Rules 4.7.3 and 4.10.3 ASX Listing Rules Appendix 4G (current at 17/7/2020) Page 1 Appendix 4G Key to Disclosures Corporate Governance Council Principles and Recommendations Name of entity MaxiPARTS Limited ABN/ARBN Financial year ended: 58 006 797…
Rules 4.7.3 and 4.10.3
ASX Listing Rules Appendix 4G (current at 17/7/2020) Page 1
Appendix 4G
Key to Disclosures
Corporate Governance Council Principles and Recommendations
Name of entity
MaxiPARTS Limited
ABN/ARBN Financial year ended:
58 006 797 173 30 June 2026
Our corporate governance statement
1
for the period above can be found at:
2
☐
These pages of our
annual report:
☒
This URL on our
website:
www.maxipartslimited.com.au/corporate-governance
The Corporate Governance Statement is accurate and up to date as at 30 June 2026 and has been
approved by the board.
The annexure includes a key to where our corporate governance disclosures can be located.
3
Date: 23 October 2026
Name of authorised officer
authorising lodgement:
Anu Parikh, Company Secretary
1
“Corporate governance statement” is defined in Listing Rule 19.12 to mean the statement referred to in Listing Rule 4.10.3 which
discloses the extent to which an entity has followed the recommendations set by the ASX Corporate Governance Council during
a particular reporting period.
Listing Rule 4.10.3 requires an entity that is included in the official list as an ASX Listing to include in its annual report either a
corporate governance statement that meets the requirements of that rule or the URL of the page on its website where such a
statement is located. The corporate governance statement must disclose the extent to which the entity has followed the
recommendations set by the ASX Corporate Governance Council during the reporting period. If the entity has not followed a
recommendation for any part of the reporting period, its corporate governance statement must separately identify that
recommendation and the period during which it was not followed and state its reasons for not following the recommendation and
what (if any) alternative governance practices it adopted in lieu of the recommendation during that period.
Under Listing Rule 4.7.4, if an entity chooses to include its corporate governance statement on its website rather than in its annual
report, it must lodge a copy of the corporate governance statement with ASX at the same time as it lodges its annual report with
ASX. The corporate governance statement must be current as at the effective date specified in that statement for the purposes of
Listing Rule 4.10.3.
Under Listing Rule 4.7.3, an entity must also lodge with ASX a completed Appendix 4G at the same time as it lodges its annual
report with ASX. The Appendix 4G serves a dual purpose. It acts as a key designed to assist readers to locate the governance
disclosures made by a listed entity under Listing Rule 4.10.3 and under the ASX Corporate Governance Council’s
recommendations. It also acts as a verification tool for listed entities to confirm that they have met the disclosure requirements of
Listing Rule 4.10.3.
The Appendix 4G is not a substitute for, and is not to be confused with, the entity's corporate governance statement. They serve
different purposes and an entity must produce each of them separately.
2
Tick whichever option is correct and then complete the page number(s) of the annual report, or the URL of the web page, where
your corporate governance statement can be found. You can, if you wish, delete the option which is not applicable.
3
Throughout this form, where you are given two or more options to select, you can, if you wish, delete any option which is not
applicable and just retain the option that is applicable. If you select an option that includes “OR” at the end of the selection and
you delete the other options, you can also, if you wish, delete the “OR” at the end of the selection.
See notes 4 and 5 below for further instructions on how to complete this form.
Appendix 4G
Key to Disclosures Corporate Governance Council Principles and Recommendations
ASX Listing Rules Appendix 4G (current at 17/7/2020) Page 2
ANNEXURE – KEY TO CORPORATE GOVERNANCE DISCLOSURES
Corporate Governance Council recommendation Where a box below is ticked,
4
we have followed the
recommendation in full for the whole of the period above. We
have disclosed this in our Corporate Governance Statement:
Where a box below is ticked, we have NOT followed the
recommendation in full for the whole of the period above. Our
reasons for not doing so are:
5
PRINCIPLE 1 – LAY SOLID FOUNDATIONS FOR MANAGEMENT AND OVERSIGHT
1.1 A listed entity should have and disclose a board charter setting
out:
(a) the respective roles and responsibilities of its board and
management; and
(b) those matters expressly reserved to the board and those
delegated to management.
☒
and we have disclosed a copy of our board charter at:
www.maxipartslimited.com.au/corporate-governance
☐ set out in our Corporate Governance Statement OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
1.2 A listed entity should:
(a) undertake appropriate checks before appointing a director or
senior executive or putting someone forward for election as
a director; and
(b) provide security holders with all material information in its
possession relevant to a decision on whether or not to elect
or re-elect a director.
☒
☐ set out in our Corporate Governance Statement OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
1.3 A listed entity should have a written agreement with each director
and senior executive setting out the terms of their appointment.
☒
☐ set out in our Corporate Governance Statement OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
1.4 The company secretary of a listed entity should be accountable
directly to the board, through the chair, on all matters to do with
the proper functioning of the board.
☒
☐ set out in our Corporate Governance Statement OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
4
Tick the box in this column only if you have followed the relevant recommendation in full for the whole of the period above. Where the recommendation has a disclosure obligation attached, you must insert
the location where that disclosure has been made, where indicated by the line with “insert location” underneath. If the disclosure in question has been made in your corporate governance statement, you
need only insert “our corporate governance statement”. If the disclosure has been made in your annual report, you should insert the page number(s) of your annual report (eg “pages 10-12 of our annual
report”). If the disclosure has been made on your website, you should insert the URL of the web page where the disclosure has been made or can be accessed (eg “www.entityname.com.au/corporate
governance/charters/”).
5
If you have followed all of the Council’s recommendations in full for the whole of the period above, you can, if you wish, delete this column from the form and re-format it.
Appendix 4G
Key to Disclosures Corporate Governance Council Principles and Recommendations
ASX Listing Rules Appendix 4G (current at 17/7/2020) Page 3
Corporate Governance Council recommendation Where a box below is ticked,
4
we have followed the
recommendation in full for the whole of the period above. We
have disclosed this in our Corporate Governance Statement:
Where a box below is ticked, we have NOT followed the
recommendation in full for the whole of the period above. Our
reasons for not doing so are:
5
1.5 A listed entity should:
(a) have and disclose a diversity policy;
(b) through its board or a committee of the board set
measurable objectives for achieving gender diversity in the
composition of its board, senior executives and workforce
generally; and
(c) disclose in relation to each reporting period:
(1) the measurable objectives set for that period to
achieve gender diversity;
(2) the entity’s progress towards achieving those
objectives; and
(3) either:
(A) the respective proportions of men and women
on the board, in senior executive positions and
across the whole workforce (including how the
entity has defined “senior executive” for these
purposes); or
(B) if the entity is a “relevant employer” under the
Workplace Gender Equality Act, the entity’s
most recent “Gender Equality Indicators”, as
defined in and published under that Act.
If the entity was in the S&P / ASX 300 Index at the
commencement of the reporting period, the measurable objective
for achieving gender diversity in the composition of its board
should be to have not less than 30% of its directors of each
gender within a specified period.
