peak revenue
potential?
Mr. Richard David Han (CEO): This customer has been a long-time partner,
initially using their technology for cooling perishable goods in transport trucks.
With the rise of AI, they’ve expanded into semiconductor cooling, although it
remains a new area for them.
We are currently their second supplier but believe our automated production
system could make us the primary supplier over time. Mass production is targeted
for early Q3 (July) in 2026, followed by an accelerated ramp-up.
The customer estimates the total addressable market for AI solid-state cooling
products could reach USD 25 billion, with several competitors. However, we see
significant opportunities for all players and are focused on scaling production
efficiently to achieve cost competitiveness and expand market share for both Hana
and the customer.
As there was no further question from shareholders, the Chairman then announced
that the Meeting acknowledged the operation results of the Company for the year
2025.
Agenda 3: To approve the financial statements for the fiscal year ended 31 December
2025
The Chairman proposed the meeting to approve the financial statements for the
fiscal year ended 31 December 2025 and the auditor’s report, all of which have
been reviewed by the Audit Committee.
11 | P a g e
The Chairman opened for questions or comments. There was a question from a
shareholder as follows.
Mr. Nirun Jitpakob (A shareholder): Could you please provide details on the
baht 144.1 million of non-current liabilities, and whether these liabilities are
expected to remain outstanding over the long term?
Mr. Terrence Philip Weir (CFO): Those non-current liabilities concern
government incentives to our China subsidiary for equipment and will be
transferred to income statement according to each incentive program.
As there was no further question from shareholders, the Chairman proposed the
Meeting to vote on this agenda item.
Vote result: The result of the vote count was as follows.
Resolution: The Meeting approved the financial statements for the fiscal year ended 31
December 2025.
Agenda 4: To approve the dividend payment for the year 2025
Considering the Company’s operating performance for the year 2025, the Board
of Directors recommends the payment of the final dividend for the financial year
ended 31 December 2025 at the rate of baht 0.75 per share, with the Record Date
on 17 March 2026 and the dividend payment date on 19 May 2026.
The Company previously paid an interim dividend for the first nine-month
operating results of 2025 at the rate of baht 0.25 per share on 12 December 2025.
Therefore, the total dividend payment for the financial year ended 31 December
2025 will be baht 1.00 per share, or approximately baht 885 million.
The Chairman opened for questions or comments. There were questions from
shareholders as follows.
Mr. Phuvit Paladikanon (A shareholder): Why would the Company adjust its
dividend policy so that the payout ratio can exceed 100%?
Mr. Richard David Han (CEO): Our dividend policy has historically ranged
from 30% to 100% of profits. Despite relatively low profits last year, we increased
our cash position by 17% year-on-year through prudent cash management, cost
control, and inventory conversion.
Given this stronger cash position, the Board declared a dividend of one baht per
share, not strictly based on profit percentage, but on what the Company can
reasonably distribute.
Approve
Disapprove
Abstain
Invalid
442,050,080 Votes;
0 Votes;
185,000 Votes;
0 Votes;
99.9582 %
0 %
0.0418 %
0 %
12 | P a g e
We’ve revised our policy to a minimum payout of 30% of consolidated net profit
after tax and statutory reserves. Actual dividends will depend on operating results,
cash flow, and other factors. The payout ratio may be lower than 30% or exceed
100% when appropriate, giving the Board greater flexibility in setting dividends.
This revision better reflects the Company’s financial position and provides a more
adaptable dividend policy for shareholders.
Mr. Chairat Paladikanon (A shareholder): If the Company maintains strong
cash reserves, is it able to pay higher dividends?
Mr. Richard David Han (CEO): The key question is how to use our cash,
whether to reinvest it for future growth or distribute it as dividends. We aim to
maintain a careful balance between these priorities.
We also need to consider ongoing uncertainties. If global conflicts persist and
economic conditions weaken, businesses may face prolonged challenges. In such
an environment, maintaining sufficient cash reserves is essential to ensure long-
term resilience.
Therefore, the Board’s decision reflects a balance between an appropriate dividend
payout, retaining earnings for future growth, and preserving financial strength.
This approach ensures Hana can continue operating and remain stable even in
challenging conditions.