☒
and we have disclosed a copy of our diversity policy at:
www.maxipartslimited.com.au/corporate-governance
and we have disclosed the information referred to in paragraph (c)
(other than sub-paragraphs (1) and (2)) at:
www.maxipartslimited.com.au/corporate-governance/
and in our Corporate Governance Statement
and if we were included in the S&P / ASX 300 Index at the
commencement of the reporting period our measurable objective for
achieving gender diversity in the composition of its board of not less
than 30% of its directors of each gender within a specified period.
☐ set out in our Corporate Governance Statement OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
1.6 A listed entity should:
(a) have and disclose a process for periodically evaluating the
performance of the board, its committees and individual
directors; and
(b) disclose for each reporting period whether a performance
evaluation has been undertaken in accordance with that
process during or in respect of that period.
☒
and we have disclosed the evaluation process referred to in
paragraph (a) at:
in our Corporate Governance Statement
and whether a performance evaluation was undertaken for the
reporting period in accordance with that process at:
in our Corporate Governance Statement
☐ set out in our Corporate Governance Statement OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
Appendix 4G
Key to Disclosures Corporate Governance Council Principles and Recommendations
ASX Listing Rules Appendix 4G (current at 17/7/2020) Page 4
Corporate Governance Council recommendation Where a box below is ticked,
4
we have followed the
recommendation in full for the whole of the period above. We
have disclosed this in our Corporate Governance Statement:
Where a box below is ticked, we have NOT followed the
recommendation in full for the whole of the period above. Our
reasons for not doing so are:
5
1.7 A listed entity should:
(a) have and disclose a process for evaluating the performance
of its senior executives at least once every reporting period;
and
(b) disclose for each reporting period whether a performance
evaluation has been undertaken in accordance with that
process during or in respect of that period.
☒
and we have disclosed the evaluation process referred to in
paragraph (a) at:
in the Annual Report, available at
www.maxipartslimited.com.au/annual-reports/
and whether a performance evaluation was undertaken for the
reporting period in accordance with that process at:
in the in the Annual Report, available at
www.maxipartslimited.com.au/annual-reports/
☐ set out in our Corporate Governance Statement OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
Appendix 4G
Key to Disclosures Corporate Governance Council Principles and Recommendations
ASX Listing Rules Appendix 4G (current at 17/7/2020) Page 5
Corporate Governance Council recommendation Where a box below is ticked,
4
we have followed the
recommendation in full for the whole of the period above. We
have disclosed this in our Corporate Governance Statement:
Where a box below is ticked, we have NOT followed the
recommendation in full for the whole of the period above. Our
reasons for not doing so are:
5
PRINCIPLE 2 - STRUCTURE THE BOARD TO BE EFFECTIVE AND ADD VALUE
2.1 The board of a listed entity should:
(a) have a nomination committee which:
(1) has at least three members, a majority of whom are
independent directors; and
(2) is chaired by an independent director,
and disclose:
(3) the charter of the committee;
(4) the members of the committee; and
(5) as at the end of each reporting period, the number
of times the committee met throughout the period
and the individual attendances of the members at
those meetings; or
(b) if it does not have a nomination committee, disclose that
fact and the processes it employs to address board
succession issues and to ensure that the board has the
appropriate balance of skills, knowledge, experience,
independence and diversity to enable it to discharge its
duties and responsibilities effectively.
☒
and we have disclosed a copy of the charter of the committee at:
www.maxipartslimited.com.au/corporate-governance
and the information referred to in paragraphs (4) and (5) at:
in the Annual Report, available at
www.maxipartslimited.com.au/annual-reports/
☐ set out in our Corporate Governance Statement OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
2.2 A listed entity should have and disclose a board skills matrix
setting out the mix of skills that the board currently has or is
looking to achieve in its membership.
☒
and we have disclosed our board skills matrix at:
in the Corporate Governance Statement
☐ set out in our Corporate Governance Statement OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
2.3 A listed entity should disclose:
(a) the names of the directors considered by the board to be
independent directors;
(b) if a director has an interest, position, affiliation or
relationship of the type described in Box 2.3 but the board
is of the opinion that it does not compromise the
independence of the director, the nature of the interest,
position or relationship in question and an explanation of
why the board is of that opinion; and
(c) the length of service of each director.
☒
and we have disclosed the names of the directors considered by the
board to be independent directors at:
in our Corporate Governance Statement
and, where applicable, the information referred to in paragraph (b)
at:
in our Corporate Governance Statement
and the length of service of each director at:
in the Annual Report, available at
www.maxipartslimited.com.au/annual-reports/
☐ set out in our Corporate Governance Statement
Appendix 4G
Key to Disclosures Corporate Governance Council Principles and Recommendations
ASX Listing Rules Appendix 4G (current at 17/7/2020) Page 6
Corporate Governance Council recommendation Where a box below is ticked,
4
we have followed the
recommendation in full for the whole of the period above. We
have disclosed this in our Corporate Governance Statement:
Where a box below is ticked, we have NOT followed the
recommendation in full for the whole of the period above. Our
reasons for not doing so are:
5
2.4 A majority of the board of a listed entity should be independent
directors.
☒
☐ set out in our Corporate Governance Statement OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
2.5 The chair of the board of a listed entity should be an
independent director and, in particular, should not be the same
person as the CEO of the entity.
☒
☐ set out in our Corporate Governance Statement OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
2.6 A listed entity should have a program for inducting new
directors and for periodically reviewing whether there is a need
for existing directors to undertake professional development to
maintain the skills and knowledge needed to perform their role
as directors effectively.
☒
☐ set out in our Corporate Governance Statement OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
PRINCIPLE 3 – INSTIL A CULTURE OF ACTING LAWFULLY, ETHICALLY AND RESPONSIBLY
3.1 A listed entity should articulate and disclose its values.
☒
and we have disclosed our code of conduct at:
www.maxipartslimited.com.au/corporate-governance
☐ set out in our Corporate Governance Statement
3.2 A listed entity should:
(a) have and disclose a code of conduct for its directors,
senior executives and employees; and
(b) ensure that the board or a committee of the board is
informed of any material breaches of that code.
☒
and we have disclosed our code of conduct at:
www.maxipartslimited.com.au/corporate-governance
☐ set out in our Corporate Governance Statement
3.3 A listed entity should:
(a) have and disclose a whistleblower policy; and
(b) ensure that the board or a committee of the board is
informed of any material incidents reported under that
policy.
☒
and we have disclosed our whistleblower policy at:
www.maxipartslimited.com.au/corporate-governance
☐ set out in our Corporate Governance Statement
3.4 A listed entity should:
(a) have and disclose an anti-bribery and corruption policy;
and
(b) ensure that the board or committee of the board is
informed of any material breaches of that policy.
☒
and we have disclosed our anti-bribery and corruption policy
in the Code of Conduct at:
www.maxipartslimited.com.au/corporate-governance
☐ set out in our Corporate Governance Statement
Appendix 4G
Key to Disclosures Corporate Governance Council Principles and Recommendations
ASX Listing Rules Appendix 4G (current at 17/7/2020) Page 7
Corporate Governance Council recommendation Where a box below is ticked,
4
we have followed the
recommendation in full for the whole of the period above. We
have disclosed this in our Corporate Governance Statement:
Where a box below is ticked, we have NOT followed the
recommendation in full for the whole of the period above. Our
reasons for not doing so are:
5
PRINCIPLE 4 – SAFEGUARD THE INTEGRITY OF CORPORATE REPORTS
4.1 The board of a listed entity should:
(a) have an audit committee which:
(1) has at least three members, all of whom are non-
executive directors and a majority of whom are
independent directors; and
(2) is chaired by an independent director, who is not
the chair of the board,
and disclose:
(3) the charter of the committee;
(4) the relevant qualifications and experience of the
members of the committee; and
(5) in relation to each reporting period, the number of
times the committee met throughout the period and
the individual attendances of the members at those
meetings; or
(b) if it does not have an audit committee, disclose that fact
and the processes it employs that independently verify
and safeguard the integrity of its corporate reporting,
including the processes for the appointment and removal
of the external auditor and the rotation of the audit
engagement partner.
☒
and we have disclosed a copy of the charter of the committee at:
www.maxipartslimited.com.au/corporate-governance
and the information referred to in paragraphs (4) and (5) at: in the
Annual Report, available at
www.maxipartslimited.com.au/annual-reports/
☐ set out in our Corporate Governance Statement
4.2 The board of a listed entity should, before it approves the
entity’s financial statements for a financial period, receive from
its CEO and CFO a declaration that, in their opinion, the
financial records of the entity have been properly maintained
and that the financial statements comply with the appropriate
accounting standards and give a true and fair view of the
financial position and performance of the entity and that the
opinion has been formed on the basis of a sound system of risk
management and internal control which is operating effectively.
☒
☐ set out in our Corporate Governance Statement
4.3 A listed entity should disclose its process to verify the integrity
of any periodic corporate report it releases to the market that is
not audited or reviewed by an external auditor.
☒
☐ set out in our Corporate Governance Statement
Appendix 4G
Key to Disclosures Corporate Governance Council Principles and Recommendations
ASX Listing Rules Appendix 4G (current at 17/7/2020) Page 8
Corporate Governance Council recommendation Where a box below is ticked,
4
we have followed the
recommendation in full for the whole of the period above. We
have disclosed this in our Corporate Governance Statement:
Where a box below is ticked, we have NOT followed the
recommendation in full for the whole of the period above. Our
reasons for not doing so are:
5
PRINCIPLE 5 – MAKE TIMELY AND BALANCED DISCLOSURE
5.1 A listed entity should have and disclose a written policy for
complying with its continuous disclosure obligations under
listing rule 3.1.
☒
and we have disclosed our continuous disclosure compliance policy
at:
www.maxipartslimited.com.au/corporate-governance
☐ set out in our Corporate Governance Statement
5.2 A listed entity should ensure that its board receives copies of all
material market announcements promptly after they have been
made.
☒
☐ set out in our Corporate Governance Statement
5.3 A listed entity that gives a new and substantive investor or
analyst presentation should release a copy of the presentation
materials on the ASX Market Announcements Platform ahead
of the presentation.
☒
☐ set out in our Corporate Governance Statement
PRINCIPLE 6 – RESPECT THE RIGHTS OF SECURITY HOLDERS
6.1 A listed entity should provide information about itself and its
governance to investors via its website.
☒
and we have disclosed information about us and our governance on
our website at:
www.maxipartslimited.com.au/corporate-governance
☐ set out in our Corporate Governance Statement
6.2 A listed entity should have an investor relations program that
facilitates effective two-way communication with investors.
☒
☐ set out in our Corporate Governance Statement
6.3 A listed entity should disclose how it facilitates and encourages
participation at meetings of security holders.
☒
and we have disclosed how we facilitate and encourage participation
at meetings of security holders at:
www.maxipartslimited.com.au/corporate-governance
☐ set out in our Corporate Governance Statement
6.4 A listed entity should ensure that all substantive resolutions at a
meeting of security holders are decided by a poll rather than by
a show of hands.
☒ ☐ set out in our Corporate Governance Statement
6.5 A listed entity should give security holders the option to receive
communications from, and send communications to, the entity
and its security registry electronically.
☒
☐ set out in our Corporate Governance Statement
Appendix 4G
Key to Disclosures Corporate Governance Council Principles and Recommendations
ASX Listing Rules Appendix 4G (current at 17/7/2020) Page 9
Corporate Governance Council recommendation Where a box below is ticked,
4
we have followed the
recommendation in full for the whole of the period above. We
have disclosed this in our Corporate Governance Statement:
Where a box below is ticked, we have NOT followed the
recommendation in full for the whole of the period above. Our
reasons for not doing so are:
5
PRINCIPLE 7 – RECOGNISE AND MANAGE RISK
7.1 The board of a listed entity should:
(a) have a committee or committees to oversee risk, each of
which:
(1) has at least three members, a majority of whom are
independent directors; and
(2) is chaired by an independent director,
and disclose:
(3) the charter of the committee;
(4) the members of the committee; and
(5) as at the end of each reporting period, the number
of times the committee met throughout the period
and the individual attendances of the members at
those meetings; or
(b) if it does not have a risk committee or committees that
satisfy (a) above, disclose that fact and the processes it
employs for overseeing the entity’s risk management
framework.
☒
and we have disclosed a copy of the charter of the committee at:
www.maxipartslimited.com.au/corporate-governance
and the information referred to in paragraphs (4) and (5) at:
in the in the Annual Report, available at
www.maxipartslimited.com.au/annual-reports/
☐ set out in our Corporate Governance Statement
7.2 The board or a committee of the board should:
(a) review the entity’s risk management framework at least
annually to satisfy itself that it continues to be sound and
that the entity is operating with due regard to the risk
appetite set by the board; and
(b) disclose, in relation to each reporting period, whether
such a review has taken place.
☒
and we have disclosed whether a review of the entity’s risk
management framework was undertaken during the reporting period
at:
in the Corporate Governance Statement
☐ set out in our Corporate Governance Statement
7.3 A listed entity should disclose:
(a) if it has an internal audit function, how the function is
structured and what role it performs; or
(b) if it does not have an internal audit function, that fact and
the processes it employs for evaluating and continually
improving the effectiveness of its governance, risk
management and internal control processes.
☒
and we have disclosed the fact that we do not have an internal audit
function and the processes we employ for evaluating and continually
improving the effectiveness of our risk management and internal
control processes at:
in our Corporate Governance Statement
☐ set out in our Corporate Governance Statement
Appendix 4G
Key to Disclosures Corporate Governance Council Principles and Recommendations
ASX Listing Rules Appendix 4G (current at 17/7/2020) Page 10
Corporate Governance Council recommendation Where a box below is ticked,
4
we have followed the
recommendation in full for the whole of the period above. We
have disclosed this in our Corporate Governance Statement:
Where a box below is ticked, we have NOT followed the
recommendation in full for the whole of the period above. Our
reasons for not doing so are:
5
7.4 A listed entity should disclose whether it has any material
exposure to environmental or social risks and, if it does, how it
manages or intends to manage those risks.