Mr. Chairat Paladikanon (A shareholder): In my view, the major reduction in
Capex is not favorable for the Company’s long-term future.
Mr. Richard David Han (CEO): Last year, we spent approximately baht 640
million on capital expenditure, which was relatively low. This year, we are
planning investments of around baht 1.85 billion, nearly three times higher, along
with dividends of approximately baht 885 million. Overall, we continue to
maintain a healthy liquidity position.
However, if the new AI solid-state cooling products reach their targeted scale, we
will need to substantially increase our investment. While this is positive for growth,
it also requires ensuring sufficient capital to support the expansion.
Mr. Chairat Paladikanon (A shareholder): Could you provide an update on the
progress of the joint venture in the FT1 project?
Mr. Richard David Han (CEO): Any formal updates or definitive statements
regarding the FT1 project should come from the majority shareholder in the joint
venture. From our perspective as the minority shareholder, the FT1 project is
currently on hold. While the silicon carbide market, including within our PMS, has
shown some improvement, overall conditions remain challenging. Given this
environment, we have agreed to pause the project for now, and no decision has
been made to move forward at this stage.
13 | P a g e
As there was no further question from shareholders, the Chairman proposed the
Meeting to vote on this agenda item.
Vote result: The result of the vote count was as follows.
Resolution: The Meeting acknowledged the interim payment at the rate of baht 0.25 per share
that was paid on 12 December 2025 and approved the annual dividend payment
for the year 2025 at the rate of baht 0.75 per share to be paid on 19 May 2026.
The dividend of baht 0.75 per share is paid from the net profit and retained earnings
as at 31 December 2025 from BOI promoted businesses which has the tax
exemption, so the final dividend paid is baht 0.75 per share net.
The total 2025 dividend will be baht 1.00 per share net which is composed of
interim dividend baht 0.25 per share paid on 12 December 2025 and the final
dividend baht 0.75 per share gross to be paid on 19 May 2026.
Agenda 5: To approve the re-appointment of directors retiring by rotation
The Chairman informed the Meeting that Mr. Richard David Han, Mrs. Sunun
Thongbai and Mr. Stephanus Josephus Hendrikus Brader were the interested
directors subject to re-appointment this year, so they therefore expressed their
intention to leave the meeting room.
The Chairman informed the Meeting that one-third of the directors, who have
served the longest term, must retire by rotation at every Annual General Meeting
according to the Company’s Articles of Association. The Company invited
shareholders to propose candidates to be elected as directors from October -
December 2025 and there were no proposals given. Therefore, the Chairman
proposed the Meeting to consider the directors whose tenure has ended. This year,
directors whose tenure has ended are:
- Mr. Richard David Han to be re-appointed as an executive director
- Mrs. Sunun Thongbai to be re-appointed as an independent director
- Mr. Stephanus Josephus Hendrikus Brader to be re-appointed as an
independent director
The Chairman further advised that those three directors were proposed by the
Nomination Committee to be re-elected due to the satisfaction with their
performance, effectiveness and commitment to the roles. All of them have
qualifications suitable to the Company’s business and have qualifications as
prescribed by relevant laws and regulations whereas the independent director can
provide opinions independently. The brief profile of those directors had been
distributed to shareholders for consideration.
Approve
Disapprove
Abstain
Invalid
442,235,080 Votes;
0 Votes;
0 Votes;
0 Votes;
100 %
0 %
0 %
0 %
14 | P a g e
The Chairman opened for questions or comments. As there was no question, the
Chairman proposed the Meeting to re-appoint by individual director as follows:
5.1 Re-appoint Mr. Richard David Han as an executive director
Vote result: The result of the vote count was as follows.
5.2 Re-appoint Mrs. Sunun Thongbai as an independent director
Vote result: The result of the vote count was as follows.
5.3 Re-appoint Mr. Stephanus Josephus Hendrikus Brader as an independent
director
Vote result: The result of the vote count was as follows.
Resolution: The Meeting approved the re-appointment of Mr. Richard David Han as the
executive director, and Mrs. Sunun Thongbai and Mr. Stephanus Josephus
Hendrikus Brader as the independent directors who retired by rotation for another
term.