☒
and we have disclosed whether we have any material exposure to
environmental and social risks at:
in the Annual Report, available at
www.maxipartslimited.com.au/annual-reports/
and, if we do, how we manage or intend to manage those risks at:
in the Annual Report, available at
www.maxipartslimited.com.au/annual-reports/
☐ set out in our Corporate Governance Statement
Appendix 4G
Key to Disclosures Corporate Governance Council Principles and Recommendations
ASX Listing Rules Appendix 4G (current at 17/7/2020) Page 11
Corporate Governance Council recommendation Where a box below is ticked,
4
we have followed the
recommendation in full for the whole of the period above. We
have disclosed this in our Corporate Governance Statement:
Where a box below is ticked, we have NOT followed the
recommendation in full for the whole of the period above. Our
reasons for not doing so are:
5
PRINCIPLE 8 – REMUNERATE FAIRLY AND RESPONSIBLY
8.1 The board of a listed entity should:
(a) have a remuneration committee which:
(1) has at least three members, a majority of whom are
independent directors; and
(2) is chaired by an independent director,
and disclose:
(3) the charter of the committee;
(4) the members of the committee; and
(5) as at the end of each reporting period, the number
of times the committee met throughout the period
and the individual attendances of the members at
those meetings; or
(b) if it does not have a remuneration committee, disclose
that fact and the processes it employs for setting the level
and composition of remuneration for directors and senior
executives and ensuring that such remuneration is
appropriate and not excessive.
☒
and we have disclosed a copy of the charter of the committee at:
www.maxipartslimited.com.au/corporate-governance
and the information referred to in paragraphs (4) and (5) at:
in the Annual Report, available at
www.maxipartslimited.com.au/annual-reports/
☐ set out in our Corporate Governance Statement OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
8.2 A listed entity should separately disclose its policies and
practices regarding the remuneration of non-executive directors
and the remuneration of executive directors and other senior
executives.
☒
and we have disclosed separately our remuneration policies and
practices regarding the remuneration of non-executive directors and
the remuneration of executive directors and other senior executives
at:
in the Annual Report, available at
www.maxipartslimited.com.au/annual-reports/
☐ set out in our Corporate Governance Statement OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
8.3 A listed entity which has an equity-based remuneration scheme
should:
(a) have a policy on whether participants are permitted to
enter into transactions (whether through the use of
derivatives or otherwise) which limit the economic risk of
participating in the scheme; and
(b) disclose that policy or a summary of it.
☒
and we have disclosed our policy on this issue or a summary of it at:
in our Corporate Governance Statement
☐ set out in our Corporate Governance Statement OR
☐ we do not have an equity-based remuneration scheme and
this recommendation is therefore not applicable OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
Appendix 4G
Key to Disclosures Corporate Governance Council Principles and Recommendations
ASX Listing Rules Appendix 4G (current at 17/7/2020) Page 12
Corporate Governance Council recommendation Where a box below is ticked,
4
we have followed the
recommendation in full for the whole of the period above. We
have disclosed this in our Corporate Governance Statement:
Where a box below is ticked, we have NOT followed the
recommendation in full for the whole of the period above. Our
reasons for not doing so are:
5
ADDITIONAL RECOMMENDATIONS THAT APPLY ONLY IN CERTAIN CASES
9.1 A listed entity with a director who does not speak the language
in which board or security holder meetings are held or key
corporate documents are written should disclose the processes
it has in place to ensure the director understands and can
contribute to the discussions at those meetings and
understands and can discharge their obligations in relation to
those documents.
☐
and we have disclosed information about the processes in place at:
.................................................................................
[insert location]
☐ set out in our Corporate Governance Statement OR
☒ we do not have a director in this position and this
recommendation is therefore not applicable OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
9.2 A listed entity established outside Australia should ensure that
meetings of security holders are held at a reasonable place and
time.
☐
☐ set out in our Corporate Governance Statement OR
☒ we are established in Australia and this recommendation is
therefore not applicable OR
☐ we are an externally managed entity and this recommendation
is therefore not applicable
9.3 A listed entity established outside Australia, and an externally
managed listed entity that has an AGM, should ensure that its
external auditor attends its AGM and is available to answer
questions from security holders relevant to the audit.
☐
☐ set out in our Corporate Governance Statement OR
☒ we are established in Australia and not an externally managed
listed entity and this recommendation is therefore not
applicable
☐ we are an externally managed entity that does not hold an
AGM and this recommendation is therefore not applicable
ADDITIONAL DISCLOSURES APPLICABLE TO EXTERNALLY MANAGED LISTED ENTITIES
- Alternative to Recommendation 1.1 for externally managed
listed entities:
The responsible entity of an externally managed listed entity
should disclose:
(a) the arrangements between the responsible entity and the
listed entity for managing the affairs of the listed entity;
and
(b) the role and responsibility of the board of the responsible
entity for overseeing those arrangements.
☐
and we have disclosed the information referred to in paragraphs (a)
and (b) at:
.........................................................................................
[insert location]
☐ set out in our Corporate Governance Statement
Appendix 4G
Key to Disclosures Corporate Governance Council Principles and Recommendations
ASX Listing Rules Appendix 4G (current at 17/7/2020) Page 13
Corporate Governance Council recommendation Where a box below is ticked,
4
we have followed the
recommendation in full for the whole of the period above. We
have disclosed this in our Corporate Governance Statement:
Where a box below is ticked, we have NOT followed the
recommendation in full for the whole of the period above. Our
reasons for not doing so are:
5
- Alternative to Recommendations 8.1, 8.2 and 8.3 for externally
managed listed entities:
An externally managed listed entity should clearly disclose the
terms governing the remuneration of the manager.
☐
and we have disclosed the terms governing our remuneration as
manager of the entity at:
.........................................................................................
[insert location]
☐ set out in our Corporate Governance Statement
1
CORPORATE GOVERNANCE
STATEMENT
MAXIPARTS LIMITED ACN 006 797 173
FOR THE YEAR ENDED 30 JUNE 2026
INTRODUCTION
This Corporate Governance Statement reflects the corporate governance policies and practices of
MaxiPARTS Limited (the Company) and its controlled entities (the Group) as at 30 June 2026 and which,
unless otherwise stated, were in place throughout the year.
This Statement is structured in order of the corporate governance principles set out in the ASX Corporate
Governance Council’s Corporate Governance Principles and Recommendations (4th edition) (the
Principles and Recommendations).
This Statement refers to the 2026 Report of Directors and the 2026 Remuneration Report which are
available from the Group’s website, www.maxipartslimited.com.au/annual-reports/
PRINCIPLE 1: LAY SOLID FOUNDATIONS FOR MANAGEMENT AND OVERSIGHT
Recommendation 1.1:
Have and disclose a Board Charter setting out:
(a) the respective roles and responsibilities of the Board and management; and
(b) those matters expressly reserved to the Board and those delegated to management.
The Board acts on behalf of the Company as a whole and is accountable to shareholders for the overall
direction, management and corporate governance of the Group.
The Company’s Board Charter sets out the role and responsibilities of the Board. The Board Charter is
available from the Corporate Governance section of the Group’s website,
www.maxipartslimited.com.au/corporate-governance
The Board has also approved a Delegation of Authority Policy to set out the nature and quantum of authority
limits at varying levels of the organisation. The Policy reserves particular matters for Board approval.