Agenda 6: To approve the directors’ remuneration for the year 2026
The Chairman proposed the meeting to consider and approve the remuneration of
the Board of Directors for the year 2026 not exceeding baht 5,000,000 which
details were enclosed in the Notice of the Meeting sent to shareholders in advance.
Approve
Disapprove
Abstain
Invalid
440,387,880 Votes;
807,100 Votes;
1,040,100 Votes;
0 Votes;
99.5823 %
0.1825 %
0.2352 %
0 %
Approve
Disapprove
Abstain
Invalid
437,619,380 Votes;
0 Votes;
4,615,700 Votes;
0 Votes;
98.9563 %
0 %
1.0437 %
0 %
Approve
Disapprove
Abstain
Invalid
437,619,380 Votes;
0 Votes;
4,615,700 Votes;
0 Votes;
98.9563 %
0 %
1.0437 %
0 %
15 | P a g e
-
There is no remuneration for executive directors as they receive the remuneration
as the Company’s management/employees, not as the Board of Directors.
The Chairman opened for questions or comments. As there was no question, the
Chairman proposed the Meeting to vote on this agenda item.
Vote result: The result of the vote count was as follows.
Resolution: The Meeting approved the directors’ remuneration for 2026 in the amount not
exceeding baht 5,000,000.
Agenda 7: To approve the appointment of the Company’s auditors for the year 2026 and
to fix their remuneration
The Chairman proposed the Meeting to consider and approve the appointment of
the following auditors for the year 2026.
- Mrs. Sarinda Hirunprasurtwutti C.P.A. Registration No. 4799 and/or
- Mr. Wichart Lokatekrawee C.P.A. Registration No. 4451 and/or
- Ms. Natteera Pongpinitpinyo, C.P.A. Registration No. 7362
of EY Office Limited to be the auditors of the Company for the year 2026 with the
total remuneration of not exceeding baht 2,950,000 (excluding out-of-pocket
expenses). In the event those auditors are unable to perform their duties, EY Office
Limited is authorized to assign another of its auditors to perform the audit and
express an opinion on the Company’s financial statements in their place.
The Chairman opened for questions or comments. As there was no question, the
Chairman proposed the Meeting to vote on this agenda item.
Position Meeting Allowance
(Baht/Time)
Bonus Other
Benefits
Chairman of the Board 98,540 baht Minimum half time of
meeting allowance or
depend on the
Company’s performance
None
Independent Directors
58,916 baht Minimum half time of
meeting allowance or
depend on the
Company’s performance
None
Executive Directors*
None None None
Approve
Disapprove
Abstain
Invalid
442,232,980 Votes;
2,000 Votes;
100 Votes;
0 Votes;
99.9995 %
0.0005 %
0 %
0 %
16 | P a g e
Vote result: The result of the vote count was as follows.
Resolution: The Meeting approved the appointment of Mrs. Sarinda Hirunprasurtwutti C.P.A.
Registration No. 4799 and/or Mr. Wichart Lokatekrawee C.P.A. Registration No.
4451 and/or Ms. Natteera Pongpinitpinyo C.P.A. Registration No. 7362 of EY
Office Limited as the auditors of Hana Microelectronics Public Co., Ltd. for the
year 2026 with the total remuneration not exceeding baht 2,950,000.
Agenda 8: Other business
There was no any other business.
The Chairman informed the Meeting that all the business agenda items had completed. The
Chairman asked if any shareholders desired other matters to be discussed, or any additional
questions to ask. The following questions were received from shareholders.
Mr. Vicha Chokpongpan (A shareholder): Has the on-going Thailand–Cambodia conflict
affected the operations of your factory in Cambodia in any way?
Mr. Richard David Han (CEO): When the conflict began, we assured employees of our priority
to protect their jobs and livelihoods. Initially, operations in Koh Kong were unaffected, but
towards the end of last year, the conflict reached the area, causing a temporary shutdown of the
industrial estate for about 10 days.
During this time, we advanced bonus payments to support employees who had no income, helping
to maintain goodwill. Once the situation stabilized, most employees returned to work.
Our top priority has always been the safety of all staff, regardless of nationality, and maintaining
customer confidence. We proactively communicated with customers to reassure them and have
worked closely to ensure continued satisfaction.