Matters which are specifically reserved for the Board or its Committees include:
• appointing and removing the Managing Director, and monitoring the performance of the Managing
Director;
• ratifying the appointment and, where appropriate, the removal of the Chief Financial Officer;
• appointing the Company Secretary;
• approving senior management remuneration policies and practices;
• approving succession plans for the executive leadership team;
• monitoring and reviewing the performance of the executive leadership team;
• reporting to shareholders;
• providing input into management’s development of corporate strategy and approving the annual
financial budget and strategic plan;
• reviewing and ratifying systems of risk management and internal compliance and control;
• monitoring compliance with regulatory requirements and the Company’s standards and policies;
• approving the payment of dividends;
• approving and monitoring the progress of major capital expenditure, capital management and
acquisitions and divestments;
• approving the half-yearly and annual financial reports to ASX and shareholders;
• monitoring and ensuring compliance with best practice corporate governance requirements; and
• appointing the Chair of the Board.
Responsibility for the day-to-day management and administration of the Group is delegated by the Board
to the Managing Director and the executive leadership team. The Managing Director manages the Group
in accordance with the strategy, plans and policies approved by the Board. The Board has procedures in
place to assess the performance of the Managing Director and the executive leadership team.
2
CORPORATE GOVERNANCE
STATEMENT
MAXIPARTS LIMITED ACN 006 797 173
FOR THE YEAR ENDED 30 JUNE 2026
The responsibilities of the Managing Director include:
• developing and recommending to the Board strategies, business plans and annual budgets for the
Group, and implementing the strategies, business plans and budgets approved by the Board;
• providing effective leadership, direction and supervision of the executive leadership team; and
• developing and managing resources, policies and systems to ensure the effective operation of the
Company and the Group;
• managing resources within budgets approved by the Board;
• ensuring compliance with applicable laws and regulations;
• ensuring the Board is given sufficient information to enable it to perform its functions, set strategies
and monitor performance; and
• acting within the authority delegated by the Board.
Recommendation 1.2:
Undertake appropriate checks before appointing a director or senior executive or putting someone
forward for election as a director. Provide security holders with all material information in the
possession of the company relevant to a decision on whether or not to elect or re-elect a director
The Nomination Committee is responsible for making recommendations to the Board about the
appointment of Directors. As part of that process, the Nomination Committee will undertake appropriate
checks before making such a recommendation. The Report of Directors and the notice for the Company’s
annual general meeting contain information about directors who are seeking election or re-election.
The Company conducts appropriate checks before appointing a Director or senior executive.
Recommendation 1.3:
Each Director and senior executive should have a written agreement setting out the terms of their
appointment
Each Director and senior executive are appointed under a written agreement setting out the terms of their
appointment.
Recommendation 1.4:
The Company Secretary should be accountable directly to the Board, through the Chair, on all
matters to do with the proper functioning of the Board
The Company Secretary is accountable directly to the Board, through the Chair, on all matters to do with
the proper functioning of the Board.
Recommendation 1.5:
• Have and disclose a diversity policy.
• Ensure the board or a board committee sets measurable objectives for achieving gender
diversity in the composition of the board, senior executives and workforce generally.
• Disclose at the end of each reporting period the measurable objectives for achieving gender
diversity set by the board or the board committee and progress towards achieving them.
• Disclose the entity’s most recent “Gender Equity Indicators” as published under the
Workplace Gender Equality Act.
The Group’s Workplace Diversity, Equality and Inclusion (DEI) Policy confirms MaxiPARTS Limited’s
commitment to providing a workplace that encourages and celebrates diversity, enabling each employee
to fully contribute to the organisation’s success. A copy of the policy is available from the Corporate
Governance section of the Group’s website, www.maxipartslimited.com.au/corporate-governance
The Group believes that perspectives resulting from a diverse workforce promote innovation and business
success, increasing productivity and competitiveness. Under the Policy, diversity encompasses differences
including but not limited to gender, age, nationality, race, culture, sexual orientation, religious beliefs, social
background, disability, family status, marital status, political opinions, physical and mental ability,
experience and education.
3
CORPORATE GOVERNANCE
STATEMENT
MAXIPARTS LIMITED ACN 006 797 173
FOR THE YEAR ENDED 30 JUNE 2026
Under the Policy, the executive leadership team are responsible for:
• promoting a working environment that encourages outstanding performance, cooperation, trust
and mutual respect;
• ensuring fair and equal practice in relation to recruitment, promotion, salaries, career development
and conditions of employment;
• ensuring diversity, equity and inclusion is considered when determining the composition of
employees and senior management; and aligning DEI policies and practices with the Group’s
Values, Fair Work and Workplace Gender Equality Agency (WGEA) requirements;
• undertaking programs and ongoing training to build trust and cooperation among a diverse
workplace.
• Engaging with employees to gather feedback on DEI matters and involving them in related
decision-making processes;
• Promptly addressing any incidents of discrimination, harassment or bias, ensuring appropriate
action is taken to resolve issues and prevent recurrence; and
• Ensuring MaxiPARTS Limited’s annual reporting obligations to WGEA are met, coordinated and
delivered through the PSC team.
Under the Policy, managers and supervisors are responsible for:
• promoting a workplace free of employment practices that are biased or discriminate unlawfully
against employees, potential employees, contractors, visitors or customers;
• promoting a workplace culture that values and encourages diversity, equity and inclusion, and
leading by example to foster an inclusive culture;
• ensuring all decisions are made in a fair and equitable manner;
• valuing and promoting the diverse skills and competencies of all employees and utilising these
skills in ways that serve to enhance the performance of the organisation and improve individual job
satisfaction;
• promoting fair and unbiased recruitment, hiring and retention practices to build and maintain a
diverse workforce;
• maintaining a working environment that is free from all forms of bullying, harassment and
discrimination; and promptly addressing any incidents to resolve issues and prevent recurrence;
and
• recognising the importance of balancing workplace and domestic responsibilities and priorities.
The Workplace Diversity, Equality and Inclusion Policy require the Board of the Company to set objectives
for achieving diversity and inclusion targets. The Board must also monitor, evaluate and review progress
towards these targets.
In August 2025, the Board set the following DEI targets for the FY26 – FY28 period.
-
Leadership Diversity Goal
Gender Composition of the Workforce
• Increase the overall female workforce representation to 30% by the end of FY28
• Increase female representation in Sales & Operational areas to 25% by the end of FY28
-
Retention Targets
Equal Remuneration
• Conduct annual comprehensive gender pay gap analysis. Report results to the Board and
implement corrective actions to reduce any identified gaps
-
Workplace Culture Target
Employee consultation on Gender Equality Issues
• By the end of FY26, implement an annual gender equality consultation process across the
Group.
• Annual report presenting findings to the Board at the end of H2 outlining feedback and
next 12-month action plan
4
CORPORATE GOVERNANCE
STATEMENT
MAXIPARTS LIMITED ACN 006 797 173
FOR THE YEAR ENDED 30 JUNE 2026
Results as of the end of FY26 (EOFY26) were:
Objective Target Current Group Result
Group Female Representation (All Roles)
30% by EOFY28
21.8%
Female Representation — Sales & Operations 25% by EOFY28 16.2%
Gender Pay Gap Analysis (FY26)
(Conduct annual report & identify corrective actions)
EOFY26 Conducted as part of WGEA
and Salary Review Process
Gender Equality Consultation Process (Implement
an annual gender equality consultation process
across the Group)
EOFY26
Under development as part
of PSC Strategy Project
As at 30 June 2026, the Board of Directors consists of one female and four males. The Executive
Leadership team maintained gender diversity over the year with two female and three male (including the
Managing Director) members.
A copy of the 2025-26 Report to the Workplace Gender Equality Agency is available from the Corporate
Governance section of the Group’s website www.maxipartslimited.com.au/corporate-governance
Recommendation 1.6:
The Board should have and disclose a process for periodically evaluating the performance of the
board, its committees and individual directors. The Board should also disclose whether a
performance evaluation was undertaken in the reporting period in accordance with that process.
A formal evaluation of Board performance was concluded in FY21. The scope of the evaluation included
review of:
• the Board’s mission and goals, and the terms of reference of the Board and Committees;
• performance against the Strategic Plan;
• Board operations and processes; and
• relationships with stakeholders.
The Board has implemented the recommendations of the evaluation, including finalising the Board renewal
process.
The Chair regularly reviews the conduct of Board and Committee meetings and agrees with the Board
whether changes should be made to the content or structure of Board and Committee meetings. The Board
also evaluates the performance of individual directors at the time of their re-election to the Board, in order
to make a decision whether to recommend that a Director be re-elected.
The Board has identified the skills and experience desirable for those on the Board and, further, the Chair
has undertaken an assessment process to identify and confirm which directors hold those skills – refer to
Recommendation 2.2 below.
In FY25, the Board completed an external review of required skills and experience, taking account of both
current and expected future requirements which will be used to guide future Board renewal planning and
process.
Recommendation 1.7:
Have and disclose the process for evaluating the performance of senior executives at least once
every reporting period. Disclose whether a performance evaluation for senior executives has taken
place in the reporting period.
The Board evaluated the performance of senior executives during FY26.
5
CORPORATE GOVERNANCE
STATEMENT
MAXIPARTS LIMITED ACN 006 797 173
FOR THE YEAR ENDED 30 JUNE 2026
The Board reviews the performance of senior executives against key performance indicators (KPIs). The
KPIs are established at the start of a financial year and generally include measures relating to the Group,
the relevant segment and the individual, and include safety, values, financial, people, customers, strategy
and risk measures. The measures are chosen as they directly align the individual’s rewards to the values,
strategy and performance of the Group.
MaxiPARTS Limited has a program of goal setting, regular coaching and monitoring sessions, and annual
performance evaluations for senior executives.
Please refer to the 2026 Remuneration Report for more information about the performance evaluation of
senior executives.
PRINCIPLE 2: STRUCTURE THE BOARD TO ADD VALUE
Recommendation 2.1:
• The Board should have a nomination committee which has at least three members, the
majority of whom are independent directors.
• The Committee should be chaired by an independent director.
• Disclose the charter of the committee, the members of the committee and the attendance
of members at meetings of the committee.
The Board has established a Nomination Committee. All non-executive directors are members of the
Committee (as at 30 June 2026) - Ms Mary Verschuer, Mr Gino Butera, Mr Frank Micallef, Mr Vince De
Santis. Ms Verschuer is the current Chair of the Committee. Majority of the members are independent
directors, including the Chair of the Committee. Information about the independence of the directors is set
out below in relation to Recommendation 2.3.
The 2026 Report of Directors contains details of attendances by directors at Committee meetings and the
relevant qualifications and experience of members of the Committee.
The Charter of the Nomination Committee is available from the Corporate Governance section of the
Group’s website, www.maxipartslimited.com.au/corporate-governance
Recommendation 2.2:
Have and disclose a board skills matrix setting out the mix of skills and diversity that the board
currently has or is looking to achieve in its membership.
The Board has identified the key skills and experience that the Company’s Board is looking to achieve in
its membership, as set out below. The Board is cognisant of the skills it needs to retain and seek in new
directors. The Board also looks for gender diversity within these skill sets.
The following tables and charts illustrate the skills, experience and diversity of the Board as at 30 June
2026.
Board diversity
Gender No. of Directors
Age No. of Directors
Female
1
45-49
1
Male
4
50-59
1
Total
5
60-70
3
Total
5
6
CORPORATE GOVERNANCE
STATEMENT
MAXIPARTS LIMITED ACN 006 797 173
FOR THE YEAR ENDED 30 JUNE 2026
Board skills and experience
Qualifications
No. of directors
(Max. 5)
Professional Experience
No. of directors
(Max. 5)
Accounting / Finance / Economics 4
Accounting 4
Engineering / Science 1
Finance / Investment 4
MBA 1
Manufacturing 4
AICD Member / Fellow 5
Distribution 4
Logistics 3
Engineering 2
Sales & Marketing 4
Professional Services 1
Recommendations 2.3 & 2.4:
A majority of the Board should be independent directors
Disclose the length of service of each director and the names of the directors considered to be
independent directors.
The Board acknowledges that all directors, whether assessed as independent or not, should bring
independent judgement to bear on all Board decisions.
The Board comprises a majority of independent directors. As at 30 June 2026, the Company had four non-
executive directors, majority of whom are considered by the Board to be independent, and one executive
director. None of the non-executive directors has an interest, position or relationship of the type described
in Box 2.3 of the Principles and Recommendations.
Non-Executive Directors
Ms Mary Verschuer (Chair) – Independent
Mr Gino Butera – Independent
Mr Vince De Santis – Shareholder Nominee Director
Mr Frank Micallef – Independent
Executive Director
Mr Peter Loimaranta (Managing Director) – Not Independent
The Company’s Board Charter sets out a number of measures to ensure that all Directors exercise
independent judgement in decision making, including:
• Directors are expected to cast their vote on any resolution in accordance with their own judgement.
• Directors are expected to comply with their legal, statutory and equitable duties when discharging
their responsibilities as directors.
• Directors may access information and seek independent advice that they consider necessary to
fulfil their responsibilities and to exercise independent judgement in decision making.
• Directors are expected to be sensitive to conflicts of interest that may arise and be mindful of their
fiduciary obligations to the Company.
Refer to the 2026 Report of Directors for information about each Director’s length of service.
Recommendation 2.5:
The chair of the Board should be an independent director. The roles of chairperson and chief
executive officer should not be exercised by the same individual.
The Company’s Chair, Ms Mary Verschuer, is considered by the Board to be an independent director.
The roles of Chair and Managing Director are exercised by Ms Mary Verschuer and Mr Peter Loimaranta,
respectively.
7
CORPORATE GOVERNANCE
STATEMENT
MAXIPARTS LIMITED ACN 006 797 173
FOR THE YEAR ENDED 30 JUNE 2026
Recommendation 2.6:
The Company should have a program for inducting new directors and provide appropriate
professional development opportunities for directors to develop and maintain their skills and
knowledge needed to perform their role as directors effectively.