As long as the situation does not deteriorate further, we do not anticipate any major issues. While
the border remains closed, resulting in higher logistics costs for shipments, the overall impact
remains minimal as our supply chain continues to function smoothly. We hope the situation
improves soon and that the border can be reopened in the near future.
Mr. Phuvit Paladikanon (A shareholder): Is there any risk that we may not pass the new product
qualification process for the new AI solid-state cooling products?
Mr. Richard David Han (CEO): While there is always some risk, we are confident that our
process will succeed. Recent reports indicate that progress is on track, and we remain optimistic
about passing the qualification process. However, risk is inherent, which is why qualification
exists.
Approve
Disapprove
Abstain
Invalid
442,235,080 Votes;
0 Votes;
0 Votes;
0 Votes;
100 %
0 %
0 %
0 %
17 | P a g e
If an issue arises, it doesn’t mean the project is over. We will identify the problem, find a solution,
and make necessary adjustments. In manufacturing, it’s not all-or-nothing; it’s about evaluating
our progress, identifying root causes, and fine-tuning parameters, especially when developing new
in-house designs, which often require adjustments.
While delays are possible, the worst-case scenario is a delay, not a failure of the process itself.
Mr. Phuvit Paladikanon (A shareholder): What is the estimated percentage of usage of the
Company’s AI solid-state cooling products within data centers?
Mr. Insuk Kim (CTO): Currently, most AI data centers use air cooling, with some adopting
liquid cooling. The industry is still dominated by air cooling, with approximately 80% using air
cooling and 20% using liquid cooling.
Our new "solid-state cooling technology" offers a unique and effective solution for reducing heat
in semiconductor devices, providing a promising alternative for data centers. Unlike liquid
cooling, which requires substantial investment in tanks and infrastructure, both air and solid-state
cooling are simpler and more cost-effective. In my view, solid-state cooling holds great potential.
Mr. Jatupon Patwichaipon (A shareholder): What is the projected production volume for the
AI solid-state cooling products being discussed?
Mr. Richard David Han (CEO): We are unable to disclose that level of detail. However, as I
mentioned earlier, we believe that by next year, as production volume ramps up, this product line
could become one of the top 10 customers of the Hana Group.
Mr. Jatupon Patwichaipon (A shareholder): Has Power Master in South Korea, which
previously faced financial losses, shown signs of improvement recently?
Mr. Richard David Han (CEO): Power Master has been operating at a loss but is expected to
show gradual improvement this year, though profitability is not expected yet. The improving
semiconductor cycle and AI demand offer new opportunities for Power Master to supply
companies facing supply shortages
A challenge we're facing is the decline in semiconductor prices from Chinese manufacturers,
which has impacted our ability to compete and maintain margins. In response, we are focusing on
alternative markets in India and Korea, where we already have manufacturing facilities. While
market development takes time, we are starting to see some early results from nine months of
marketing efforts.
We anticipate some improvement in the second half of this year, though it won’t reach our desired
level. Our design team is also working on next-generation devices that support energy efficiency
for data centers and AI applications. As power availability becomes a growing concern for data
centers, silicon carbide devices, which improve energy transmission efficiency, are expected to
play an important role in the long term.
In summary, while our losses are expected to decrease this year, improvements in solid-state
cooling and other businesses, along with a recovering semiconductor market, give us cautious
optimism for the second half. However, this outlook is contingent on the situation in the Middle
East and other geopolitical risks.
18 | P a g e
Mr. Jatupon Patwichaipon (A shareholder): As AI and Data Center markets continue to grow
rapidly, does the Company foresee additional collaborations beyond the current AI project in
Lamphun?
Mr. Richard David Han (CEO): We are currently engaged in several discussions and
development efforts. However, we prefer to take a cautious approach and wait until these projects
move beyond the concept stage and show strong potential to become viable business opportunities
before making any public announcements. Once that happens, we will be delighted to provide
further updates.
As there was no any other item brought up and no further question, the Chairman expressed his
thanks and appreciation to shareholders who attended the meeting. The Chairman then declared
the Meeting adjourned at 16.08 hrs.
Mr. John Thompson
Chairman of the Board of Directors