New directors are offered induction programs to allow them to fully and actively participate in decision
making. The induction programs are designed to ensure that any new director has a comprehensive
knowledge of the Company and the industries and markets in which it operates.
Directors and senior executives are encouraged to become members of relevant industry groups and
professional organisations and to update and enhance their skills and knowledge through appropriate
education and training courses.
To assist with understanding the Group’s business operations and the key health and safety risks across
the business, the Board undertakes tours of the Group’s major facilities as part of its annual Board cycle.
PRINCIPLE 3: ACT ETHICALLY AND RESPONSIBLY
Recommendation 3.1:
The Company should articulate and disclose its values.
The Group has the following Values:
• Safety
• Teamwork
• Integrity & Respect
• Commercially Savvy
• Responsiveness
• Customer Focus
The Group includes disclosure and discussion around the Values in all new staff inductions and in
prominent postings in physical and online locations as well as on the Group’s website,
www.maxipartslimited.com.au.
Recommendation 3.2:
Have a code of conduct for directors, senior executives and employees, and disclose that code or
a summary of it.
The Group has a Code of Conduct. All employees, directors, managers and contractors must adhere to
the Code of Conduct, regardless of location or role.
The Code of Conduct is based on the six Values, set out above.
The Group believes that consistent and proper business conduct creates loyalty and trust with our
stakeholders and each other and fosters an appropriate culture. The Code of Conduct demonstrates how
to apply our Values and reflects the Group’s policies and procedures.
The Code of Conduct is available from the Corporate Governance section of the Group’s website,
www.maxipartslimited.com.au/corporate-governance
Recommendation 3.3:
Have and disclose a whistle-blower policy, and ensure the board or a committee of the board is
informed of any material incidents reported under that policy.
The Group has a whistle-blower policy, called “Speaking Up”, which encourages employees, contractors
and others to report unlawful or unethical behaviour. The Speaking Up Policy is available from the
Corporate Governance section of the Group’s website, www.maxipartslimited.com.au/corporate-
governance.
8
CORPORATE GOVERNANCE
STATEMENT
MAXIPARTS LIMITED ACN 006 797 173
FOR THE YEAR ENDED 30 JUNE 2026
The Board is informed of any material incidents reported under the Speaking Up Policy.
Recommendation 3.4:
Have and disclose an anti-bribery and corruption policy and ensure the board or a committee of
the board is informed of any material incidents reported under that policy.
The Group has a Code of Conduct, which includes anti-bribery and corruption provisions. The Code of
Conduct is available from the Corporate Governance section of the Group’s website
www.maxipartslimited.com.au/corporate-governance
The Board is informed of any material breaches of the Code of Conduct.
PRINCIPLE 4: SAFEGUARD INTEGRITY IN CORPORATE REPORTING
Recommendation 4.1:
• The Board should have an audit committee which has at least three members, all of whom
are non-executive directors and a majority of whom are independent directors.
• The committee should be chaired by an independent director, who is not the chair of the
board.
• Disclose the charter of the committee, the relevant qualifications and experience of
members of the committee and the attendance of members at meetings of the committee.
The Board has established an Audit & Risk Management Committee. The Committee comprises (as at 30
June 2026) all of the non-executive directors – Mr Frank Micallef, Ms Mary Verschuer, Mr Vince De Santis
and Mr Gino Butera. The Committee is chaired by an independent director, Mr Frank Micallef.
A majority of the members of the Audit & Risk Management Committee are independent directors.
Information about the independence of the directors is set out above in relation to Recommendation 2.3.
The Charter of the Audit & Risk Management Committee is available from the Corporate Governance
section of the Group’s website www.maxipartslimited.com.au/corporate-governance
The members of the Committee have sufficient accounting and financial expertise, and a sufficient
understanding of the industry in which the Company operates, to be able to discharge the Committee’s
responsibilities effectively.
The 2026 Report of Directors contains details of attendances by directors at Committee meetings and the
relevant qualifications and experience of members of the Committee.
The Committee has the right to obtain access to the external auditors, without management being present.
The Committee also has the right to obtain independent professional advice (including financial,
accounting, legal and tax advice).
Recommendation 4.2:
The board should, before it approves the entity’s financial statements for a financial period, receive
from its CEO and CFO a declaration that, in their opinion, the financial records of the entity have
been properly maintained and that the financial statements comply with the appropriate accounting
standards and give a true and fair view of the financial position and performance of the entity and
that the opinion has been formed on the basis of a sound system of risk management and internal
control which is operating effectively.
In accordance with the Charter of the Audit & Risk Management Committee and section 295A of the
Corporations Act, the Managing Director and Chief Financial Officer of the Company are required to declare
in writing to the Board that, in their opinion, the Group’s financial records have been properly maintained
in accordance with the Corporations Act and that the Group’s consolidated financial statements and
associated notes comply with the relevant accounting standards and present a true and fair view of the
Group's financial position and performance. The declaration is also underpinned by representations from
executive management and relevant accounting officers.
9
CORPORATE GOVERNANCE
STATEMENT
MAXIPARTS LIMITED ACN 006 797 173
FOR THE YEAR ENDED 30 JUNE 2026
The declaration by the Managing Director and Chief Financial Officer must also confirm the existence of a
sound system of risk management and internal compliance and control which reflects the policies adopted
by the Board and that the Group’s risk management and internal compliance and control systems are
operating efficiently and effectively.
Recommendation 4.3:
Disclose the process to verify the integrity of any periodic corporate report released to the market
that is not audited or reviewed by an external auditor.
All periodic reports that are not audited are supported by attestations from management as to the accuracy
of the information included and approved by the Board.
PRINCIPLE 5: MAKE TIMELY AND BALANCED DISCLOSURES
Recommendation 5.1:
Establish a written policy for complying with the continuous disclosure obligations under the ASX
Listing Rules.
The Company is committed to complying with its continuous disclosure obligations to keep the market fully
informed of information which may have a material effect on the price or value of the Company’s shares.
The Company has adopted a Continuous Disclosure Protocol to enable the Company to comply with the
continuous disclosure obligations under the ASX Listing Rules. The Protocol is available from the Corporate
Governance section of the Group’s website, www.maxipartslimited.com.au/corporate-governance. The
Protocol sets out the responsibilities of the Board, the Company Secretary and managers in relation to
continuous disclosure. The Protocol also sets out the requirements to be followed in relation to discussions
with analysts and the media.
ASX announcements are made available on the Group’s website after they are released to ASX.
Recommendation 5.2:
Ensure that the board receives copies of all material market announcements promptly after they
have been made.
The Continuous Disclosure Protocol requires that the Board is given a copy of all material market
announcements promptly after their release.
Recommendation 5.3:
Release a copy of presentation materials for any new and substantive investor or analyst
presentation on the ASX Market Announcements Platform ahead of the presentation.
The presentation materials for any investor or analyst presentation are released to the market ahead of the
presentation occurring.
PRINCIPLE 6: RESPECT THE RIGHTS OF SHAREHOLDERS
Recommendation 6.1:
Disclose information about the company and its governance to shareholders via its website.
The Group’s website, www.maxipartslimited.com.au contains information about the Group including key
people, annual reports, the share price, key corporate governance documents and ASX announcements.
Recommendation 6.2:
Design and implement an investor relations program to facilitate effective two way communication
with investors.
10
CORPORATE GOVERNANCE
STATEMENT
MAXIPARTS LIMITED ACN 006 797 173
FOR THE YEAR ENDED 30 JUNE 2026
The Company respects the rights of shareholders and seeks to facilitate the effective exercise of those
rights. The Company has an Investor Relations Policy which sets out the way that the Company
communicates effectively with shareholders, gives shareholders ready access to balanced and
understandable information about the Company, responds to individual enquiries and encourages
shareholders to participate in general meetings.
The Investor Relations Policy is available from the Corporate Governance section of the Group’s website,
www.maxipartslimited.com.au/corporate-governance
Recommendation 6.3:
Disclose how participation of security holders at meetings is facilitated and encouraged.
The Company encourages shareholders to attend and actively participate in its annual general meetings.
The Company’s Investor Relations Policy is available from the Corporate Governance section of the
Group’s website, www.maxipartslimited.com.au/corporate-governance
Notices of meeting are drafted in plain English to be easy and clear to understand. They are honest,
accurate and not misleading. Meetings are held during normal business hours and at a convenient location.
Recommendation 6.4:
Ensure that all substantive resolutions at a meeting of security holders are decided by a poll rather
than by a show of hands.
The Company has a practice of conducting a poll for all resolutions put to security holders in general
meeting.
Recommendation 6.5:
Provide shareholders with the option to receive communications from, and send communications
to, the Company and its share registry electronically.
The Company publishes information on the Group’s website and sends information to shareholders by mail
or e-mail (where nominated). Shareholders may contact Computershare on 1300 85 05 05 (Australia) or
+61 3 9415 4000 (Overseas) if they wish to elect to receive communications by email.
PRINCIPLE 7: RECOGNISE AND MANAGE RISK
Recommendation 7.1:
• The Board should have a committee to oversee risk.
• The committee should have at least three members, a majority of whom are independent
directors.
• The committee should be chaired by an independent director.
• Disclose the charter of the committee, the members of the committee and attendance of
members at committee meetings.
The Audit & Risk Management Committee assists the Board in reviewing the risk management and internal
compliance and control systems of the Group.
As outlined above, the Committee comprises (as at 30 June 2026) all of the non-executive directors – Mr
Frank Micallef, Ms Mary Verschuer, Mr Vince De Santis and Mr Gino Butera. The Committee is chaired by
an independent director, Mr Frank Micallef.
Information about the independence of the directors is set out above in relation to Recommendation 2.3.
The Charter of the Audit & Risk Management Committee is available from the Corporate Governance
section of the Group’s website, www.maxipartslimited.com.au/corporate-governance/
The 2026 Report of Directors contains details of attendances by directors at Committee meetings and the
relevant qualifications and experience of members of the Committee.
11
CORPORATE GOVERNANCE
STATEMENT
MAXIPARTS LIMITED ACN 006 797 173
FOR THE YEAR ENDED 30 JUNE 2026
Recommendation 7.2:
The board or one of its committee should review the company’s risk management framework at
least annually to satisfy itself that it continues to be sound and disclose whether such a review has
taken place.
The Risk Management Framework sets out the process that will be followed to identify, assess and manage
risk across the Group. The risk methodology used by MaxiPARTS Limited to identify, analyse, assess,
evaluate, treat, monitor and report on risks is based on the practices outlined by the ISO31000:2018 Risk
Management Guidelines.
The Audit & Risk Management Committee reviewed the Risk Management Framework during FY26.
Where appropriate, specific risk management policies and frameworks are also established by MaxiPARTS
Limited to identify and analyse specific risks faced by the Group, to set appropriate risk controls, and to
monitor risks and adherence to limits and controls. This includes policies in relation to the health and safety
of employees and financial controls.
Recommendation 7.3:
Disclose if the Company has an internal audit function, how it is structured and what role it
performs. If not, disclose that fact and the processes the Company employs for evaluating and
continually improving the effectiveness of its risk management and internal control processes.
The Group does not have a separate internal audit function due to its relatively small size and less complex
financial and organisational structures. The Board has received assurance from the Chief Executive Officer
and the Chief Financial Officer that the declaration provided in accordance with section 295A of the
Corporations Act is founded on a sound system of risk management and internal control and that the
system is operating effectively in all material respects in relation to financial reporting risks.
Recommendation 7.4:
Disclose whether the Company has material exposure to environmental or social risks and, if it
does, how it manages or intends to manage those risks.
Please refer to the 2026 Report of Directors for information about the material risks faced by the Group.
PRINCIPLE 8: REMUNERATE FAIRLY AND RESPONSIBLY
Recommendation 8.1:
• The Board should establish a remuneration committee.
• The committee should have at least three members, a majority of whom are independent
directors.
• The committee should be chaired by an independent director.
• Disclose the charter of the committee, the members of the committee and attendance of
members at committee meetings.
The Board has established the Remuneration & Human Resources Committee. The Committee comprises
all of the non-executive directors (as at 30 June 2026) – Mr Gino Butera, Mr Vince De Santis, Mr Frank
Micallef and Ms Mary Verschuer. The Committee is chaired by an independent director, Mr Gino Butera.
Majority of the members are independent directors. Information about the independence of the directors is
set out above in relation to Recommendation 2.3.
The Charter of the Committee is available from the Corporate Governance section of the Group’s website
www.maxipartslimited.com.au/corporate-governance
The 2026 Report of Directors contains details of attendances by directors at Committee meetings and the
relevant qualifications and experience of members of the Committee.
12
CORPORATE GOVERNANCE
STATEMENT
MAXIPARTS LIMITED ACN 006 797 173
FOR THE YEAR ENDED 30 JUNE 2026
Recommendation 8.2:
Disclose the policies and practices regarding the remuneration of non-executive directors and the
remuneration of executive directors and other senior executives.
Non-executive directors receive a fixed fee and are not entitled to termination benefits or incentives. Fees
paid to non-executive directors are periodically benchmarked against similar companies. Non-executive
directors are not entitled to participate in any executive equity incentive scheme.
Executive directors have access to salary, termination benefits in certain circumstances, superannuation
benefits, short term incentives and long term incentives.
Letters of appointment for directors set out their remuneration entitlements.
Details of the remuneration paid to non-executive directors, executive directors and key management
personnel are set out in the 2026 Remuneration Report.
Recommendation 8.3:
Establish a policy on whether participants in an equity-based remuneration scheme are permitted
to enter into transactions (whether through the use of derivatives or otherwise) which limit the
economic risk of participating in the scheme. Disclose that policy or a summary of it.
The rules of the Company’s Performance Rights Plan prohibit executives from entering into transactions to
limit the economic risk of participating in the Plan. This Plan is the only equity-based remuneration scheme
available to employees of MaxiPARTS Limited.
Recommendations 9.1, 9.2 and 9.3.
None of Recommendations 9.1, 9.2 or 9.3 apply to the Company.
This Corporate Governance Statement has been approved by the Board of MaxiPARTS Limited.